Rally 7471 Manual
GENERAL, WORK AREA & PERSONAL SAFETY
WARNING: Do not operate or place this device near flammable materials or any
location, which accumulates flammable fumes.
WARNING: Working around lead-acid batteries may be dangerous. Lead-acid
batteries generate explosive gases during normal charging and jump-starting
operations.
WARNING: All lead-acid batteries (car, truck and boat) produce hydrogen gas,
which may violently explode in the presence of fire or sparks. Do not smoke, use
matches, lighters or open flame near batteries.
WARNING: Avoid dropping metal tools onto the vehicle battery. It might spark
or short circuit the battery or other electrical part that may cause short circuits or
explosion.
WARNING: If contact with battery acid occurs, rinse immediately and thoroughly
with water, then wash with soap and water. Get immediate medical attention
if redness, irritation or pain is present. For eye contact, flush eyes for at least 15
minutes and get immediate medical attention.
WARNING: Stay clear of fan blades, belts, pulleys and moving parts that can cause
bodily injury during battery jump-start.
WARNING: Remove personal metal items such as rings, bracelets, necklaces and
watches while working with a lead-acid battery. It can produce a short-circuit high
enough to cause a severe burn.
• Make sure fresh water & soap are available nearby in case battery acid
contacts skin, eyes or clothing.
• Do not submerge device in water, or expose it to heavy moisture or rain.
• Always keep the booster clamps in their storage holders to prevent sparking
when recharging and when they are not in use.
• This device is not intended for use in the rain or temperatures above 104˚F.
• This device has no consumer serviceable parts, except the inverter
replaceable fuse.
• Do not attempt to remove or replace the battery used in this device. When the
battery has reached the end of it’s useful lifetime, take the entire device to a
battery recycling facility for proper disposal and /or battery replacement.
• It is highly recommended that this device be operated by two persons. Ensure
that someone is available to give assistance, if needed.
• Wear complete eye and clothing protection. Do not touch eyes while working
near battery.
• Do not operate this device while wearing vinyl clothing. Static electricity sparks
may be generated when vinyl clothing is rubbed.
• Do not face the battery. Stay as far as possible from the vehicle battery being
jumped when making final connection.
• This is not a toy. Keep out of reach of children!
NOTICE: Prior to use, read and understand all warnings, cautions and instructions
included in this instruction manual, and those published by your vehicle battery
manufacturer and manufacturer of any device intended to be used with this unit.
Failure to follow all instructions and abide by all cautions and warnings could result
in personal injury, injury to others and property damage. Retain this manual for
future use.
SPECIFICATIONS
Built-in battery
8-amp hour (Ah) sealed, lead-acid, maintenance-
free, spill-proof, rechargeable
DC socket
12 Volt DC (15 Amp replaceable blade fuse)
USB port
5 Volt DC / 2.1A
LED light
12 Volt DC / 330 mA
Power inverter
140 Watt
Air compressor
150 PSI
Circuit breaker
Internal, Auto-reset (after 60 seconds)
Net weight
10.6 lbs.
Unit dimensions
9.14 in. ( h ) x 6.97 in. ( w ) x 12.2 in. ( d )
Storage
temperature
(-4ºF - 140ºF) (-20ºC - 60ºC). Store in a cool, dry,
well-ventilated area with overhead cover.
Operation
temperature
(32ºF - 104ºF) (0ºC - 40ºC). Operate in a dry, well-venti-
lated area and place device on a leveled surface.
FEATURES
BOOSTER CABLES POWER SWITCH: Heavy-duty rotary switch turns power off to
booster cables when not in use. Power can be turned on by turning the rotary
switch in the clockwise direction.
POWER STATUS & CHARGE INDICATOR:
Red LED = Battery charging
Amber LED = Battery charged at mid-level
Green LED = Battery is fully charged
HAND GENERATOR: Manually charges device battery in remote areas.
HAND GENERATOR CHARGE INDICATOR: LED indicator illuminates when battery
is being charged (blinking).
CONVENIENT CHARGE CORDS: 120 Volt AC charger for in home use & 12 Volt DC
charger for on the road use.
12 VOLT DC POWER OUTLET WITH OVERLOAD PROTECTION: Provides power to
most 12 Volt DC accessories equipped with a 12 Volt DC accessory plug. Device
circuit is protect with an auto-reset overload circuit breaker and a replaceable
15A fuse on front panel.
HEAVY-DUTY BOOSTER CLAMPS: 200 AMP rated color-coded battery clamps.
PROFESSIONAL QUALITY CABLES: Color-coded cables with extra-thick, oil-resistant,
external-cable insulation sheathing.
BOOSTER CLAMPS STORAGE HOLDERS: Prevents accidental sparking when cables
are not in use.
REVERSE BATTERY POLARITY DETECTION CIRCUITRY: Circuitry automatically
activates if accidental reverse polarity clamp connection occurs. Red LED illuminates
accompanied by a high pitch alarm.
BUILT-IN POWERFUL 150 PSI COMPRESSOR:
• Compressor power switch.
• Accurate air-pressure dial gauge with large and easy to read pressure
increments in
(PSI) and
units.
• Heavy-duty, high-pressure inflator rubber air-hose with an universal air valve
stem quick-connector nozzle.
• Nozzle adaptors for inflatables.
STANDARD 5 VOLT USB PORT: Switch-activated standard USB port for personal
devices.
140 WATT POWER INVERTER: Switch-activated power inverter provides portable
power to 120 Volt AC devices.
LED LIGHT: Provides long-lasting portable lighting with emergency flasher function.
No. 7471
8-IN-1 PORTABLE POWER SOURCE
with Unit Battery Hand Generator
DC 12V
SOCKET