1. DL manuals
  2. RAIS
  3. Wood stove
  4. RAIS Q-BIC
  5. User Manual

RAIS RAIS Q-BIC User Manual

Manual is about: RAIS Q-BIC; Q-BIC INSERT Wood burning stove

Summary of RAIS Q-BIC

  • Page 1

    English rais - manual for q-bic & q-bic insert 1 u s e r m a n u a l rais q-bic & rais q-bic insert.

  • Page 2

    W e cannot be held r esponsible for any misprints..

  • Page 3

    English rais - manual for q-bic & q-bic insert 3 rais q-bic rais q-bic insert date: march 2008 modified: c introduction .................................................................................................................................. 4 warranty .........................................

  • Page 4

    English rais - manual for q-bic & q-bic insert 4 introduction thank you for purchasing a rais wood burning stove. In the uk the stove has been approved by hetas ltd as an intermittent operating appliance for burning wood logs only. A rais wood burning stove is more than just a heat source: it also s...

  • Page 5

    English rais - manual for q-bic & q-bic insert 5 rais q-bic 106 rais q-bic 127 rais q-bic insert nominal output (kw): 4,5 4,5 4,5 min./max. Output(kw): 2-6 2-6 2-6 heating ar ea (m 2 ) ca. 80 ca. 80 ca. 80 stove’ s width/depth/height (mm) 404-404-1060 404-404-1270 426-418-850 combustion chamber’ s w...

  • Page 6

    English rais - manual for q-bic & q-bic insert 6 convection rais stoves are convection stoves. This means that the stove’s back and side panels are not over-heated. Convection means that there is a circulation of air, which ensures that the heat is distributed more evenly throughout the entire room....

  • Page 7

    English rais - manual for q-bic & q-bic insert 7 installation instructions the following pages give instructions for the safe and proper installation of this heating ap- pliance in the uk. These instructions cover the basic principles of installation, although detail may need slight modification to ...

  • Page 8

    English rais - manual for q-bic & q-bic insert 8 chimney the chimney is the driving force which makes the stove function. In order for the stove to perform satisfactorily the chimney height must be sufficient to ensure the correct draught of 14 to 18 pa so as to clear the products of combustion and ...

  • Page 9

    English rais - manual for q-bic & q-bic insert 9 if it is found that there is excessive draught in the chimney then either an adjustable flue damper or alternatively a draught stabiliser should be fitted. The adjustable flue damper should not close off the flue entirely but should in its closed posi...

  • Page 10: Q-Bic

    English rais - manual for q-bic & q-bic insert 10 manufacturer’s plate for q-bic en 13240:2001+a2:2004 ec.Nr. 705 anordning til intervalfyring produktdokumentation sintef producent afstand til brændbart, bagvæg afstand til brændbart, sidevæg afstand til brændbart, drejefod : (360°) co emission røgga...

  • Page 11

    English rais - manual for q-bic & q-bic insert 11.

  • Page 12

    English rais - manual for q-bic & q-bic insert 12 installation instructions - q-bic insert first loosen the screw in upper right corner and the screw in lower left corner (both door side) - do not onscrew entirely - now it’s possible to remove the insert from the cassette. Prefaration of cassette di...

  • Page 13

    English rais - manual for q-bic & q-bic insert 13 the legs are fixed onto the box and this is then placed in the desired position. For panelled wall, all 3 legs are used and for brick wall, only the back leg is used. Assembly the topplate with the following self-drilling screws. By a brick wall: the...

  • Page 14

    English rais - manual for q-bic & q-bic insert 14 fitting hole for brick wall fitting holes for angle brace for panelled wall. Attention!! Important that the cassette is posotion in 90° angel and levelled both horizontal an vertical..

  • Page 15

    English rais - manual for q-bic & q-bic insert 15 assembly the stove in cassette lift the stove up onto the base plate and place it as shown in the picture on the left. Nb!! Basic settings on the adjusting bolts are approx. 32.5 mm (between the bottom of the stove's base and the base plate on the in...

  • Page 16

    English rais - manual for q-bic & q-bic insert 16 push the insert until the front is in level with the wall. Afterwards push the insert from the other side until it is in level with the other wall. The screws - in upper right corner and lover left corner - you started loosen (page 8), is fastened..

  • Page 17

    English rais - manual for q-bic & q-bic insert 17.

  • Page 18

    English rais - manual for q-bic & q-bic insert 18 h -h h h 30 0 m in . 858 41 7 500 min . 10 0 42 5 m in . A re al ia lt 25 0 cm ² m in . A re al ia lt 50 0 cm ² 516 52 4 186 18 5 16 0 425 41 7 51 6 524 10 0 100 198 19 7 743 min . 73 4 m in . M in . 2 00 min . 2 00 obs!!! Hullerne i bunden må ikke d...

  • Page 19

    English rais - manual for q-bic & q-bic insert 19 a -a a a min . 3 00 858 41 7 42 5 m in . A re al ia lt 25 0 cm ² m in . A re al ia lt 50 0 cm ² 425 41 7 434 min . 42 6 m in . 643 min . 61 7 m in . 10 15 15 23 2 233 30 0 300 g ul vp la de ~ ~ 64 3 m in . 61 7 m in . ~ ~ a nb ef al et a fs ta nd m i...

