- DL manuals
- Raisonance
- Motherboard
- REva v3
- User Manual
Raisonance REva v3 User Manual
Summary of REva v3
Page 1
Reva raisonance universal evaluation board motherboard (version 3 onwards) user guide document version 2010-06-01.
Page 2: Contents
Reva v3 user guide contents 1. Introduction................................................................................................................4 1.1 purpose of this manual....................................................................................................................4...
Page 3
Reva v3 user guide 3.10 wrapping zone.............................................................................................................................14 4. Rlink..................................................................................................................................
Page 4: 1. Introduction
1. Introduction reva v3 user guide 1. Introduction the reva is a universal evaluation board that has been designed for quick and easy evaluation of a wide range of microcontrollers. It is made up of a generic reva motherboard with an embedded rlink in-circuit programmer and debugger, and a daughter ...
Page 5: 2. Reva V3 Overview
Reva v3 user guide 2. Reva v3 overview 2. Reva v3 overview this chapter gives an overview of the reva package and the physical characteristics of the motherboard. 2.1 key features the reva's key features include: ● digital and analog i/o evaluation features including on-board leds, buttons, switches...
Page 6: Rlink
2. Reva v3 overview reva v3 user guide reva motherboard with embedded rlink: sample daughter boards: - 6 - rlink.
Page 7: 3. Reva Motherboard
Reva v3 user guide 3. Reva motherboard 3. Reva motherboard this chapter describes the reva's evaluation features and their limitations. Features are grouped into thematic areas. 3.1 power supply you can choose the voltage to be used on the whole reva board as well as on the daughter board. From the ...
Page 8
3. Reva motherboard reva v3 user guide power supply configuration mode scheme regulated voltage supplied from the jack ● the voltage of v dd is automatically configured on the daughter board ● to be used with an external isolated and filtered power supply (typically 9v, but 6v is recommended for v d...
Page 9
Reva v3 user guide 3. Reva motherboard 3.2 daughter board connection the reva motherboard must be used with either a daughter board or an external target board. This area can connect to a daughter board featuring a target microcontroller for evaluation. This area may also be used to connect the reva...
Page 10
3. Reva motherboard reva v3 user guide 3.5 digital outputs area this area provides the user with simple visible debug tools. 3.5.1 features the features of this area are: ● 8 red transistor-driven leds that light up when the command is low. Current is supplied by the power supply (9v or usb) and not...
Page 11
Reva v3 user guide 3. Reva motherboard 3.6 digital inputs area this area provides the user with immediately usable digital i/os that can be used as interrupt sources or general purpose i/os. 3.6.1 features the features of this area are: ● 1 two-position jumper to choose the polarity of the bt6 push ...
Page 12
3. Reva motherboard reva v3 user guide 3.7 analog area this area groups features where the user validates the analog features of a target microcontroller. 3.7.1 features the features of this area are: ● a four-position analog connector, including: ● two analog inputs that can be connected directly t...
Page 13
Reva v3 user guide 3. Reva motherboard 3.8 communication area this area groups the connectors for several communication standards. 3.8.1 features i²c ● a three-position connector for i²c communication. ● pull-up resistors on the scl and sda lines (useful at the end of the i²c line). ● an i²c eeprom ...
Page 14
3. Reva motherboard reva v3 user guide 3.9 secondary serial / can area this area allows the use of other serial communication protocols (can for example). It contains a db9 connector with no driver and no other hardware. To use this area, the daughter board must be equipped with the corresponding bu...
Page 15: 4. Rlink
Reva v3 user guide 4. Rlink 4. Rlink the reva v3 contains an embedded rlink. However, it is still possible to connect an external rlink. The functionality of this embedded version of rlink v3 is the same as the standalone version. This chapter details the configurations available for protocols and e...
Page 16
4. Rlink reva v3 user guide 4.2 target/rlink configuration the following descriptions are an overview of the steps required to configure the target and rlink. Note : refer to the relevant getting started manual for daughterboard specific details. 4.2.1 using the embedded rlink to debug/program the r...
Page 17: 5. Daughter Boards
Reva v3 user guide 5. Daughter boards 5. Daughter boards the daughter boards contain all the components dedicated to a specific target microcontroller, including the microcontroller itself, a clock selector and other device dependent features. This chapter provides general purpose considerations abo...
Page 18
5. Daughter boards reva v3 user guide 5.2 dedicated documentation each reva daughter board is described in a document dedicated to the family of microcontrollers it is based on. All these documents can be found in the same folder as this file. • for daughter boards based on st7 microcontrollers read...
Page 19: 6. Motherboard Schematics
Reva v3 user guide 6. Motherboard schematics 6. Motherboard schematics this section groups the schematics for version 3.3 of the reva motherboard. Only the schematics for the evaluation part of the board are provided, not those of the rlink part. For readability purposes, the motherboard schematics ...
Page 20
6. Motherboard schematics reva v3 user guide - 20 -.
Page 21: 7. Conformity
Reva v3 user guide 7. Conformity 7. Conformity rohs compliance raisonance products are certified to comply with the european union rohs (restriction of hazardous substances) directive (2002/95/ec) which restricts the use of six hazardous chemicals in its products for the protection of human health a...
Page 22: 8. Glossary
8. Glossary reva v3 user guide 8. Glossary term description can controller area network serial communication protocol dimm dual in-line memory module eeprom electrically-erasable programmable read-only memory gnd ground icc in-circuit communication protocol lcd liquid crystal display led light-emitt...
Page 23
Reva v3 user guide 8. Glossary alphabetical index additional help or information..............................4 analog area.......................................................12 communication area.........................................13 conformity..................................................
Page 24
8. Glossary reva v3 user guide history date description september 2007 initial version for reva v3. October 2007 updated schematics, peripherals and rlink sections. October 2008 applied new template. June 2009 readability improved. March 2010 corrections about voltage and removed information about b...
Page 25
Reva v3 user guide 8. Glossary - 25 - disclaimer information in this document is subject to change without notice and does not represent a commitment on the part of the manufacturer. The software described in this document is provided under license and may only be used or copied in accordance with t...