RAIS VIVA L Series Installation & Operation Manual - page 36
15 / 34
OPERATING INSTRUCTIONS
FOR OEM USE ONLY
© 2016 Mertik Maxitrol GmbH & Co. KG,
All Rights Reserved.
3. The function icon will continue to flash until activation is com-
plete. Activation is complete when the function icon is dis-
played.
The following Functions can be Deactivated / Activated
▪ CHILD PROOF
▪ PROGRAM MODE
▪ THERMOSTATIC MODE (also deactivates PROGRAM MODE)
▪ ECO MODE
▪ LIGHT / DIMMER OPERATION
▪ CIRCULATING FAN OPERATION
▪ AUXILIARY FEATURE
▪ COUNTDOWN TIMER
MYFIRE APP SETUP
NOTICE
For myfire App setup, you will need your Wi-Fi Network SSID
and password.
***
For more detailed setup/operating instructions refer to
www.myfireapp.com
***
INITIAL SETUP
1. Download myfire App from Apple App Store or Google Play
Store.
2. Touch screen to start App setup.
3. Choose language, temperature (C° or F°) and time format
(12 or 24 hour).
REGISTRATION
NOTE:
You must register before logging in. Registration is one
time only.
1. Fill in data and accept the “Privacy Policy”.
2. Touch “OK” in pop-up notice.
3. Touch link to confirm email verification.
4. You will be shown a message that you have successfully reg-
istered the myfire App.
5. Return to App.
LOGIN
1. Fill in your registration password.
2. Accept “Terms and Conditions”.
3. Touch the “Login” button.
CONNECT SMART DEVICE TO NEW MYFIRE WI-FI BOX
1. Touch the icon.
2. A message will tell you to go to your smart device Wi-Fi settings.
3. Touch myfire_WiFi-Box_
4. Enter the password “MYFIREPLACE”.
CONNECT MYFIRE WI-FI BOX TO WI-FI ROUTER
NOTE:
The connecting process may take between 1 – 10 minutes.
After successful connection a pop-up will tell you to go to your
smart device Wi-Fi settings.
1. Select a name for your fire.
2. Type in the name (SSID) of your Wi-Fi Router.
3. Type in the password of your Wi-Fi Router.
4. Touch “Connect” button.
GENERAL NOTES
NOTICE
Wiring of valve and receiver must be completed before starting
ignition. Failure to do so could damage the electronics.
Batteries – Handset
▪ Low battery indicator on handsets.
Batteries – Receiver
▪ Low battery indication: frequent beeps for 3 seconds when mo-
tor turns.
▪ An AC mains adapter may be used instead of batteries.
▪ The V module for fan speed control and light / dimmer provides
the receiver with power. The batteries in the receiver can be
used for automatic backup in case of power outage.
▪ Without using a mains adapter, battery replacement is recom-
mended at the beginning of each heating season.
▪ Old or dead batteries should be removed immediately. If left
in the unit the batteries can overheat, leak, and / or explode.
▪ Do NOT expose batteries (including during storage) to direct
sunlight, excessive heat, fire, moisture, or severe impact. Each
of these conditions can cause the batteries to overheat, leak,
and / or explode.
▪ Batteries must be kept within their recommended temperature
limits. (Ambient battery temperature range: 32 °F to 131 °F
[0 °C to 55 °C].)
▪ New and old batteries and different brands of batteries should
not be used together. Mixing of various batteries can cause
the batteries to overheat, leak, and / or explode.
Software Version
Press and buttons simultaneously. Software version is dis-
played.
Handset Model Number
Press and buttons simultaneously. Handset model number
is displayed.
Handset One Button and Two Button Ignition
Change from one button to two button ignition (Default Setting)
or vice versa by pressing and holding button for 10 sec. im-
mediately after installing batteries.
is displayed and
or
(one or two button ignition) is flashing. When change is complete
changes to or vice versa.
Deactivate Functions
1. Install batteries. All icons are displayed and flashing.
2. While the icons are flashing, press the relevant function button
and hold for 10 sec.
3. The function icon will flash until deactivation is complete. De-
activation is complete when the function icon and two horizon-
tal bars are displayed.
NOTE:
If a deactivated button is pressed, there is no function,
and two horizontal bars are displayed.
NOTE:
Deactivation remains in effect after change of batteries.
Activate Functions
1. Install batteries. All icons are displayed and flashing.
2. To activate a function, press the relevant button and hold for
10 sec.
OPERATING INSTRUCTIONS