  • Page 20

    English rais - manual for q-bic & q-bic insert 20 using not insulated smoke pipe, the minimum distance to combustible wall must be 225 mm from smoke pipe. Installation distance in case of non-combustible wall we recommend a minimum distance to non-combustible material of 50 mm (f) for cleaning consi...

  • Page 21

    English rais - manual for q-bic & q-bic insert 21 normal set-up (right-angle) secure base a. Distance to furniture 750 mm distance to flammable materials: b. - in front (floor) 300 mm c. - to the side (floor) 150 mm d. - to the rear (floor) 350 mm e. - to the side of the wall 350 mm.

  • Page 22

    English rais - manual for q-bic & q-bic insert 22 corner set-up 45° fixed socket a. Distance to furniture 750 mm distance to flammable materials: b. - in front (floor) 300 mm c. - to the side (floor) 150 mm d. - to the rear (wall) 200 mm e. - to the side of the wall 500 mm 360° swivel base a. Distan...

  • Page 23

    English rais - manual for q-bic & q-bic insert 23 for the installer finally before firing the stove for the first time a check should be made to ensure that the assembly and stove installation has been satisfactory and that there are no leaks in any seals in the appliance and appliance connections t...

  • Page 24

    English rais - manual for q-bic & q-bic insert 24 operating instructions please note that hetas approval only covers the use of wood in the stove and approval does not cover the use of other fuels either alone or mixed with other fuels, nor does it cover instructions for the use of other fuels. Fuel...

  • Page 25

    English rais - manual for q-bic & q-bic insert 25 drying and storage drying wood takes time: proper air drying takes approx. 2 years. Here are some tips: store the wood sawn, split and stacked in an airy, sunny place, which is protected against rain (the south side of the house is particularly suita...

  • Page 26

    English rais - manual for q-bic & q-bic insert 26 using the wood burning stove adjustment of the air damper. The damper has 3 settings. Position 1 the air damper is closed, which means no air supply. Position 2 push the handle to the left, to wher the marking is. This position gives full secondary a...

  • Page 27

    English rais - manual for q-bic & q-bic insert 27 rais q-bic insert position 2 push the handle to the left, to wher the marking is. This position gives full secondary air. During normal stoking the lever is set between posi- tion 1 and 2. When the flames are clear and yellow, the damper is set corre...

  • Page 28

    English rais - manual for q-bic & q-bic insert 28 first usage a careful start pays off. Start with a small fire, so that the wood burning stove can get accus- tomed to the high temperature. This gives the best start and any damage is avoided. Be aware that a strange but harmless odour and smoke conc...

  • Page 29

    English rais - manual for q-bic & q-bic insert 29 lighting and fuelling tips before firing up: open a door or window close to the wood burning stove. If there is a “storm” in the stove coming from the chimney, it is advisable to place a screwed-up piece of newspaper between the upper baffle plate an...

  • Page 30

    English rais - manual for q-bic & q-bic insert 30 when the flames are clear - after approx. 5-10 min. - close the door. Damper - see adjustment of air damper. After approx. 10-20 min. - when you have a good bed of glowing embers - add 2-3 pieces of wood. Leave the door ajar until the fire has caught...

  • Page 31

    English rais - manual for q-bic & q-bic insert 31 cleaning and care the wood burning stove and the chimney must be serviced by a chimney sweep once a year. During cleaning and care, the stove must be cold. If the glass is sooty: - moisten a piece of paper or newspaper, dip it in the ash, and rub the...

  • Page 32

    English rais - manual for q-bic & q-bic insert 32 the fixing clips are pushed up and removed from the ska- mol on the side. The fixing clips is placed in the top right corner of the firebox. The picture on the left is a detailed view of the top right corner of the firebox (a close-up of the area is ...

  • Page 33

    English rais - manual for q-bic & q-bic insert 33 interruption of operation smoke spillage around door: could be due to too low draught in the chimney - check whether the flue or chimney is blocked - check whether the extraction hood is switched on; if it is, switch it off and open a win- dow/door i...

  • Page 34

    English rais - manual for q-bic & q-bic insert 34 spare parts diagram - rais q-bic 106 pos. Number item no./description 1 1/1 706060290 / 95 top plate 2 1 706010490 / 95 steel back panel 3 1 706010590/95 fixed window 4 1 706010190 / 95 steel side panel 5 1 7061090/95 door 6 1 7060905sv handle for ai...

  • Page 35

    English rais - manual for q-bic & q-bic insert 35.

  • Page 36

    English rais - manual for q-bic & q-bic insert 36 spare parts diagram - rais q-bic 127 pos. Number item no./description 1 1/1 706060290 / 95 top plate 2 1 706010490 / 95 steel back panel 3 1 706010590/95 fixed window 4 1 706010190 / 95 steel side panel 5 1 7061090/95 door 6 1 7060905sv handle for ai...

  • Page 37

    English rais - manual for q-bic & q-bic insert 37.

  • Page 38

    English rais - manual for q-bic & q-bic insert 38 spare parts diagram - rais q-bic insert pos. Number item no. / description 1 1 707170190/95 complete front 2 1 706010590/95 fixed window 3 1 7061090/95 door 4 1 7060905sv handle for air control 5 1 7061301 smoke connector 6 1 7062200 set of skamol st...

  • Page 39

    English rais - manual for q-bic & q-bic insert 39 6 2 10 4 3 9 1 7 5 8.

  • Page 40

    Rais a/s industrivej 20 dk-9900 frederikshavn www.Rais.Dk.