1. DL manuals
  2. RAM
  3. Automobile
  4. 2011 Chassis Cab
  5. Owner's Manual

RAM 2011 Chassis Cab Owner's Manual

Other manuals for 2011 Chassis Cab: Owner's Manual
Manual is about: Chrysler 2011 Ram Truck Chassis Cab Owner's Manual

Summary of 2011 Chassis Cab

  • Page 1

    C h a s s i s c a b chrysler group llc o w n e r ’ s m a n u a l 2 0 1 1 2 0 1 1 r a m t r u c k c h a s s is c a b 11dd43-126-ac second edition printed in u.S.A. Ram truck.

  • Page 2: Table Of Contents

    Table of contents section page 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 things to know before starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 3 understanding the featu...

  • Page 4: Introduction

    Introduction contents 䡵 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 how to use this manual . . . . . . . . . . . . . . . . . . 4 䡵 warnings and cautions . . . . . . . . . . . . . . . . . . . 6 䡵 van conversions/campers . . . . . . . . . . . . . . . . . 6 䡵 vehicle identifi...

  • Page 5

    Introduction congratulations on selecting your new chrysler group llc vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This owner’s manual has been prepared with the assis- tance of service and ...

  • Page 6

    Introduction 5.

  • Page 7

    Warnings and cautions this owner’s manual contains warnings against op- erating procedures that could result in an accident or bodily injury. It also contains cautions against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important info...

  • Page 8

    Note: it is illegal to remove or alter the vin. Vehicle modifications/alterations warning! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. Vehicle identification number 1 introduct...

  • Page 10: Contents

    Things to know before starting your vehicle contents 䡵 a word about your keys . . . . . . . . . . . . . . . . . 12 ▫ wireless ignition node (win) — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . 12 ▫ key fob . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 ▫ removing key fob f...

  • Page 11

    ▫ remote open window feature — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . 23 ▫ using the panic alarm . . . . . . . . . . . . . . . . . 24 ▫ programming additional transmitters . . . . . . 24 ▫ transmitter battery replacement . . . . . . . . . . 24 ▫ general information . . . . . ....

  • Page 12

    ▫ driver and right front passenger supplemental restraint system (srs) – airbag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 ▫ airbag system components . . . . . . . . . . . . . . 51 ▫ advanced front airbag features . . . . . . . . . . 51 ▫ airbag deployment sensors and controls . . ...

  • Page 13

    A word about your keys key fob with remote keyless entry (rke) — if equipped your vehicle uses a keyless ignition system. This system consists of a key fob with remote keyless entry (rke) transmitter and a wireless ignition node (win) with integral ignition switch. You can insert the key fob into th...

  • Page 14

    Key fob the key fob operates the ignition switch. It also contains the remote keyless entry (rke) transmitter and an emergency key, which stores in the rear of the key fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the rke transmitter go dead. You can k...

  • Page 15

    To remove the emergency key, slide the mechanical latch at the top of the key fob sideways with your thumb and then pull the key out with your other hand. Note: you can insert the double-sided emergency key into the lock cylinder with either side up. Removing key fob from ignition place the shift le...

  • Page 16

    Information center (evic) /personal settings (customer- programmable features)” in “understanding your in- strument panel” for further information. Warning! • never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others cou...

  • Page 17

    Sentry key 姞 the sentry key 威 immobilizer system prevents unautho- rized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked. The system uses a key fob with a factory-mated remot...

  • Page 18

    All of the key fobs provided with your new vehicle have been programmed to the vehicle electronics. Replacement keys note: only key fobs that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a key fob is programmed to a vehicle, it cannot be programmed to ...

  • Page 19

    General information the sentry key 威 system complies with fcc rules part 15 and with rss-210 of industry canada. Operation is subject to the following conditions: • this device may not cause harmful interference. • this device must accept any interference that may be received, including interference...

  • Page 20

    Note: if the vehicle security light stays on continu- ously during vehicle operation, have the system checked by an authorized dealer. To disarm the system use the rke transmitter to unlock the door. If something has triggered the system in your absence, the horn will sound three times when you unlo...

  • Page 21

    • the illuminated entry system will not operate if the dimmer control is in the extreme left position. Remote keyless entry (rke) — if equipped the rke system allows you to lock or unlock the doors and activate the panic alarm from distances up to approximately 66 ft (20 m) using a hand-held radio t...

  • Page 22

    Remote key unlock, driver door/all doors first this feature lets you program the system to unlock either the driver’s door or all doors on the first press of the unlock button on the rke transmitter. To change the current setting, proceed as follows: • for vehicles equipped with the evic, refer to “...

  • Page 23

    Flash lamps with remote key lock this feature will cause the turn signal lights to flash when the doors are locked or unlocked with the rke transmit- ter. This feature can be turned on or turned off. To change the current setting, proceed as follows: • for vehicles equipped with the evic, refer to “...

  • Page 24

    Sound horn with remote key lock this feature will cause the horn to chirp when the doors are locked with the rke transmitter. This feature can be turned on or turned off. To change the current setting, proceed as follows: • for vehicles equipped with the evic, refer to “electronic vehicle informatio...

  • Page 25

    Using the panic alarm to turn the panic alarm feature on or off, press and hold the panic button on the rke transmitter for at least one second and release. When the panic alarm is on, the headlights and park lights will flash, the horn will pulse on and off, and the interior lights will turn on. Th...

  • Page 26

    1. With the rke transmitter buttons facing down, use a flat blade screwdriver to pry the two halves of the rke transmitter apart. Make sure not to damage the seal during removal. 2. Remove and replace the battery. Avoid touching the new battery with your fingers. Skin oils may cause battery deterior...

  • Page 27

    Remote starting system — if equipped this system uses the remote keyless entry (rke) transmitter to start the engine conve- niently from outside the vehicle while still maintaining security. The system has a range of approximately 300 ft (91 m). Note: the vehicle must be equipped with an auto- matic...

  • Page 28

    Remote start abort message on electronic vehicle information center (evic) — if equipped the following messages will display in the evic if the vehicle fails to remote start or exits remote start prema- turely: • remote start aborted - door ajar • remote start aborted - hood ajar • remote start abor...

  • Page 29

    Note: to avoid unintentional shut downs, the system will disable the one time press of the remote start button for two seconds after receiving a valid remote start request. To exit remote start mode and drive the vehicle before the end of the 15-minute cycle, press and release the unlock button on t...

  • Page 30

    Door locks manual door locks front and rear doors may be locked by moving the lock knob down or unlocked by moving the lock knob up. Front doors may be opened with the inside door handle without lifting the lock knob. Doors locked before closing will remain locked when closed. The emergency key will...

  • Page 31

    Power door locks — if equipped a power door lock switch is on each front door trim panel. Use this switch to lock or unlock the doors. If you press the power door lock switch while the key fob is in the ignition, and any front door is open, the power locks will not operate. This prevents you from ac...

  • Page 32

    • for vehicles not equipped with the evic, perform the following procedure: 1. Enter your vehicle and close all doors. 2. Fasten your seat belt. (fastening the seat belt will cancel any chiming that may confuse you during this programming procedure.) 3. Place the key fob into the ignition. 4. Within...

  • Page 33

    • for vehicles not equipped with the evic, perform the following procedure: 1. Enter your vehicle and close all doors. 2. Fasten your seat belt. (fastening the seat belt will cancel any chimes that may be confusing during this programming procedure.) 3. Insert the key fob into the ignition. 4. Withi...

  • Page 34

    To use the system, open each rear door, use a flat blade screwdriver (or emergency key) and rotate the dial to engage and disengage the child-protection locks. When the system on a door is engaged, that door can only be opened by using the outside door handle even if the inside door lock is in the u...

  • Page 35

    Windows power windows – if equipped the control on the left front door panel has up-down switches that give you fingertip control of all power windows. There is a single opening and closing switch on the front passenger door for passenger window control and on the rear doors of the crew cab models. ...

  • Page 36

    Warning! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seri- ously or fatally injured. Don’t leave the key in the ignition. A child could operate power windows, other controls, or move the vehicle. A...

  • Page 37

    Rough road conditions may trigger the auto reverse function unexpectedly during auto closure. If this happens, pull the switch lightly to the first detent and hold to close the window manually. • if the auto-up function is lost, reset the auto-up function by running the window all the way up (by hol...

  • Page 38

    Wind buffeting wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down or in partially open positions. This is a normal occurrence and can be minimized. If the buffeting occurs wit...

  • Page 39

    Warning! In an accident, you and your passengers can suffer much greater injuries if you are not properly buckled up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly. Buckl...

  • Page 40

    Warning! (continued) • be sure everyone in your vehicle is in a seat and using a seat belt properly. • wearing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body. These are the strongest parts of your body and can take the forces of an accident be...

  • Page 41

    2. The seat belt latch plate is above the back of the front seat, next to your arm in the rear seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap. 3. When the belt is long enough to fit, insert the latch...

  • Page 42

    Warning! • a belt buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal inju- ries. Always buckle your belt into the buckle nearest you. • a belt that is too loose will not protect you properly. In a sudden stop you c...

  • Page 43

    4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in an accident. War...

  • Page 44

    Warning! A frayed or torn belt could rip apart in an accident and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Seat belt assemblies must be replaced a...

  • Page 45

    2. To reattach the seat belt to the front center seat, pull the black buckle latch plate forward from the cab back panel and insert it into the black keyed buckle until there is an audible “click”. For proper seatbelt usage, refer “lap/shoulder belt operating instructions”. Warning! • if the black l...

  • Page 46

    Warning! • if the black latch and black buckle are not prop- erly connected when the seat belt is used by an occupant, the seat belt will not be able to provide proper restraint and will increase the risk of injury in an accident. • when reattaching the black latch and black buckle, ensure the seat ...

  • Page 47

    Adjustable upper shoulder belt anchorage in the front row outboard seats, the shoulder belt can be adjusted upward or downward to help position the belt away from your neck. Press the button located on the upper belt guide, and then move it up or down to the position that fits you best. As a guide, ...

  • Page 48

    Warning! • a lap belt worn too loose or too high is dangerous. • a belt worn too loose can allow you to slip down and under the belt in a collision. • a belt that is too loose or too high will apply crash forces to the abdomen, not to the stronger hip bones. In either case, the risk of internal inju...

  • Page 49

    Enhanced seat belt use reminder system (beltalert 姞) if the driver’s seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), the beltalert 威 will alert the driver to buckle the seat belt. The driver should also instruct all ot...

  • Page 50

    Seat belts and pregnant women we recommend that pregnant women use seat belts throughout their pregnancies. Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug against the hips as possible. Keep the belt low...

  • Page 51

    Mounted in the instrument panel, above the glove com- partment. The words srs airbag are embossed on the airbag covers. Note: these airbags are certified to the new federal regulations for advanced airbags. The advanced front airbags have a multistage inflator design. This allows the airbag to have ...

  • Page 52

    Airbag system components your vehicle may be equipped with the following airbag system components: • occupant restraint controller (orc) • airbag warning light • steering wheel and column • instrument panel • knee impact bolster • driver advanced front airbag • passenger advanced front airbag • fron...

  • Page 53

    Warning! (continued) • do not put anything on or around the airbag covers or attempt to open them manually. You may damage the airbags and you could be injured because the airbags may no longer be functional. The protective covers for the airbag cushions are designed to open only when the airbags ar...

  • Page 54

    Ride properly buckled up in the rear seat. Never allow children to slide the shoulder belt behind them or under their arm. If a child from 1 to 12 years old (not in a rear facing child seat) must ride in the front passenger seat, move the seat as far back as possible and use the proper child restrai...

  • Page 55

    Airbag deployment sensors and controls occupant restraint controller (orc) the orc is part of a federally regulated safety system required for this vehicle. The orc determines if deployment of the front airbags in a frontal collision is required. Based on impact sensor signals a central electronic o...

  • Page 56

    The orc contains a backup power supply system that may deploy the airbags even if the battery loses power or it becomes disconnected prior to deployment. Also, the orc turns on the airbag warning light in the instrument panel for approxi- mately four to eight seconds for a self-check when the igniti...

  • Page 57

    Instrument panel separate and fold out of the way as the airbags inflate to their full size. The airbags fully inflate in about 50 to 70 milliseconds. This is about half of the time it takes to blink your eyes. The airbags then quickly deflate while helping to restrain the driver and front passenger...

  • Page 58

    If you do have a collision which deploys the airbags, any or all of the following may occur: • the nylon airbag material may sometimes cause abra- sions and/or skin reddening to the driver and front passenger as the airbags deploy and unfold. The abrasions are similar to friction rope burns or those...

  • Page 59

    Maintaining your airbag system warning! • modifications to any part of the airbag system could cause it to fail when you need it. You could be injured if the airbag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the stee...

  • Page 60

    Airbag warning light you will want to have the airbags ready to inflate for your protection in a collision. The airbag warning light monitors the internal circuits and interconnecting wiring associated with airbag system electrical components. While the airbag system is designed to be maintenance fr...

  • Page 61

    • whether or not the driver and passenger safety belts were buckled/fastened; • how far (if at all) the driver was depressing the accelerator and/or brake pedal; and, • how fast the vehicle was traveling. These data can help provide a better understanding of the circumstances in which crashes and in...

  • Page 62

    Warning! In an accident, an unrestrained child, even a tiny baby, can become a projectile inside the vehicle. The force required to hold even an infant on your lap can become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any ch...

  • Page 63

    Children who weigh 20 to 40 lbs (9 to 18 kg) and who are older than one year. These child seats are also held in the vehicle by the lap/shoulder belt. • the belt-positioning booster seat is for children weigh- ing more than 40 lbs (18 kg), but who are still too small to fit the vehicle’s seat belts ...

  • Page 64

    Here are some tips for getting the most out of your child restraint: • before buying any restraint system, make sure that it has a label certifying that it meets all applicable safety standards. Chrysler group llc also recommends that you make sure that you can install the child restraint in the veh...

  • Page 65

    Warning! Improper installation can lead to failure of an infant or child restraint. It could come loose in an accident. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. Lower anchors and tether for children (latch)...

  • Page 66

    Because the lower anchorages are to be introduced to passenger carrying vehicles over a period of years, child restraint systems having attachments for those anchor- ages will continue to have features for installation in vehicles using the lap or lap/shoulder belt. They will also have tether straps...

  • Page 67

    We urge you to carefully follow the directions of the manufacturer when installing your child restraint. Many, but not all, restraint systems will be equipped with separate straps on each side, with each having a hook or connector, and a means for adjusting the tension in the strap. Forward-facing t...

  • Page 68

    Then allow the belt to retract into the retractor. For additional information on alr, refer to “automatic locking mode”. To install a child restraint, first, pull enough of the seat belt webbing from the retractor to route it through the belt path of the child restraint and slide the latch plate int...

  • Page 69

    Tether anchorage points at the right and center front seat (regular cab - all seats) 1. Place the child restraint on the seat and adjust the tether strap so that it will reach over the seat back under the head restraint to the tether anchor directly behind the seat. 2. Lift the cover (if so equipped...

  • Page 70

    Multiple child restraint installation sequence (crew cab — rear seats) 1. Obtain tether straps by raising the head restraints and reaching between the rear glass and rear seat. The tether strap may be retained with an elastic band. Accessibility to the tether strap is greatly improved by raising the...

  • Page 71

    Multiple child restraint crew cab 1 — inner anchor strap ring(s) 2 — snap hook 3 — tether strap 4 — passenger’s side rear child seat 5 — rear center child seat 6 — driver’s side rear child seat 70 things to know before starting your vehicle.

  • Page 72

    Children too large for booster seats children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend over the front of the seat when their back is against the seat back should use the lap/shoulder belt in a rear seat. • make sure that the child is upright ...

  • Page 73

    The engine oil installed in the engine at the factory is a high-quality energy conserving type lubricant. Oil changes should be consistent with anticipated climate conditions under which vehicle operations will occur. For the recommended viscosity and quality grades refer to “maintenance procedures”...

  • Page 74

    Exhaust gas warning! Exhaust gases can injure or kill. They contain carbon monoxide (co), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (co) follow these safety tips: do not run the engine in a closed garage or in confined ar...

  • Page 75

    Front seat belt assemblies must be replaced after a collision. Rear seat belt assemblies must be replaced after a collision if they have been damaged (i.E., bent retractor, torn webbing, etc.). If there is any question regarding belt or retractor condition, replace the belt. Airbag warning light the...

  • Page 76

    Warning! (continued) • never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from moving and inter- fering with the pedals or the ability to control the vehicle. • never put floor mats or other floor coverings on top of already inst...

  • Page 77

    Periodic safety checks you should make outside the vehicle tires examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect the tread and sidewall for cuts and cracks. Check the wheel nuts for tightness. Check the ti...

  • Page 78: Contents

    Understanding the features of your vehicle contents 䡵 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 ▫ inside day/night mirror . . . . . . . . . . . . . . . . 81 ▫ automatic dimming mirror — if equipped . . . 82 ▫ outside mirrors . . . . . . . . . . . . . . . . . . . . . . 82...

  • Page 79

    ▫ general information . . . . . . . . . . . . . . . . . . 118 䡵 voice command — if equipped . . . . . . . . . . . 118 ▫ voice command system operation . . . . . . . . 118 ▫ commands . . . . . . . . . . . . . . . . . . . . . . . . 119 ▫ voice training . . . . . . . . . . . . . . . . . . . . . . 122 䡵...

  • Page 80

    ▫ parking lights and panel lights . . . . . . . . . 142 ▫ fog lights — if equipped . . . . . . . . . . . . . . 142 ▫ interior lights . . . . . . . . . . . . . . . . . . . . . . 143 ▫ cargo light . . . . . . . . . . . . . . . . . . . . . . . . 144 ▫ lights-on reminder . . . . . . . . . . . . . . . . ...

  • Page 81

    䡵 cigar lighter and ash receiver — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 160 䡵 power inverter — if equipped . . . . . . . . . . . . 160 䡵 cupholders . . . . . . . . . . . . . . . . . . . . . . . . . . 162 ▫ front instrument panel cupholders — (40–20–40 seats) . . . . . . . ...

  • Page 82

    Mirrors inside day/night mirror headlight glare can be reduced by moving the small control lever under the mirror to the night position (lever flipped toward the rear of vehicle). The mirror should be adjusted with the lever set in the day position (lever flipped toward the windshield). The mirror s...

  • Page 83

    Automatic dimming mirror — if equipped this mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light next to the button will illuminate to indicate when the dimming feature is activated. Ca...

  • Page 84

    Warning! Vehicles and other objects seen in a passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or d...

  • Page 85

    Power mirrors — if equipped the controls for the power mirrors are located on the driver’s door trim panel. The power mirror controls consist of mirror select but- tons and a four-way mirror control switch. To adjust a mirror, press the mirror select button for the mirror that you want to adjust. Us...

  • Page 86

    Heated mirrors — if equipped these mirrors are heated to melt frost or ice. This feature is activated by pressing the rear window defroster button. Illuminated vanity mirror — if equipped illuminated vanity mirrors are located on each sun visor. To use the mirror, rotate the sun visor down and swing...

  • Page 87

    “slide-on-rod” features of sun visor — if equipped the sun visor “slide-on-rod” feature allows for addi- tional flexibility in positioning the visor to block out the sun. To use the “slide-on-rod” feature, rotate the sun visor downward and unclip it. Pull the sun visor along the “slide-on-rod” until...

  • Page 88

    Trailer towing mirrors — if equipped these mirrors are designed with an adjustable mirror head to provide a greater vision range when towing extra-wide loads. To change position inboard or out- board, the mirror head should be rotated (flipped in or out). Note: fold the trailer towing mirrors rearwa...

  • Page 89

    Uconnect™ phone — if equipped uconnect™ phone is a voice-activated, hands-free, in- vehicle communications system. Uconnect™ phone al- lows you to dial a phone number with your cellular phone using simple voice commands (e.G., “call” ѧ “mike” ѧ “work” or “dial” ѧ “248-555-1212”). Your cellular phone...

  • Page 90

    Linked (or paired) cellular phone can be used with the system at a time. The system is available in english, spanish, or french languages. Warning! Any voice commanded system should be used only in safe driving conditions following local laws and phone use. All attention should be kept on the roadwa...

  • Page 91

    Operation voice commands can be used to operate the uconnect™ phone and to navigate through the uconnect™ phone menu structure. Voice commands are required after most uconnect™ phone prompts. You will be prompted for a specific command and then guided through the available options. • prior to giving...

  • Page 92

    Cancel command at any prompt, after the beep, you can say “cancel” and you will be returned to the main menu. However, in a few instances the system will take you back to the previous menu. Pair (link) uconnect™ phone to a cellular phone to begin using your uconnect™ phone, you must pair your compat...

  • Page 93

    Phone to use if multiple cellular phones are in the vehicle at the same time. For example, if priority three and priority five phones are present in the vehicle, the uconnect™ phone will use the priority three cellular phone when you make a call. You can select to use a lower priority cellular phone...

  • Page 94

    Add names to your uconnect™ phonebook note: adding names to the uconnect™ phonebook is recommended when the vehicle is not in motion. • press the button to begin. • after the “ready” prompt and the following beep, say “phonebook new entry”. • when prompted, say the name of the new entry. Use of long...

  • Page 95

    • to call a name from downloaded (or uconnect™) phonebook, follow the procedure in “call by saying a name” section. • automatic download and update, if supported, begins as soon as the bluetooth 威 wireless phone connection is made to the uconnect™ phone, for example, after you start the vehicle. • a...

  • Page 96

    Object exchange profile (obex). Please see your phone owner’s manual for specific instructions on how to send these entries from your phone. Note: • the phone handset must support bluetooth威 obex transfers of phonebook entries to use this feature. • some phones cannot send phonebook entries if they ...

  • Page 97

    After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in the phonebook, call the number you just edited, or return to the main menu. “phonebook edit” can be used to add another phone number to a name entry that already exists in the phonebo...

  • Page 98

    Delete/erase “all” uconnect™ phonebook entries • press the button to begin. • after the “ready” prompt and the following beep, say “phonebook erase all”. • the uconnect™ phone will ask you to verify that you wish to delete all the entries from the phonebook. • after confirmation, the phonebook entri...

  • Page 99

    Phone call features the following features can be accessed through the uconnect™ phone if the feature(s) are available on your cellular service plan. For example, if your cellular service plan provides three-way calling, this feature can be accessed through the uconnect™ phone. Check with your cellu...

  • Page 100

    In progress. To go back to the first call, refer to “toggling between calls” in this section. To combine two calls, refer to “conference call” in this section. Place/retrieve a call from hold to put a call on hold, press the button until you hear a single beep. This indicates that the call is on hol...

  • Page 101

    • after the “ready” prompt and the following beep, say “redial”. • the uconnect™ phone will call the last number that was dialed from your cellular phone. Note: this may not be the last number dialed from the uconnect™ phone. Call continuation call continuation is the progression of a phone call on ...

  • Page 102

    • continue to follow the system prompts to complete the language selection. After selecting one of the languages, all prompts and voice commands will be in that language. Note: after every uconnect™ phone language change operation, only the language-specific 32-name phone- book is usable. The paired...

  • Page 103

    Warning! To use your uconnect™ phone system in an emer- gency, your cellular phone must be: • turned on, • paired to the uconnect™ system, • and have network coverage. Towing assistance if you need towing assistance: • press the button to begin. • after the “ready” prompt and the following beep, say...

  • Page 104

    Working with automated systems this method is used in instances where one generally has to press numbers on the cellular phone keypad while navigating through an automated telephone system. You can use your uconnect™ phone to access a voice mail system or an automated service, such as a paging servi...

  • Page 105

    Barge in - overriding prompts the “voice command” button can be used when you wish to skip part of a prompt and issue your voice command immediately. For example, if a prompt is asking “would you like to pair a phone, clear a...,” you could press the button and say, “pair a phone” to select that opt...

  • Page 106

    Note: certain brands of cellular phones do not send the dial ring to the uconnect™ phone to play it on the vehicle audio system, so you will not hear it. Under this situation, after successfully dialing a number the user may feel that the call did not go through even though the call is in progress. ...

  • Page 107

    Phone and the uconnect™ phone, follow the instructions described in your cellular phone user’s manual. List paired cellular phone names • press the button to begin. • after the “ready” prompt and the following beep, say “setup phone pairing”. • when prompted, say “list phones”. • the uconnect™ phone...

  • Page 108

    Delete uconnect™ phone paired cellular phones • press the button to begin. • after the “ready” prompt and the following beep, say “setup phone pairing”. • at the next prompt, say “delete” and follow the prompts. • you can also press the button at any time while the list is being played, and then cho...

  • Page 109

    Best results, the voice training session should be com- pleted when the vehicle is parked with the engine running, all windows closed, and the blower fan switched off. This procedure may be repeated with a new user. The system will adapt to the last trained voice only. Reset • press the button. • af...

  • Page 110

    • fully closed windows, • dry weather condition. • even though the system is designed for users speaking in north american english, french, and spanish ac- cents, the system may not always work for some. • when navigating through an automated system such as voice mail, or when sending a page, at the...

  • Page 111

    • fully closed windows, • dry weather conditions, and • operation from the driver’s seat. • performance, such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the uconnect™ phone. • echo at the phone far end can sometimes be reduced by lowering the in-veh...

  • Page 112

    Send messages: you can send messages using uconnect™ phone. To send a new message: • press the button. • after the “ready” prompt and the following beep, say “sms send” or “send messages.” • you can either say the message you wish to send or say “list messages.” there are 20 preset messages. To send...

  • Page 113

    16. Can this wait? 17. Bye for now 18. When can we meet 19. Send number to call 20. Start without me turn sms incoming announcement on/off turning the sms incoming announcement off will stop the system from announcing the new incoming mes- sages. • press the button. • after the “ready” prompt and th...

  • Page 114

    3 understanding the features of your vehicle 113.

  • Page 115

    114 understanding the features of your vehicle.

  • Page 116

    3 understanding the features of your vehicle 115.

  • Page 117

    Voice commands primary alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all voice commands primary alternate(s) call cancel confirmation prompts continue delete dial download edit emergency english erase all espanol francais help home 116 unders...

  • Page 118

    Voice commands primary alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous record again redial voice commands primary alternate(s) return to main menu return or main menu select phone select send set up...

  • Page 119

    General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment....

  • Page 120

    Note: if you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the voice command button, listen for the beep, and say your command. Pressing the voice command button while the system i...

  • Page 121

    Changing the volume 1. Start a dialogue by pressing the voice command button. 2. Say a command (e.G., “help”). 3. Use the on/off volume rotary knob to adjust the volume to a comfortable level while the voice command system is speaking. Please note the volume setting for voice command is different th...

  • Page 122

    • “previous station” (to select the previous station) • “radio menu” (to switch to the radio menu) • “main menu” (to switch to the main menu) satellite radio to switch to satellite radio mode, say “sat” or “satellite radio”. In this mode, you may say the following com- mands: • “channel number” (to ...

  • Page 123

    − “continue” (to continue recording) − “delete” (to delete the recording) • “play memos” (to play previously recorded memos) — during the playback you may press the voice command button to stop playing memos. You proceed by saying one of the following commands: − “repeat” (to repeat a memo) − “next”...

  • Page 124

    1. Press the voice command button, say “system setup” and once you are in that menu then say “voice training.” this will train your own voice to the system and will improve recognition. 2. Repeat the words and phrases when prompted by uconnect™ voice. For best results, the “voice training” session s...

  • Page 125

    Position, then release the handle to lock the seat into position. Using body pressure, move forward and rear- ward on the seat to be sure that the seat adjusters have latched. Warning! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose ...

  • Page 126

    Warning! • actuating the recliner handle will allow the seat- back to swing (dump) forward on manual recliner seats. Do not stand or lean in front of the seat while actuating the handle. The seatback may swing forward and hit you causing injury. This dump feature allows access to the storage bin beh...

  • Page 127

    Warning! (continued) • you can be seriously, even fatally, injured riding in a seat with the seatback reclined. Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. If you ride in this position, the shoulder harness will no longer be restraining y...

  • Page 128

    Rear head restraints the outboard head restraints can be adjusted. To raise the head restraint, pull upward on the head restraint. To lower the head restraint, press the large button, located on the base of the head restraint, and push downward on the head restraint. Note: the rear center head restr...

  • Page 129

    There are two power seat switches that are used to control the movement of the seat cushion and the seat- back. Adjusting the sear forward or rearward the seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Rele...

  • Page 130

    Reclining the seatback the angle of the seatback can be adjusted forward or rearward. Push the seatback switch forward or rearward, the seat will move in the direction of the switch. Release the switch when you have reached the desired position. Warning! • adjusting a seat while driving may be dange...

  • Page 131

    Power lumbar — if equipped vehicles equipped with power driver or passenger seats may be also be equipped with power lumbar. The power lumbar switch is located on the outboard side of the power seat. Push the switch forward to increase the lumbar support. Push the switch rearward to decrease the lum...

  • Page 132

    Warning! (continued) • do not place anything on the seat that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat. Caution! Repeated...

  • Page 133

    The heated seats switch from high to low and from low to off automatically, based on time and tempera- ture of the seat. The heated seats can operate on high heat for as little as 4 minutes and up to 30 minutes before switching to low heat. Once a seat has switched to the low heat setting it may ope...

  • Page 134

    Note: • once a heat setting is selected, heat will be felt within two to five minutes. • the engine must be running for the heated seats to operate. The heated seats switch from high to low and from low to off automatically, based on time and tempera- ture of the seat. The heated seats can operate o...

  • Page 135

    Vehicles equipped with remote start on models equipped with remote start, the drivers ventilated seat can be programmed to come on during a remote start. Refer to “remote starting system — if equipped” in “things to know before starting your vehicle” for further information. 40-20-40 front bench sea...

  • Page 136

    Keyless entry (rke) transmitters can also be pro- grammed to recall the same positions when the un- lock button is pressed. Note: the power lumbar option is not programmable with driver memory seats. Your vehicle was delivered with two rke transmitters. One or both rke transmitters can be linked to ...

  • Page 137

    Performed within 10 seconds if you desire to also use a rke transmitter to recall memory positions. 8. Turn the ignition off and remove the key. 9. Press and release the lock button on one of the rke transmitters. 10. Repeat the above steps to set the next memory position using the other numbered me...

  • Page 138

    To disable a rke transmitter linked to memory 1. Turn the ignition switch to the off position and remove the key. 2. Press and release the memory set button located on the driver’s seat. 3. Within 10 seconds, press and release the unlock button on the rke transmitter. To disable another rke transmit...

  • Page 139

    Driver easy exit and easy entry control this additional feature provides automatic driver’s seat positioning which will enhance driver mobility into and out of the vehicle. The seat cushion will move rearward approximately 2.5 in (60 mm) when the key is removed from the ignition switch. The seat wil...

  • Page 140

    2. Reach into the opening beneath the center of the hood and push the safety latch lever from right to left to release it, before raising the hood. Caution! To prevent possible damage, do not slam the hood to close it. Use a firm downward push at the front center of the hood to ensure that both latc...

  • Page 141

    Lights the headlight switch is located on the left side of the instrument panel, next to the steering wheel. The head- light switch controls the operation of the headlights, parking lights, instrument panel lights, cargo lights and fog lights (if equipped). Your vehicle is equipped with plastic head...

  • Page 142

    Headlights to turn on the headlights, rotate the headlight switch clockwise. When the headlight switch is on the parking lights, taillights, license plate light and instrument panel lights are also turned on. To turn off the headlights, rotate the headlight switch back to the o (off) position. Autom...

  • Page 143

    Headlight delay to aid in your exit, your vehicle is equipped with a headlight delay that will leave the headlights on for approximately 90 seconds. This delay is initiated when the ignition is turned off while the headlight switch is on, and then the headlight switch is cycled off. Headlight delay ...

  • Page 144

    Illuminate when the fog lights are on. The fog lights will turn off when the switch is pushed a second time, when the headlight switch is rotated to the off position, or the high beam is selected. Interior lights courtesy and dome lights are turned on when the front doors are opened, when the dimmer...

  • Page 145

    Cargo light the cargo lights are turned on by pressing on the cargo button. The cargo lights will also turn on for approximately 30 seconds when a rke transmitter unlock button is pressed, as part of the illuminated entry feature. Lights-on reminder if the headlights, parking lights, or cargo lights...

  • Page 146

    Daytime running lights — if equipped the headlights on your vehicle will illuminate when the engine is started and the transmission is in any gear except park. This provides a constant ⬙lights on⬙ condition until the ignition is turned off. The lights illuminate at less than 50% of normal intensity....

  • Page 147

    Lane change assist tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. Flash-to-pass you can signal another vehicle with your headlights by partially pulling the multifunction lever toward the steer-...

  • Page 148

    Intermittent wiper system the intermittent feature of this system was designed for use when weather conditions make a single wiping cycle, with a variable pause between cycles, desirable. For maximum delay between cycles, rotate the control knob into the upper end of the delay range. The delay inter...

  • Page 149

    To prevent freeze-up of your windshield washer system in cold weather, select a solution or mixture that meets or exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers. Warning! Sudden loss of visibility through the windshield could lead ...

  • Page 150

    Warning! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your ve- hicle. Failure to follow this war...

  • Page 151

    The adjustable pedal switch is located to the left side of the steering column. Adjustment 1. Position the driver’s seat so that you are at least 10 in (25.4 cm) away from the airbag, located in the center of the steering wheel. 2. Fasten and adjust the seatbelts. 3. Move the adjustable pedal switch...

  • Page 152

    Warning! Do not adjust the pedals while the vehicle is moving. You could lose control and have an accident. Always adjust the pedals while the vehicle is parked. Heated steering wheel — if equipped the steering wheel contains a heating element that helps warm your hands in cold weather. The heated s...

  • Page 153

    Warning! • persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, ex- haustion, or other physical conditions must exer- cise care when using the steering wheel heater. It may cause burns even at low temperature...

  • Page 154

    To activate push the on/off button (located in the end of the lever) once and the cruise indicator light (located in the mes- sage window of the cluster) will illuminate showing that the electronic speed control system is on. To turn the electronic speed control system off, push the on/off button a ...

  • Page 155

    Varying the speed setting when the electronic speed control is set, you can in- crease speed by pushing up and holding the resume accel lever. If the lever is continually held in the resume accel position, the set speed will continue to increase until the lever is released, then the new set speed wi...

  • Page 156

    Warning! Electronic speed control can be dangerous where the system cannot maintain a constant speed. Your ve- hicle could go too fast for the conditions, and you could lose control and have an accident. Do not use electronic speed control in heavy traffic or on roads that are winding, icy, snow-cov...

  • Page 157

    (rke) transmitter, if equipped. These lights are also operated individually as reading lights by pressing on the corresponding lens. Note: the courtesy/reading lights will remain on until the switch is pressed a second time, so be sure they have been turned off before leaving the vehicle. If the int...

  • Page 158

    Electrical power outlets the auxiliary 12 volt (13 amp) power outlets can provide power for in-cab accessories designed for use with the standard “cigar lighter” plug. The 12 volt power outlets have a cap attached to the outlet indicating “12v dc”, together with either a key symbol or a battery symb...

  • Page 159

    • inside the upper lid of the center storage compartment — if equipped. • rear of the center console storage compartment — crew cab. The key symbol indicates that this outlet can supply power when the key is in the on or acc positions. All accessories connected to the outlet(s) should be removed or ...

  • Page 160

    Warning! To avoid serious injury or death: • only devices designed for use in this type of outlet should be inserted into any 12 volt outlet. • do not touch with wet hands. • close the lid when not in use and while driving the vehicle. • if this outlet is mishandled, it may cause an electric shock a...

  • Page 161

    Cigar lighter and ash receiver — if equipped a removable ash receiver and cigar lighter are available. For vehicles with a bench seat the cupholder tray can be used to hold the ash receiver. For vehicles equipped with a floor console the cuphold- ers may be used. Power inverter — if equipped a 115 v...

  • Page 162

    To avoid overloading the circuit, check the power ratings on electrical devices prior to using the inverter. The power inverter switch is located on the switch bank below the climate controls. To turn on the power outlet, press the switch once. Press the switch a second time to turn the power outlet...

  • Page 163

    Warning! To avoid serious injury or death: • do not use a three-prong adapter. • do not insert any objects into the receptacles. • do not touch with wet hands. • close the lid when not in use. • if this outlet is mishandled it may cause an electric shock and failure. Cupholders front instrument pane...

  • Page 164

    Front instrument panel cupholders — floor storage bin for vehicles equipped with bucket seats two cupholders are located in the floor storage bin. Rear cupholder — crew cab crew cab vehicles are equipped with rear cupholders located in the center armrest. Cupholders crew cab rear armrest cupholder 3...

  • Page 165

    Storage glove box storage the glove box is located on the passenger side of the instrument panel and features both an upper (if equipped) and lower storage area. To open the upper glove box push upward on the handle release. The glove box door will automatically open. Glove box 1 — upper glove box (...

  • Page 166

    To open the lower glove box, pull on the handle to release the latch and lower the door. Door storage front door storage — if equipped storage areas and bottle holders (drivers side only) are located in the door trim panels. Lower glove box front door storage 3 understanding the features of your veh...

  • Page 167

    Rear door storage — crew cab storage compartments are located in both the driver and passenger door trim panels. Center storage compartment — if equipped the center storage compartment is located between the driver and passenger seats. The storage compartment provides an armrest and contains both an...

  • Page 168

    Warning! • this armrest is not a seat. Anyone seated on the armrest could be seriously injured during vehicle operation, or an accident. Only use the center seating position when the armrest is fully upright. • in an accident, the latch may open if the total weight of the items stored exceeds about ...

  • Page 169

    With the upper lid closed, pull on the lower handle to open the lower storage bin. Seatback storage located in the back of both the driver and passenger front seats are pockets that can be used for storage. Lower storage bin drivers side seatback storage 168 understanding the features of your vehicl...

  • Page 170

    Storage (regular cab) the storage bin is located behind the front seats and runs the length of the cab. Storage and seats (crew cab) the crew cab models provide additional storage under the rear seats. Lift the seats to access the storage com- partment. To open the storage compartments, lift upward ...

  • Page 171

    Caution! Always lift the storage compartment lids by using the handle. Failure to lift the lids by using the handle can result in damage to the lids. Plastic grocery bag retainers (regular cab models) retainer hooks which will hold plastic grocery bag handles are built into the back panel of the cab...

  • Page 172

    Rear window features rear window defroster the rear window defroster button is located on the climate control panel. Press this button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indicator in the button will illuminate when the rear window defroster is on. T...

  • Page 173

    Power sliding rear window — if equipped the switch for the power sliding rear window is located on the overhead console. Press the left side of the switch to open the glass and the right side of the switch to close the glass. Manual sliding rear window — if equipped a locking device in the center of...

  • Page 174: Contents

    Understanding your instrument panel contents 䡵 instrument panel features . . . . . . . . . . . . . . . 176 䡵 instrument cluster — base . . . . . . . . . . . . . . . 177 䡵 instrument cluster — premium . . . . . . . . . . . 178 䡵 instrument cluster descriptions . . . . . . . . . . . 179 䡵 electronic v...

  • Page 175

    䡵 media center 730n/430/430n (rer/rbz/ rhb) cd/dvd/hdd/nav — if equipped . . . 210 ▫ operating instructions (voice command system) — if equipped . . . . . . . . . . . . . . . . 210 ▫ operating instructions (uconnect™ phone) — if equipped . . . . . . . . . . . . . . . . . . . . . . 210 䡵 media center...

  • Page 176

    䡵 uconnect™ multimedia (satellite radio) — if equipped (ren/rer/res radios only) . . . . 240 ▫ system activation . . . . . . . . . . . . . . . . . . . . 240 ▫ electronic serial number/sirius identification number (esn/sid) . . . . . . . . . 241 ▫ selecting uconnect™ multimedia (satellite) mode . . ....

  • Page 177

    Instrument panel features 1 — headlight switch 7 — 115v power inverter outlet 13 — transfer case position switch 2 — instrument cluster 8 — power outlet 14 — ignition switch 3 — radio 9 — lower switch bank 15 — hood release 4 — upper switch bank 10 — cup holders 16 — parking brake release 5 — upper ...

  • Page 178

    Instrument cluster — base 4 understanding your instrument panel 177.

  • Page 179

    Instrument cluster — premium 178 understanding your instrument panel.

  • Page 180

    Instrument cluster descriptions 1. Tachometer the tachometer indicates engine speed in revolutions per minute. Caution! Do not operate the engine with the tachometer pointer at high rpm for extended periods. Engine damage may occur. 2. Turn signal indicators the arrow will flash with the exterior tu...

  • Page 181

    Caution! Driving with a hot engine cooling system could damage your vehicle. If temperature gauge reads “h” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “h” and you hear continuo...

  • Page 182

    If a problem is detected, the light will come on while the engine is running. Cycle the ignition key when the vehicle has completely stopped and the shift lever is placed in the park position, the light should turn off. If the light remains lit with the engine running, your vehicle will usually be d...

  • Page 183

    10. Tow/haul the tow haul button is located on the center stack switch bank. This light will illumi- nate when tow haul mode is selected 11. Vehicle security light — if equipped this light will flash at a fast rate for approxi- mately 15 seconds, when the vehicle security alarm is arming, and then w...

  • Page 184

    Service, so that you can be sure that it is properly reset, or that the door jamb sticker is accurate if the odometer must be reset at zero. The two trip odometers show individual trip mileage. To switch from odometer to trip odometers, press and release the trip odometer button. To reset a trip odo...

  • Page 185

    The trip button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the malfunction indicator light (mil). Nofuse if the vehicle diagnostic system determines that t...

  • Page 186

    Note: if the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary repeat this procedure. 15. Engine temperature warning light this light warns of an overheated engine condi- tion. As temperatures rise and the gauge ap- proaches h, this...

  • Page 187

    17. Low fuel light when the fuel level reaches approximately 3.0 gal (11.0 l) this light will turn on, and remain on until fuel is added. For vehicles equipped with a premium cluster this indi- cator will display in the electronic vehicle information center (evic). Refer to ”electronic vehicle infor...

  • Page 188

    21. Brake warning light this light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on, it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake syste...

  • Page 189

    Warning! Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. You could have an accident. Have the vehicle checked immediately. Vehicles equipped with the abs, are also equipped with electronic brake force dist...

  • Page 190

    Center (evic). Refer to ”electronic vehicle information center (evic) — if equipped” for further information. 23. Malfunction indicator light (mil) the malfunction indicator light (mil) is part of an onboard diagnostic (obdii) system which monitors the emissions and engine control sys- tem. If the v...

  • Page 191

    Warning! A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal operating conditions. This can cause a fire if you drive slowly or park over flammable substances such as dry plants or wood or cardboard, etc. This could result in death or serious injur...

  • Page 192

    27. Transmission temperature warning light this light indicates that there is excessive trans- mission fluid temperature that might occur with severe usage such as trailer towing. It may also occur when operating the vehicle in a high torque converter slip condition, such as 4-wheel-drive operation ...

  • Page 193

    Belt remains unbuckled, the seat belt reminder light will flash or remain on continuously. Refer to “occupant restraints” in “things to know before starting your vehicle” for further information. 29. Charging system light this light shows the status of the electrical charg- ing system. The light sho...

  • Page 194

    Note: the compass on your vehicle is self-calibrating, eliminating the need to manually calibrate the compass. This system conveniently allows the driver to select a variety of useful information by pressing the switches mounted on the steering wheel. The evic consists of the following: • vehicle in...

  • Page 195

    Steering wheel evic control button, as it appears on the left side of the steer- ing wheel. Press and release the up button to scroll up- ward through the main menus (dte, mi/gal, system info, messages, units, setup) and sub menus. Press and release the down button to scroll downward through the mai...

  • Page 196

    Electronic vehicle information center (evic) displays when the appropriate conditions exist, the evic displays the following messages: • left front turn signal lamp out • right front turn signal lamp out • left rear turn signal lamp out • right rear turn signal lamp out • service air filter • check ...

  • Page 197

    • turn signal on • rke battery low • low washer fluid • oil change due > dealer info • park assist on • park assist off • warning object detected • left front turn signal light out • left rear turn signal light out • right front turn signal light out • right rear turn signal light out • service park...

  • Page 198

    • memory system unavailable — seatbelt buckled • memory 1 profile recall • memory 2 profile recall • adjustable pedals unavailable — vehicle in reverse • adjustable pedals unavailable — cruise engaged • to tow vehicle safely, read neutral shift procedure in owners manual evic warning lights • door a...

  • Page 199

    • electronic speed control light this light will turn on when the electronic speed control is on. • electronic throttle control (etc) light this light informs you of a problem with the electronic throttle control (etc) system. The light will come on when the ignition is first turned on and remain on...

  • Page 200

    Shift the transmission into neutral and idle the ve- hicle. If the temperature reading does not return to normal, turn the engine off immediately and call for service. Refer to “if your engine overheats” in “what to do in emergencies” for more information. • serv 4wd the serv 4wd light monitors the ...

  • Page 201

    Scheduled oil change interval. The engine oil change indicator system is duty-cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to the on positio...

  • Page 202

    Significant amount of fuel to the vehicle will turn off the ⬙low fuel⬙ text and a new dte value will display. Evic average fuel economy shows the average fuel economy since the last reset. When the fuel economy is reset, the display will read “reset” or show dashes for two seconds. Then, the history...

  • Page 203

    To reset the display reset will only occur while a resettable function is being displayed. Press and release the odometer/trip odometer button once to clear the resettable function being displayed. Vehicle info (customer information features) press and release the up or down button until “vehicle in...

  • Page 204

    Compass / temperature display the compass readings indicate the direction the vehicle is facing. The evic will display one of eight compass readings and the outside temperature. Note: • the system will display the last known outside tem- perature when starting the vehicle and may need to be driven s...

  • Page 205

    Note: a good calibration requires a level surface and an environment free from large metallic objects such as buildings, bridges, underground cables, railroad tracks, etc. Manual compass calibration if the compass appears erratic and the cal indicator does not appear in the evic display, you must pu...

  • Page 206

    1. Turn the ignition switch on. 2. Press the up or down button until the system setup (customer-programmable features) menu is reached, then press the select button. 3. Press the down button until the “compass variance” message is displayed in the evic, then press the select button. The last varianc...

  • Page 207

    Use the up or down button to display one of the following choices. Select language when in this display you may select one of five lan- guages for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the up or down button while in this display and scr...

  • Page 208

    Feature showing the system has been activated, or the check-mark is removed showing the system has been deactivated. Remote unlock sequence when driver door 1st press is selected, only the driver’s door will unlock on the first press of the rke transmitter unlock button. When driver door 1st press i...

  • Page 209

    Horn with remote lock when this feature is selected, a short horn sound will occur when the rke transmitter lock button is pressed. This feature may be selected with or without the flash lamps with lock feature. To make your selection, press and release the select button until a check-mark ap- pears...

  • Page 210

    Key-off power delay when this feature is selected, the power window switches, radio, hands-free system (if equipped), dvd video system (if equipped), power sunroof (if equipped), and power outlets will remain active for up to 10 minutes after the ignition switch is turned off. Opening a vehicle door...

  • Page 211

    Make your selection, press and release the select button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed, showing the system has been deactivated. Remote start comfort sys. When this feature is selected and the remote start is activat...

  • Page 212

    Media center 130 (sales code res) note: the radio sales code is located on the lower right side of the radio faceplate. Operating instructions — radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume contro...

  • Page 213

    Seek buttons press and release the seek buttons to search for the next listenable station in am/fm mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations wit...

  • Page 214

    Push the rotary tune/scroll control knob a second time and mid will display. Turn the tune/scroll control knob to the right or left to increase or decrease the mid-range tones. Push the rotary tune/scroll control knob a third time and treble will display. Turn the tune/scroll control knob to the rig...

  • Page 215

    Set 2 in both am and fm. This allows a total of 12 am and 12 fm stations to be stored into pushbutton memory. The stations stored in set 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 these butt...

  • Page 216

    If you insert a disc with the ignition on and the radio on, the unit will switch from radio to cd mode and begin to play when you insert the disc. The display will show the track number, and index time in minutes and seconds. Play will begin at the start of track 1. Caution! • this cd player will ac...

  • Page 217

    The current selection. Pressing and holding the seek button will allow faster scrolling through the tracks in cd and mp3 modes. Time button press this button to change the display from a large cd playing time display to a small cd playing time display. Rw/ff press and hold the ff (fast forward) butt...

  • Page 218

    Supported medium formats (file systems) the medium formats supported by the radio are iso 9660 level 1 and level 2 and includes the joliet extension. When reading discs recorded using formats other than iso 9660 level 1 and level 2, the radio may fail to read files properly and may be unable to play...

  • Page 219

    When using the mp3 encoder to compress audio data to an mp3 file, the bit rate and sampling frequencies in the following table are supported. In addition, variable bit rates (vbr) are also supported. The majority of mp3 files use a 44.1 khz sampling rate and a 192, 160, 128, 96 or vbr bit rate. Mpeg...

  • Page 220

    To increase the speed of disc loading, it is recommended to use cd-r media and single-session discs. To create a single-session disc, enable the “disc at once” option before writing to the disc. Operation instructions - auxiliary mode the auxiliary (aux) jack is an audio input jack, which allows the...

  • Page 221

    Media center 130 with satellite radio (sales code res+rsc) note: the radio sales code is located on the lower right side of the radio faceplate. Operating instructions — radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) ...

  • Page 222

    Seek buttons press and release the seek buttons to search for the next listenable station in am/fm mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations wit...

  • Page 223

    3. After adjusting the hours, press the right side tune/ scroll control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side tune/ scroll control knob. Press the tune/scroll control knob to save time change. 5. To exit, press any button/knob or wait fi...

  • Page 224

    Push the rotary tune/scroll control knob a second time and mid will display. Turn the tune/scroll control knob to the right or left to increase or decrease the mid-range tones. Push the rotary tune/scroll control knob a third time and treble will display. Turn the tune/scroll control knob to the rig...

  • Page 225

    Program type 16-digit character display information inform jazz jazz news news nostalgia nostalga oldies oldies personality persnlty public public rhythm and blues r & b religious music rel musc religious talk rel talk rock rock soft soft soft rock soft rck soft rhythm and blues soft r&b sports spor...

  • Page 226

    Hours, press the tune/scroll control knob to set the minutes. The minutes will begin to blink. Adjust the minutes using the right side tune/scroll control knob. Press the tune/scroll control knob to save time change. Am/fm button press the button to select either am or fm mode. Set/rnd button — to s...

  • Page 227

    Operation instructions — cd mode for cd and mp3 audio play note: • the ignition switch must be in the on or acc position to operate the radio. • this radio is capable of playing compact discs (cd), recordable compact discs (cd-r), rewritable compact discs (cd-rw), compact discs with mp3 tracks and m...

  • Page 228

    Eject button - ejecting a cd press the eject button to eject the cd. If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the cd is not removed, the radio will reinsert the cd but will not play it. A disc can be ejected with the radio and ignition off. Note: ...

  • Page 229

    Press the set/rnd button a second time to stop ran- dom play. Notes on playing mp3 files the radio can play mp3 files; however, acceptable mp3 file recording media and formats are limited. When writing mp3 files, pay attention to the following restric- tions. Supported media (disc types) the mp3 fil...

  • Page 230

    Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal cd audio tracks and computer files (including mp3 files). Discs created with an option such as ⬙keep disc open after writing ⬙ are most likely multisession discs. The use of multisession for c...

  • Page 231

    Playback of mp3 files when a medium containing mp3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the mp3 files. Loading times for playback of mp3 files may be affected by the following: • med...

  • Page 232

    Press and hold the info button again for three seconds to return to ⬙elapsed time⬙ display. Operation instructions - auxiliary mode the auxiliary (aux) jack is an audio input jack which allows the user to plug in a portable device such as an mp3 player or cassette player and utilize the vehicle’s au...

  • Page 233

    Radio system in your vehicle. Sirius will supply a wel- come kit that contains general information, including how to setup your on-line listening account. For further information, call the toll-free number 888-539-7474, or visit the sirius web site at www.Sirius.Com, or at www- .Siriuscanada.Ca for ...

  • Page 234

    Reception quality satellite reception may be interrupted due to one of the following reasons: • the vehicle is parked in an underground parking structure or under a physical obstacle. • dense tree coverage may interrupt reception in the form of short audio mutes. • driving under wide bridges or alon...

  • Page 235

    Rw/ff pressing the rw (rewind) or ff (fast forward) buttons causes the tuner to search for the next channel in the direction of the arrows. Tune control (rotary) turn the rotary tune/scroll control knob clockwise to increase or counterclockwise to decrease the channel. Music type button pressing thi...

  • Page 236

    Selected within five seconds after pressing the set but- ton, the channel will continue to play but will not be stored into pushbutton memory. You may add a second channel to each pushbutton by repeating the above procedure with this exception: press the set button twice and set 2 will show in the d...

  • Page 237

    Uci supports mini, 4g, photo, nano, 5g ipod 威 and iphone 威 devices. Some ipod威 software versions may not fully support the uci features. Please visit apple’s website for software updates. Note: • if the radio has a usb port, connecting an ipod威 to this port does not play the media. For playing an ip...

  • Page 238

    • the ipod威 can be controlled using the radio buttons to play, browse, and list the ipod 威 contents. • the ipod威 battery charges when plugged into the uci connector (if supported by the specific ipod 威 device) controlling the ipod 姞 using radio buttons to get into the uci (ipod 威) mode and access a ...

  • Page 239

    Jump to the previous track in the list; pressing this button at any other time in the track, it will jump to the beginning of the track. Pressing the seek >> button during play mode, it will jump to the next track in the list. • while a track is playing, press the info button to see the associated m...

  • Page 240

    The track detail on the radio display. Once the track to be played is highlighted on the radio display, press the tune control knob to select and start playing the track. Turning the tune control knob fast will scroll through the list faster. During fast scroll, a slight delay in updating the inform...

  • Page 241

    • music type button: the music type button is another shortcut button to the genre listing on your ipod 威. Caution! • leaving the ipod威 (or any supported device) any- where in the vehicle in extreme heat or cold can alter the operation or damage the device. Follow the device manufacturer’s guideline...

  • Page 242

    Information, call the toll-free number 888-539-7474, or visit the sirius web site at www.Sirius.Com, or at www- .Siriuscanada.Ca for canadian residents. Electronic serial number/sirius identification number (esn/sid) please have the following information available when calling: 1. The electronic ser...

  • Page 243

    Bikes should be placed as far rearward as possible, within the loading design of the rack. Do not place items directly on or above the antenna. Reception quality satellite reception may be interrupted due to one of the following reasons: • the vehicle is parked in an underground parking structure or...

  • Page 244

    Info button pressing the info button will cycle the display informa- tion between artist, song title, and composer (if avail- able). Also, pressing and holding the info button for an additional three seconds will make the radio display the song title all of the time (press and hold again to return t...

  • Page 245

    Setup button pressing the setup button allows you to select the following items: • display sirius id number — press the audio/ select button to display the sirius id number. This number is used to activate, deactivate, or change the sirius subscription. Set button – to set the pushbutton memory when...

  • Page 246

    Steering wheel audio controls — if equipped the remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. The right hand control is a rocker type switch with a pushbutton in the center. Pressing the top of the switch will incre...

  • Page 247

    The button located in the center of the left hand control will tune to the next pre-set station that you have programmed in the radio pre-set pushbuttons. Cd player pressing the top of the switch once will go to the next track on the cd. Pressing the bottom of the switch once will go to the beginnin...

  • Page 248

    Note: if you experience difficulty in playing a particu- lar disc, it may be damaged (i.E., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known good disc before considering disc player service. Radio operation and cellular p...

  • Page 249

    Manual heating and air conditioning system the controls for the manual heating and air conditioning system in this vehicle consist of a series of outer rotary dials and inner push knobs. These comfort controls can be set to obtain desired interior conditions. Front blower control there are four blow...

  • Page 250

    Temperatures. Rotating the knob clockwise, into the red area, indicates warmer temperatures. Note: if your air conditioning performance seems lower than expected, check the front of the a/c con- denser (located in front of the radiator), for an accumu- lation of dirt or insects. Clean with a gentle ...

  • Page 251

    Mix mode air is directed through the floor, defrost and side window demist outlets. This setting works best in cold or snowy conditions that require extra heat at the windshield. This setting is good for maintaining comfort, while reducing moisture on the windshield. Defrost mode air is directed thr...

  • Page 252

    • in cold or damp weather, the use of the recirculation mode will cause windows to fog on the inside because of moisture buildup inside the vehicle. For maximum defogging, select the outside air position. • the a/c can be deselected manually without disturb- ing the mode control selection by pressin...

  • Page 253

    Max a/c for maximum cooling, when max a/c is selected the a/c is turned on automatically and the air is recircu- lated. Note: a/c cannot be deselected when in max a/c position. The led will blink three times if the a/c button is pushed. Automatic temperature control (atc) — if equipped • the automat...

  • Page 254

    Automatic operation 1. Position the mode control knob to the auto position on the automatic temperature control (atc) panel. 2. Position the blower control knob in the auto posi- tion on the atc panel. 3. Next, adjust the temperature you would like the system to maintain by adjusting the driver and ...

  • Page 255

    Note: • it is not necessary to move the temperature settings for cold or hot vehicles. The system automatically adjusts the temperature, mode and fan speed to provide comfort as quickly as possible. • the temperature can be displayed in u.S. Or metric units by selecting the us/m customer-programmabl...

  • Page 256

    Selected. This allows the front occupants to control the volume of air circulated in the vehicle and cancel the auto mode. The operator can also select the direction of the airflow by selecting one of the following positions. Panel mode air comes from the outlets in the instrument panel. Each of the...

  • Page 257

    The air conditioning (a/c) button allows the operator to manually activate or deactivate the air conditioning system. When in a/c mode and the atc is set to a cool temperature, dehumidified air flows through the air outlets. If economy mode is desired, press the a/c button to turn off the a/c mode i...

  • Page 258

    Glycol antifreeze coolant and 50% water is recommended. Refer to “maintenance procedures” in “maintaining your vehicle” for proper coolant selection. Winter operation to ensure the best possible heater and defroster perfor- mance, make sure the engine cooling system is function- ing properly and the...

  • Page 259

    Operating tips 258 understanding your instrument panel.

  • Page 260: Starting And Operating

    Starting and operating contents 䡵 starting procedures . . . . . . . . . . . . . . . . . . . . 263 ▫ normal starting . . . . . . . . . . . . . . . . . . . . . 263 ▫ automatic transmission . . . . . . . . . . . . . . . 263 ▫ if engine fails to start . . . . . . . . . . . . . . . . 264 ▫ after starting...

  • Page 261

    ▫ electronically shifted transfer case (four-position switch) – if equipped . . . . . . . 278 ▫ shifting procedure . . . . . . . . . . . . . . . . . . . 282 䡵 limited-slip differential . . . . . . . . . . . . . . . . . 284 䡵 driving on slippery surfaces . . . . . . . . . . . . . 285 䡵 driving throug...

  • Page 262

    ▫ replacement tires . . . . . . . . . . . . . . . . . . . . 311 䡵 supplemental tire pressure information — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 313 䡵 tire chains . . . . . . . . . . . . . . . . . . . . . . . . . . 313 䡵 snow tires . . . . . . . . . . . . . . . . . . . . . ...

  • Page 263

    ▫ towing tips . . . . . . . . . . . . . . . . . . . . . . . . 339 䡵 snowplow . . . . . . . . . . . . . . . . . . . . . . . . . . 340 ▫ before plowing . . . . . . . . . . . . . . . . . . . . . . 341 ▫ snowplow prep package model availability . . . . . . . . . . . . . . . . . . . . . . . . . 341 ▫ ove...

  • Page 264

    Starting procedures before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belt. The starter should not be operated for more than 15- second intervals. Waiting a few seconds between such intervals will protect the starter from overheating. Warnin...

  • Page 265

    If engine fails to start if the engine fails to start after you have followed the “normal starting” procedure, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there while cranking the engine. This should clear any excess fuel in case the engine is flooded. Caution!...

  • Page 266

    If the engine has been flooded, it may start to run, but not have enough power to continue running when the key fob is released. If this occurs, continue cranking with the accelerator pedal pushed all the way to the floor. Release the accelerator pedal and the key fob once the engine is running smoo...

  • Page 267

    Automatic transmission caution! Damage to the transmission may occur if the follow- ing precautions are not observed: • shift into park only after the vehicle has come to a complete stop. • shift into or out of reverse only after the vehicle has come to a complete stop and the engine is at idle spee...

  • Page 268

    Warning! (continued) • unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should always shift the transmission into park, remove the key fob from the ignition, a...

  • Page 269

    3. Firmly set the parking brake. 4. Press and maintain firm pressure on the brake pedal. 5. Using the screwdriver or other suitable tool, press and hold the override tab through the access port (ringed circle) on the bottom of the steering column. 6. Move the shift lever into the neutral position. 7...

  • Page 270

    Column shift lever down (-) or up (+) to select the desired top gear. For example, if the driver shifts the transmission into 3 (third gear), the transmission will never shift above third gear, but can shift down to 2 (second gear) or 1 (first gear), when needed. On vehicles equipped with 5.7l engin...

  • Page 271

    The transmission and display 5 (ers 5 is the same as normal fourth gear). Another tap down (-) will shift the transmission down to ers 4 (direct gear). To exit ers mode, press and hold the top of the switch/ shift lever in the (+) direction until “d” is once again highlighted in the instrument clust...

  • Page 272

    Warning! • never use the park position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • your vehicle could move and injure you and others if it is not completely in park. Check by trying to move...

  • Page 273

    Overdrive operation the overdrive automatic transmission contains an elec- tronically controlled fourth and fifth gear (overdrive). The transmission will automatically shift from drive to overdrive if the following conditions are present: • the shift lever is in drive; • the engine coolant (antifree...

  • Page 274

    Performance and reduce the potential for transmission overheating or failure due to excessive shifting. When operating in the “tow/haul” mode, fifth gear is disabled and 2-3 and 3-4 shift patterns are modified. Shifts into overdrive (normal fourth gear) are allowed during steady cruise (for improved...

  • Page 275

    The upper gears. When the vehicle speed drops or during acceleration when the transmission downshifts to second gear, the clutch automatically disengages. Note: • the torque converter clutch will not engage until the transmission fluid and engine coolant (antifreeze) are warm [usually after 1 to 3 m...

  • Page 276

    • four-wheel drive low range (4l) this transfer case is intended to be driven in the 2h position for normal street and highway conditions such as dry, hard surfaced roads. When additional traction is required, the 4h and 4l positions can be used to lock the front and rear drive- shafts together and ...

  • Page 277

    Because four-wheel drive provides improved traction, there is a tendency to exceed safe turning and stopping speeds. Do not go faster than road conditions permit. Note: delayed shifts out of four-wheel drive may be experienced due to uneven tire wear, low or uneven tire pressures, excessive vehicle ...

  • Page 278

    4l four-wheel drive low range - this range locks the front and rear driveshafts together forcing the front and rear wheels to rotate at the same speed. Additional traction and maximum pulling power for loose, slippery road surfaces only. Do not exceed 25 mph (40 km/h). Shifting procedure – manually ...

  • Page 279

    Method is with the vehicle rolling 2 to 3 mph (3 to 5 km/h). Avoid attempting to engage or disengage 4l with the vehicle moving faster than 2 to 3 mph (3 to 5 km/h). • do not attempt to shift into or from 4l while the transmission is in gear. Transfer case position indicator light the “transfer case...

  • Page 280

    • neutral (neutral) this electronically shifted transfer case is designed to be driven in the two-wheel drive position (2wd) for normal street and highway conditions on dry, hard surfaced roads. When additional traction is required, the transfer case 4wd lock and 4wd low positions can be used to loc...

  • Page 281

    If one or more shift conditions are not met: 1. The indicator light for the current position will remain on. 2. The newly selected position indicator light will con- tinue to flash. 3. The transfer case will not shift. Note: before retrying a selection, make certain that all the necessary requiremen...

  • Page 282

    Proper operation of four-wheel drive vehicles depends on tires of equal size, type and circumference on each wheel. Any difference in tire size can cause damage to the transfer case. Because four-wheel drive provides improved traction, there is a tendency to exceed safe turning and stopping speeds. ...

  • Page 283

    N neutral - this range disengages both the front and rear driveshafts from the powertrain. To be used for flat towing behind another vehicle. Refer to “recreational towing” in starting and operating” for further information. Shifting procedure note: • if any of the requirements to select a new trans...

  • Page 284

    Note: the four-wheel drive system will not allow shifts between 2wd/4wd lock if the front and/or rear wheels are spinning (no traction). In this situation, the selected position indicator light will flash and the origi- nal position indicator light will remain on. At this time, reduce speed and stop...

  • Page 285

    Note: • if steps 1 or 2 of either the preferred or alternate procedure are not satisfied prior to attempting the shift, then the desired position indicator light will flash continuously while the original position indicator light is on, until all requirements have been met. • the ignition switch mus...

  • Page 286

    Care should be taken to avoid sudden accelerations when both rear wheels are on a slippery surface. This could cause both rear wheels to spin, and allow the vehicle to slide sideways on the crowned surface of a road or in a turn. Driving on slippery surfaces when driving on wet or slushy roads, it i...

  • Page 287

    Flowing/rising water warning! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off). Flow- ing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water. Furthermore, flowing and/or rising water can carry your vehicl...

  • Page 288

    Caution! (continued) • driving through standing water may cause dam- age to your vehicle’s drivetrain components. Al- ways inspect your vehicle’s fluids (i.E., engine oil, transmission, axle, etc.) for signs of contamination (i.E., fluid that is milky or foamy in appearance) after driving through st...

  • Page 289

    Power steering the standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible t...

  • Page 290

    Power steering fluid check checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated. Coordinate inspection efforts through an aut...

  • Page 291

    The foot operated parking brake is located below the lower left corner of the instrument panel. To apply the park brake, firmly push the park brake pedal fully. To release the parking brake, pull the parking brake release handle. When the parking brake is applied with the ignition switch on, the “br...

  • Page 292

    The parking brake should always be applied whenever the driver is not in the vehicle. Warning! • never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. • do not leave the key fob...

  • Page 293

    Brake system if power assist is lost for any reason (for example, repeated brake applications with the engine off), the brakes will still function. However, you will experience a substantial increase in braking effort to stop the vehicle. If either the front or rear hydraulic system loses normal bra...

  • Page 294

    With a separate computer to modulate hydraulic pressure to prevent wheel lockup and help avoid skidding on slippery surfaces. The system’s pump motor runs during an abs stop to provide regulated hydraulic pressure. The pump motor makes a low humming noise during operation. This is normal. The abs co...

  • Page 295

    Warning! (continued) • the anti-lock brake system (abs) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • the abs cannot prevent a...

  • Page 296

    Note: • p (passenger) - metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designa- tion. Example: p215/65r15 95h. • european-metric tire sizing is based on european design standards. Tires designed to this standard ha...

  • Page 297

    Tire sizing chart example: size designation: p = passenger car tire size based on u.S. Design standards ⴖ....Blank....ⴖ = passenger car tire based on european design standards lt = light truck tire based on u.S. Design standards t = temporary spare tire 31 = overall diameter in inches (in) 215 = sec...

  • Page 298

    Example: service description: 95 = load index — a numerical code associated with the maximum load a tire can carry h = speed symbol — a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — the maximum speed corres...

  • Page 299

    Tire identification number (tin) the tin may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full tin, including the date code, located on the white sidewall side of the tire. Look for the tin on the outboard side of...

  • Page 300

    Tire terminology and definitions term definition b-pillar the vehicle b-pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold tire pressure cold tire inflation pressure is defined as the tire pressure after ...

  • Page 301

    Tire loading and tire pressure tire placard location note: the proper cold tire inflation pressure is listed on the driver’s side b-pillar. Tire and loading information placard tire placard location tire and loading information placard 300 starting and operating.

  • Page 302

    This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pressures for the front, rear, and spare tires. Loading the vehicle maximum load on the ...

  • Page 303

    2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and pas- sengers from xxx lbs or xxx kg. 4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if “xxx” amou...

  • Page 304

    5 starting and operating 303.

  • Page 305

    Warning! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. Tires — general information tire pressure proper tire inflation pressur...

  • Page 306

    Warning! (continued) • always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tir...

  • Page 307

    Inflation pressures specified on the placard are always “cold tire inflation pressure.” cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after a three hour period. The cold tire inflation ...

  • Page 308

    4500/5500 tire inflation 5 starting and operating 307.

  • Page 309

    When adjusting inflation pressure to a tire and wheel assembly mounted on a vehicle, use a remote mount automatic inflation kit or see your authorized dealer. Note: never attempt to re-inflate a tire and wheel assembly which has been run flat or is extremely under- inflated without first removing th...

  • Page 310

    Radial ply tires warning! Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle poorly. The instability could cause an accident result- ing in serious injury or death. Always use radial ply tires in sets of four (or six, in case of trucks with dual re...

  • Page 311

    Tread wear indicators tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is wo...

  • Page 312

    Warning! Tires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have an accident resulting in serious injury or death. Keep dismounted tires in a cool, dry place with as ...

  • Page 313

    Warning! • do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can caus...

  • Page 314

    Supplemental tire pressure information — if equipped a light load vehicle condition is defined as two passen- gers [150 lbs (68 kg) each] plus 200 lbs (91 kg) of cargo. Cold tire inflation pressures for a lightly loaded vehicle will be found on the face of the driver’s door. Tire chains use “class u...

  • Page 315

    Caution! (continued) • observe the tire chain manufacturer’s instructions on method of installation, operating speed, and conditions for usage. Always use the lower sug- gested operating speed of the chain manufacturer if different than the speed recommended by the manufacturer. These cautions apply...

  • Page 316

    Snow tires snow tires should be of the same size and type construc- tion as the front tires. Consult the manufacturer of the snow tire to determine any maximum vehicle speed requirement associated with the tire. These tires should always be operated at the vehicle maximum capacity inflation pressure...

  • Page 317

    Refer to “maintenance schedule” for the proper mainte- nance intervals. More frequent rotation is permissible if desired. The reasons for any rapid or unusual wear should be corrected prior to rotation being performed. Note: on canadian vehicles only, if your vehicle is equipped with all-season type...

  • Page 318

    To check if tires are even, lay a straight edge across all four tires. The straight edge should touch all the tires. Caution! 4500/5500 dual rear tires have only one approved direction of rotation. This is to accommodate the asymmetrical design (tread pattern) of the on/off road tire. • when replaci...

  • Page 319

    Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the world- wide fuel charter, wwfc) to define fuel properties necessary to deliver enhanced emissions, performance and durability for your vehicle. We recommend the use of gasolines that meet the wwfc s...

  • Page 320

    E-85 usage in non-flex fuel vehicles non-ffv vehicles are compatible with gasoline contain- ing 10% ethanol (e10). Gasoline with higher ethanol content may void the vehicle’s warranty. If a non-ffv vehicle is inadvertently fueled with e-85 fuel, the engine will have some or all of these symptoms: • ...

  • Page 321

    Allowed in the united states. Mmt is prohibited in federal and california reformulated gasoline. Materials added to fuel all gasolines sold in the united states are required to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal condition...

  • Page 322

    Caution! (continued) • the use of fuel additives which are now being sold as octane enhancers is not recommended. Many of these products contain high concentra- tions of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the responsi...

  • Page 323

    Warning! (continued) • guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnor- mal conditions repaired promptly. Until repaired, drive with all side windows fully open. Adding fuel the fuel tank filler tube has a rest...

  • Page 324

    Warning! • never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is being filled. • never add fuel to the vehicle when the engine is running. This is in violation of most state and federal fire regulations and may cause the mil to turn on. Note: tighten ...

  • Page 325

    Vehicle loading certification label as required by national highway traffic safety admin- istration regulations, your vehicle has a certification label affixed to the driver’s side door or pillar. This label contains the month and year of manufacture, gross vehicle weight rating (gvwr), gross axle w...

  • Page 326

    Tire size the tire size on the label represents the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size. Rim size this is the rim size that is appropriate for the tire size listed. Inflation pressure this is the cold tire inflation pressure for yo...

  • Page 327

    Improper weight distributions can have an adverse effect on the way your vehicle steers and handles and the way the brakes operate. Caution! Do not load your vehicle any heavier than the gvwr or the maximum front and rear gawr. If you do, parts on your vehicle can break, or it can change the way you...

  • Page 328

    The recommended way to measure gtw is to put your fully loaded trailer on a vehicle scale. The entire weight of the trailer must be supported by the scale. Gross combination weight rating (gcwr) the gcwr is the total permissible weight of your vehicle and trailer when weighed in combination. Note: t...

  • Page 329

    That typically provides adjustable friction associated with the telescoping motion to dampen any unwanted trailer swaying motions while traveling. Weight-carrying hitch a weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connec...

  • Page 330

    Fifth-wheel hitch the fifth-wheel hitch is a special high platform with a coupling that mounts over the rear axle of the tow vehicle in the truck bed. It connects a vehicle and fifth-wheel trailer with a coupling king pin. Gooseneck hitch the gooseneck hitch employs a pivoted coupling arm which atta...

  • Page 331

    All trailer hitches should be professionally installed on your vehicle. Trailer towing weights (maximum trailer weight ratings) note: for additional trailer towing information (maxi- mum trailer weight ratings) refer to the following website addresses: • http:// www.Dodge.Com/bodybuilder. • http:// ...

  • Page 332

    Consider the following items when computing the weight on the rear axle of the vehicle: • the tongue weight of the trailer • the weight of any other type of cargo or equipment put in or on your vehicle • the weight of the driver and all passengers. Note: remember that everything put into or on the t...

  • Page 333

    Warning! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: • make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur th...

  • Page 334

    Warning! (continued) 2. Gtw 3. Gawr 4. Trailer tongue weight rating for the trailer hitch utilized (this requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight). Towing requirements – tires • do not attempt to tow a trailer w...

  • Page 335

    • an electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required. • trailer brakes are recommended for trailers over...

  • Page 336

    Note: this module has been designed and verified for electric trailer brakes. To determine the type of brakes on your trailer, check with your trailer manufacturer or dealer. The user interface consists of the following: gain/ brake output power display shows the current gain setting. This display m...

  • Page 337

    Lever is activated while the brake is also applied, the greater of the two inputs determines the power sent to the trailer brakes. The trailer and the vehicle’s brake lamps will come on when either vehicle braking or manual trailer brakes are applied. Trailer brake status indicator light this light ...

  • Page 338

    1. Make sure the trailer brakes are in good working condition, functioning normally, and properly adjusted. See your trailer dealer if necessary. 2. Hook up the trailer and make the electrical connec- tions according to the trailer manufacturer’s instructions. 3. When a trailer with electric brakes ...

  • Page 339

    Caution! The itbm module has been designed and verified for electric trailer brakes. Connecting a trailer that is not compatible with the itbm system may result in reduced or complete loss of trailer braking. There may be a increase in stopping distance or trailer instability which could result in d...

  • Page 340

    Warning! Any work done to the vehicle’s electrical system or wiring should be performed by a qualified automo- tive technician. If done improperly it may cause damage to the electrical system wiring and could result in serious or fatal injury. Towing tips before setting out on a trip, practice turni...

  • Page 341

    Electronic speed control – if equipped − do not use in hilly terrain or with heavy loads. − when using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed. − use speed control in flat terrain and with light loads to maxim...

  • Page 342

    Warning! Attaching a snowplow to this vehicle could adversely affect performance of the airbag system in an acci- dent. Do not expect that the airbag will perform as described earlier in this manual caution! The “lamp out” indicator could illuminate if exte- rior lamps are not properly installed. Be...

  • Page 343

    The loaded vehicle weight, including the snowplow system, all aftermarket accessories, driver, passengers, options, and cargo, must not exceed either the gross vehicle weight (gvwr) or gross axle weight (gawr) ratings. These weights are specified on the safety com- pliance certification label on the...

  • Page 344

    Note: during snowplow usage on vehicles equipped with outside temperature display, the display may show higher temperatures than the outside ambient tempera- ture. The higher displayed temperature is due to blocked or reduced airflow to the underhood ambient tempera- ture sensor caused by the snowpl...

  • Page 345

    Recreational towing (behind motorhome, etc.) towing this vehicle behind another vehicle towing condition wheels off the ground two-wheel drive models four-wheel drive models flat tow none not allowed see instructions • automatic transmission in park • manual transmission in gear (not in neutral (n) ...

  • Page 346

    Recreational towing – two-wheel drive models do not flat tow this vehicle. Damage to the drivetrain will result. Recreational towing (for two-wheel drive models) is allowed only if the rear wheels are off the ground. This may be accomplished using a tow dolly or vehicle trailer. If using a tow dolly...

  • Page 347

    Caution! • front or rear wheel lifts should not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when recreational towing. • tow only in the forward direction. Towing this vehicle backwards can cause severe damage to the transfer case. • ...

  • Page 348

    Warning! You or others could be injured if you leave the vehicle unattended with the transfer case in the neutral (n) position without first fully engaging the parking brake. The transfer case neutral (n) position disengages both the front and rear driveshafts from the powertrain and will allow the ...

  • Page 349

    12. Shift the transmission into park or place manual transmission in gear (not in neutral). Caution! Damage to the transmission may occur if the trans- mission is shifted into park with the transfer case in neutral (n) and the engine running. With the trans- fer case in neutral (n) ensure that the e...

  • Page 350

    7. Shift the automatic transmission into park, or place manual transmission in neutral. 8. Release the brake pedal. 9. Disconnect vehicle from the tow vehicle. 10. Start the engine. 11. Press and hold the brake pedal. 12. Release the parking brake. 13. Shift the transmission into gear, release the b...

  • Page 351

    1. Bring the vehicle to a complete stop. Shift automatic transmission into park. 2. Turn off the engine. 3. Turn the ignition switch to the on/run position, but do not start the engine. 4. Press and hold the brake pedal. 5. Shift the automatic transmission into neutral or press the clutch pedal on a...

  • Page 352

    Caution! Damage to the transmission may occur if the trans- mission is shifted into park with the transfer case in neutral and the engine running. With the transfer case in neutral, ensure that the engine is off prior to shifting the transmission into park. 15. Remove the key fob from the ignition s...

  • Page 353

    Shifting out of neutral – electronic shift transfer case (if equipped) use the following procedure to prepare your vehicle for normal usage: 1. Bring the vehicle to a complete stop, leaving it con- nected to the tow vehicle. 2. Firmly apply the parking brake. 3. Insert the key fob into the ignition ...

  • Page 354

    15. Shift the transmission into gear, release the brake pedal (and clutch pedal on manual transmissions), and check that the vehicle operates normally. Note: • steps 1 through 5 are requirements that must be met prior to pressing the transfer case neutral button and must continue to be met until the...

  • Page 356: Contents

    What to do in emergencies contents 䡵 hazard warning flasher . . . . . . . . . . . . . . . . 356 䡵 jacking and tire changing . . . . . . . . . . . . . . . 356 ▫ 3500 models — if equipped . . . . . . . . . . . . . 357 ▫ preparations for jacking . . . . . . . . . . . . . . . 358 ▫ jacking instructions ...

  • Page 357

    Hazard warning flasher the hazard warning flasher switch is located on the upper switch bank just below the radio. Press the switch to turn on the hazard warning flasher. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. Press ...

  • Page 358

    3500 models — if equipped the jack and jack tools are stored under the front passenger seat. Lift the flap on the side of the seat for access. Remove the jack and tools by removing the wing bolt and sliding the assembly from under the seat. Warning! After using the jack and tools, always reinstall t...

  • Page 359

    Preparations for jacking 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. Warning! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel...

  • Page 360

    Warning! (continued) • always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • turn on the hazard warning flasher. • block the wheel diagonally opposite the wheel to be raised. • set the parking brake firmly and set an automatic transmission...

  • Page 361

    3. When changing the front wheel, assemble the jack drive tube to the jack and connect the drive tube to the extension tube. Place the jack under the axle as close to the tire as possible with the drive tubes extending to the front. Connect the jack tube extension and wheel wrench. When changing a r...

  • Page 362

    Before raising the wheel off the ground, make sure that the jack will not damage surrounding truck parts and adjust the jack position as required. Note: if the jack will not lower by turning the dial (thumbwheel) by hand, it may be necessary to use the jack drive tube in order to lower the jack. 4. ...

  • Page 363

    7. Install wheel center cap (if equipped) and remove wheel blocks. Do not install chrome or aluminum wheel center caps on the spare wheel. This may result in cap damage. 8. Lower the jack to its fully closed position. If the jack will not lower by turning the dial (thumbwheel) by hand, it may be nec...

  • Page 364

    Caution! • use a back and forth motion to remove the hub cap. Do not use a twisting motion when removing the hub cap, damage to the hub cap; finish may occur. • the rear hub caps on the dual rear wheel has two pry off notches. Make sure that the hook of the jack handle driver is located squarely in ...

  • Page 365

    Slots in the wheels will assist in properly orienting the inner and outer wheels. Align these slots when assem- bling the wheels for best access to the tire valve on the inner wheel. The tires of both dual wheels must be completely off the ground when tightening to insure wheel centering and maximum...

  • Page 366

    1. Tighten the wheel nuts in the numbered sequence to a snug fit. 2. Retighten the wheel nuts in the same sequence to the torques listed in the table. Go through the sequence a second time to verify that specific torque has been achieved. Retighten to specifications at 100 miles (160 km) and after 5...

  • Page 367

    Disc wheels type nut stud size torque ft lbs torque newton meters cone 9/16-18 120-150 160-200 flanged 9/16-18 130-160 190-220 to stow the flat or spare — if equipped refer to upfitters body builders guide for information on stowing your spare tire (if equipped). Hoisting a conventional floor jack m...

  • Page 368

    Caution! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 volts or damage to the battery, starter motor, alternator or electrical system may occur. Warning! Do not attempt jump-starting if the battery is frozen. It could rupture or explode ...

  • Page 369

    Warning! • take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be s...

  • Page 370

    Caution! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. 1. Connect the positive (+) end of the jumper cable to the positive (+) post of the discharged vehicle. 2. Connect the opposite end of the positive (+) jumper c...

  • Page 371

    8. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery. 9. Disconnect the positive (+) end of the jumper cable from the positive (+) post of the discharged vehicle. If frequent jump-starting is required to start your vehicle you should have ...

  • Page 372

    Caution! (continued) • when “rocking” a stuck vehicle by moving be- tween 1st and reverse, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. • revving the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage t...

  • Page 373

    Warning! • chains are not recommended for freeing a stuck vehicle. Chains may break, causing serious injury or death. • stand clear of vehicles when pulling with tow hooks. Tow straps and chains may break, causing serious injury. Caution! Tow hooks are for emergency use only to rescue a vehicle stra...

  • Page 374

    Note: the transfer case must be in the neutral position, and the transmission must be in park (auto- matic transmission), or in gear (manual transmission) to tow a four-wheel drive vehicle, unless all its wheels are off the ground. The manufacturer recommends towing with all wheels off the ground. A...

  • Page 376: Maintaining Your Vehicle

    Maintaining your vehicle contents 䡵 engine compartment — 5.7l . . . . . . . . . . . . . 377 䡵 onboard diagnostic system (obd ii) . . . . . . . 378 ▫ loose fuel filler cap message . . . . . . . . . . . 378 䡵 emissions inspection and maintenance programs . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 377

    ▫ exhaust system . . . . . . . . . . . . . . . . . . . . . 390 ▫ cooling system . . . . . . . . . . . . . . . . . . . . . 392 ▫ brake system . . . . . . . . . . . . . . . . . . . . . . . 398 ▫ rear axle and 4x4 front driving axle fluid level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 378

    Engine compartment — 5.7l 1 — air cleaner filter 7 — washer fluid reservoir 2 — automatic transmission dipstick 8 — integrated power module 3 — engine oil fill 9 — power steering fluid reservoir 4 — engine oil dipstick 10 — coolant pressure cap 5 — brake fluid reservoir 11 — engine coolant reservoir...

  • Page 379

    Onboard diagnostic system (obd ii) your vehicle is equipped with a sophisticated onboard diagnostic system called obd ii. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide ex...

  • Page 380

    The select button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the malfunction indicator light (mil). Emissions inspection and maintenance programs in some l...

  • Page 381

    4. Approximately 15 seconds later, one of two things will happen: a. The mil will flash for about 10 seconds and then return to being fully illuminated until you turn off the ignition or start the engine. This means that your vehicle’s obd ii system is not ready and you should not proceed to the i/m...

  • Page 382

    Your vehicle. Refer to these service manuals before attempting any procedure yourself. Note: intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you. Warning! You can be badly injured working on or around a motor vehi...

  • Page 383

    Caution! (continued) • your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or ...

  • Page 384

    Note: under no circumstances should oil change intervals exceed 8,000 miles (13 000 km) or six months, whichever occurs first. Engine oil selection for best performance and maximum protection under all types of operating conditions, the manufacturer only recommends engine oils that are api certified...

  • Page 385

    Synthetic engine oils you may use synthetic engine oils if the recommended oil quality requirements are met and the recommended maintenance intervals for oil and filter changes are followed. Materials added to engine oil the manufacturer strongly recommends against the addi- tion of any additives (o...

  • Page 386

    Warning! The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine comp...

  • Page 387

    Warning! (continued) • battery gas is flammable and explosive. Keep flame or sparks away from the battery. Do not use a booster battery or any other booster source with an output greater than 12 volts. Do not allow cable clamps to touch each other. • battery posts, terminals, and related accessories...

  • Page 388

    Air conditioner maintenance for best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at thi...

  • Page 389

    Note: use only manufacturer approved a/c system sealers, stop leak products, seal conditioners, compres- sor oil, or refrigerants. Refrigerant recovery and recycling r-134a air conditioning refrigerant is a hydrofluoro- carbon (hfc) that is endorsed by the environmental protection agency (epa) and i...

  • Page 390

    Amount of a high quality lubricant such as mopar 威 lock cylinder lubricant or equivalent directly into the lock cylinder. Windshield wiper blades clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild nonabrasive cleaner. This will remove ac...

  • Page 391

    The washer fluid reservoir will hold a full gallon of fluid when the low washer fluid light illuminates. Warning! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. After the engi...

  • Page 392

    Warning! • exhaust gases can injure or kill. They contain carbon monoxide (co), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing co, refer to “safety tips/exhaust gas” in “things to know before starting your vehicle” for further...

  • Page 393

    Under normal operating conditions, the catalytic con- verter will not require maintenance. However, it is impor- tant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage. Note: intentional tampering with emissions control systems can result in c...

  • Page 394

    Engine coolant checks check the engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather, where applicable). If the engine coolant (antifreeze) is dirty or rusty in appearance, the system should be drained, flushed and refilled with fresh coolant. Check the front ...

  • Page 395

    Caution! • mixing of engine coolant (antifreeze) other than specified hoat engine coolant (antifreeze), may result in engine damage and may decrease corro- sion protection. If a non-hoat engine coolant (antifreeze) is introduced into the cooling system in an emergency, it should be replaced with the...

  • Page 396

    • mix a minimum solution of 50% hoat engine coolant and distilled water. Use higher concentrations (not to exceed 70%) if temperatures below ⫺34°f (⫺37°c) are anticipated. • use only high purity water such as distilled or deion- ized water when mixing the water/engine coolant (antifreeze) solution. ...

  • Page 397

    Warning! (continued) • do not use a pressure cap other than the one specified for your vehicle. Personal injury or en- gine damage may result. Disposal of used coolant used ethylene glycol-based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local aut...

  • Page 398

    Normally a result of moisture from rain, snow, or high humidity accumulating on the radiator and being vapor- ized when the thermostat opens, allowing hot coolant to enter the radiator. If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safel...

  • Page 399

    Brake system in order to assure brake system performance, all brake system components should be inspected periodically. Refer to “maintenance schedule” for the proper mainte- nance intervals. Warning! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot restin...

  • Page 400

    Warning! • use only manufacturer’s recommended brake fluid. Refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid ...

  • Page 401

    Warning! (continued) • do not allow petroleum based fluid to contami- nate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in an accident. Rear axle and 4x4 front driving axle fluid level for models with 9.25 in front axles and 11...

  • Page 402

    Lubricant selection refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicle” for further information. Note: the presence of water in the gear lubricant will result in corrosion and possible failure of differential components. Operation of the vehicle in water, as may be encount...

  • Page 403

    Automatic transmission selection of lubricant it is important that the proper lubricant is used in the transmission to assure optimum transmission perfor- mance. Use only the manufacturer’s recommended trans- mission fluid. Refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicl...

  • Page 404

    Transmission with an improper fluid level will greatly reduce the life of the transmission and of the fluid. Check the fluid level whenever the vehicle is serviced. Fluid level check – 545rfe check the fluid level while the transmission is at normal operating temperature 82°c (180°f). This occurs af...

  • Page 405

    Room temperature, it should be between the “hot” (upper) reference holes when the transmission reaches 180°f (82°c). Remember it is best to check the level at the normal operating temperature. Caution! Be aware that if the fluid temperature is below 50°f (10°c) it may not register on the dipstick. D...

  • Page 406

    Appearance care and protection from corrosion protection of body and paint from corrosion vehicle body care requirements vary according to geo- graphic locations and usage. Chemicals that make roads passable in snow and ice, and those that are sprayed on trees and road surfaces during other seasons,...

  • Page 407

    • use a high quality cleaner wax, such as mopar威 cleaner wax or equivalent to remove road film, stains and to protect your paint finish. Take care never to scratch the paint. • avoid using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish. Caution! • do no...

  • Page 408

    • if you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well packaged and sealed. • if a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • use mopar威 touch up paint or equivalent on scratches as soon as...

  • Page 409

    • for grease stains, apply mopar威 multi-purpose cleaner or equivalent to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap residue. • do not use any harsh solvents or any other form of protectants on stain repel products. Interior care use mopar 威 total clean or equivalent...

  • Page 410

    Plastic is not as scratch resistant as glass and therefore different lens cleaning procedures must be followed. To minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. To remove road dirt, wash with a mild soap solution fol- lowed by rinsing. Do...

  • Page 411

    If the belts need cleaning, use a mild soap solution or lukewarm water. Do not remove the belts from the car to wash them. Replace the belts if they appear frayed or worn or if the buckles do not work properly. Dry with a soft tissue. Fuses totally integrated power module the totally integrated powe...

  • Page 412

    Cavity cartridge fuse mini fuse description j03 25 amp natural bat – passenger door node j04 40 amp green bat – abs pump j05 30 amp pink bat – abs valve j06 30 amp pink bat – h/lamp wash/ mtv/cm2200/elec vac pump j07 25 amp natural bat – driver door node j08 30 amp pink bat – dtcm/axle locks j09 30 ...

  • Page 413

    Cavity cartridge fuse mini fuse description m19 5 amp tan ign r/acc – sunroof/window sw illum m20 25 amp natural frt wiper m21 25 amp natural door locks m22 20 amp yellow fuel pump m23 20 amp yellow bat – trlr light/pre- safe #2 m24 20 amp yellow bat – trlr tow bux/ hgm m25 10 amp red bat – j1962 di...

  • Page 414

    Cavity cartridge fuse mini fuse description m35 20 amp yellow htd seat/htd str wheel/rear htd seat m36 20 amp yellow ign r-rear seat/steer wheel m37 10 amp red horn #1 m38 20 amp yellow iod-ccn/interior mods m39 30 amp green iod-amp/radio m40 25 amp natural rear wiper m41 15 amp blue iod-sdars/ves 2...

  • Page 415

    Cavity cartridge fuse mini fuse description m51 20 amp yellow asd #3 m52 10 amp red ign r/s-sway/ tcase/dtcm/ fad/trlr brake mod. M53 15 amp blue ign r/s-mfsw/ cnn/scm/tpm/rr view m54 20 amp yellow iod – spare caution! • when installing the totally integrated power mod- ule cover, it is important to...

  • Page 416

    Vehicle storage if you are storing your vehicle for more than 21 days, we recommend that you take the following steps to mini- mize the drain on your vehicle’s battery: • disconnect the ignition-off draw (iod) fuse located in the integrated power module, located in the engine compartment. The iod ca...

  • Page 417

    Note: for lighted switches, see your authorized dealer for replacement instructions. All of the inside bulbs are brass or glass-wedge base. Aluminum base bulbs are not approved. Light bulbs – exterior bulb no. Center high mounted stop lamp (chmsl) . . . . . 921 fog lamp . . . . . . . . . . . . . . ....

  • Page 418

    7. Reach into the front wheel house ahead of the front wheel, remove the fastener, and lift the cover over the access hole in the front of the wheel house splash shield. Access to the rear of the lamp can be gained through this access hole. 8. Reach through the access hole of the wheel house splash ...

  • Page 419

    10. Disconnect electrical connectors. 11. Replace bulb(s) as necessary. Caution! • do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result. • always use the correct bulb size and type for replacement. An inc...

  • Page 420

    Center high-mounted stoplamp (chmsl) with cargo lamp 1. Remove the two screws holding the housing/lens to the body as shown. 2. Separate the connector holding the housing and wir- ing harness to the body. 3. Turn the desired bulb socket 1 ⁄ 4 turn and remove the socket and bulb from housing. 7 maint...

  • Page 421

    4. Pull the desired bulb straight from the socket. Caution! Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result. • outside bulbs: cargo lamps • inside bulb: center high-mounted stop lamp 5. Reverse the p...

  • Page 422

    2. Rotate the socket 1 ⁄ 4 turn and pull it from the lamp assembly. 3. Pull the bulb straight from it’s socket and replace. 7 maintaining your vehicle 421.

  • Page 423

    Fluid capacities u.S. Metric fuel (approximate) standard rear tank 52 gallons 197 liters optional midship tank 22 gallons 83 liters engine oil with filter 5.7l engine (sae 5w-20, api certified) 7 quarts 6.6 liters cooling system 5.7l engine (mopar 威 antifreeze/coolant 5 year/100,000 mile formula) or...

  • Page 424

    Fluids, lubricants and genuine parts engine component fluid, lubricant, or genuine part engine coolant mopar 威 antifreeze/coolant 5–year/100,000 mile formula hoat (hy- brid organic additive technology) or equivalent. Engine oil – 5.7l engine use api certified sae 5w-20 engine oil, meeting the requir...

  • Page 425

    Chassis component fluid, lubricant, or genuine part automatic transmission (five-speed 545rfe) mopar 威 atf+4威 automatic transmission fluid or equivalent licensed atf+4 威 product. Transfer case mopar 威 atf+4威 automatic transmission fluid or equivalent licensed atf+4 威 product. Front and rear axle flu...

  • Page 426: Maintenance Schedules

    Maintenance schedules contents 䡵 emissions control system maintenance . . . . . . 426 䡵 maintenance schedule . . . . . . . . . . . . . . . . . . 426 ▫ 5.7l gas engine . . . . . . . . . . . . . . . . . . . . . 426 ▫ required maintenance intervals . . . . . . . . . . 428 8 m a i n t e n a n c e s c h ...

  • Page 427

    Emissions control system maintenance the scheduled maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions control system. These and all other maintenance services in- cluded in this manual, should be done t...

  • Page 428

    Note: • the oil change indicator message will not monitor the time since the last oil change. Change your vehicles oil if it has been 6 months since your last oil change even if the oil change indicator message is not illumi- nated. • change your engine oil more often if you drive your vehicle off-r...

  • Page 429

    Once a month • check tire pressure and look for unusual wear or damage. • inspect the battery and clean and tighten the terminals as required. • check the fluid levels of coolant reservoir, brake master cylinder, power steering and transmission and add as needed. • check all lights and other electri...

  • Page 430

    8,000 miles (13,000 km) or 6 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 8,000 miles (13 000 km). ❏ lube the front drive shaft fitting (4x4 only). Odometer reading date rep...

  • Page 431

    24,000 miles (39,000 km) or 18 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 24,000 miles (39 000 km). ❏ lube the front drive shaft fitting (4x4 only). ❏ inspect the cv joint...

  • Page 432

    40,000 miles (65,000 km) or 30 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 40,000 miles (65 000 km). ❏ lube the front drive shaft fitting (4x4 only). Odometer reading date ...

  • Page 433

    56,000 miles (91,000 km) or 42 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 56,000 miles (91 000 km). ❏ lube the front drive shaft fitting (4x4 only). Odometer reading date ...

  • Page 434

    64,000 miles (104,000 km) or 48 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 64,000 miles (104 000 km). ❏ replace the engine air cleaner filter. ❏ replace the spark plugs. ❏...

  • Page 435

    72,000 miles (117,000 km) or 54 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 72,000 miles (117 000 km). ❏ lube the front drive shaft fitting (4x4 only). ❏ inspect the cv joi...

  • Page 436

    88,000 miles (147,000 km) or 66 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 88,000 miles (147 000 km). ❏ lube the front drive shaft fitting (4x4 only). Odometer reading dat...

  • Page 437

    96,000 miles (160,000 km) or 72 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (160 000 km). ❏ replace the engine air cleaner filter. ❏ replace the spark plugs. ❏...

  • Page 438

    104,000 miles (173,000 km) or 78 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 104,000 miles (173 000 km). ❏ lube the front drive shaft fitting (4x4 only). ❏ flush and replac...

  • Page 439

    120,000 miles (199,000 km) or 90 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 120,000 miles (199 000 km). ❏ lube the front drive shaft fitting (4x4 only). ❏ inspect the cv j...

  • Page 440

    128,000 miles (212,000 km) or 96 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 128,000 miles (212 000 km). ❏ replace the engine air cleaner filter. ❏ replace the spark plugs....

  • Page 441

    144,000 miles (238,000 km) or 108 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 144,000 miles (238 000 km). ❏ if using your vehicle for any of the following: dusty or off-roa...

  • Page 442

    † this maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. Warning! • you can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about...

  • Page 444: Contents

    If you need consumer assistance contents 䡵 suggestions for obtaining service for your vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 445 ▫ prepare for the appointment . . . . . . . . . . . 445 ▫ prepare a list . . . . . . . . . . . . . . . . . . . . . . 445 ▫ be reasonable with r...

  • Page 445

    䡵 publication order forms . . . . . . . . . . . . . . . . 449 䡵 department of transportation uniform tire quality grades . . . . . . . . . . . . . . . . . . . . . . . . 451 ▫ treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 451 ▫ traction grades . . . . . . . . . . . . . . . . . . . . . 4...

  • Page 446

    Suggestions for obtaining service for your vehicle prepare for the appointment if you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager. ...

  • Page 447

    This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • if for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • if ...

  • Page 448

    Customer assistance for the hearing or speech impaired (tdd/tty) to assist customers who have hearing difficulties, the manufacturer has installed special tdd (telecommuni- cation devices for the deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a tdd...

  • Page 449

    We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to reso...

  • Page 450

    If nhtsa receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, nhtsa cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. T...

  • Page 451

    Llc vehicles. A complete working knowledge of the vehicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts. • diagnostic procedure manuals diagnostic procedure manuals are filled with dia- grams, charts and detailed illustrations. These pract...

  • Page 452

    Department of transportation uniform tire quality grades the following tire grading categories were established by the national highway traffic safety administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle....

  • Page 453

    Temperature grades the temperature grades are a (the highest), b, and c, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the mater...

  • Page 454: Index

    Index 10

  • Page 455

    Adding engine coolant (antifreeze) . . . . . . . . . . 394 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 322 adjustable pedals . . . . . . . . . . . . . . . . . . . . . . . 149 air cleaner, engine (engine air cleaner filter) . . . 384 air conditioner maintenance . . . . . . . . ....

  • Page 456

    Automatic transmission adding fluid . . . . . . . . . . . . . . . . . . . . . . . . . 403 fluid and filter changes . . . . . . . . . . . . . . . . . 404 fluid level check . . . . . . . . . . . . . . . . . . . 402,403 fluid type . . . . . . . . . . . . . . . . . . . . . . . . 402,424 shifting . . . ....

  • Page 457

    Carbon monoxide warning . . . . . . . . . . . . . . . 73,321 cargo light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 cellular phone . . . . . . . . . . . . . . . . . . . . . . . . 88,247 center high mounted stop light . . . . . . . . . . . . 419 center lap belts . . . . . . . . . . ....

  • Page 458

    Points to remember . . . . . . . . . . . . . . . . . . . . 396 pressure cap . . . . . . . . . . . . . . . . . . . . . . . . . 395 radiator cap . . . . . . . . . . . . . . . . . . . . . . . . . 395 selection of coolant (antifreeze) . . . . . . . . . 393,423 cruise control (speed control) . . . . . . ...

  • Page 459

    Tow hooks . . . . . . . . . . . . . . . . . . . . . . . . . . 371 towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372 emission control system maintenance . . . . . . 379,426 engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 377 air cleaner . . . . . . . . . . . . ...

  • Page 460

    Fluid level checks automatic transmission . . . . . . . . . . . . . . . . . 403 brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398 power steering . . . . . . . . . . . . . . . . . . . . . . . . 289 fluids, lubricants and genuine parts . . . . . . . . . . 423 fog lights . . . . . ....

  • Page 461

    Guide, body builders . . . . . . . . . . . . . . . . . . . . . . 6 gvwr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 hands-free phone (uconnect™) . . . . . . . . . . . . . . 88 hazard driving through flowing, rising, or shallow standing water . . . . . . . . . . . . . . . 285 ha...

  • Page 462

    Instrument panel and controls . . . . . . . . . . . . . . 176 instrument panel lens cleaning . . . . . . . . . . . . . 409 integrated power module (fuses) . . . . . . . . . . . . 410 integrated trailer brake controls . . . . . . . . . . . . . 334 interior appearance care . . . . . . . . . . . . . . ...

  • Page 463

    Cargo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 center mounted stop . . . . . . . . . . . . . . . . . . . 419 check engine (malfunction indicator) . . . . . . . . 189 courtesy/reading . . . . . . . . . . . . . . . . . . . . . 155 daytime running . . . . . . . . . . . . . . . . ...

  • Page 464

    Maintenance free battery . . . . . . . . . . . . . . . . . . 385 maintenance procedures . . . . . . . . . . . . . . . . . . . 381 maintenance schedule . . . . . . . . . . . . . . . . . . . . 426 malfunction indicator light (check engine) . . . . . 379 manual, service . . . . . . . . . . . . . . . . ...

  • Page 465

    Identification logo . . . . . . . . . . . . . . . . . . . . . 383 materials added to . . . . . . . . . . . . . . . . . . . . . 384 pressure gauge . . . . . . . . . . . . . . . . . . . . . . . 182 recommendation . . . . . . . . . . . . . . . . . . . . . . 383 synthetic . . . . . . . . . . . . . . . ....

  • Page 466

    Programming transmitters (remote keyless entry) . . . . . . . . . . . . . . . . . . . . 20 radial ply tires . . . . . . . . . . . . . . . . . . . . . . . . . 309 radiator cap (coolant pressure cap) . . . . . . . 393,395 radio operation . . . . . . . . . . . . . . . . . . . . . . . . 247 radio, satel...

  • Page 467

    Safety information, tire . . . . . . . . . . . . . . . . . . . 294 safety tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 satellite radio antenna . . . . . . . . . . . . . . . . . 232,241 satellite radio (uconnect™ studios) . . . . . . . . . . . 240 schedule, maintenance . . . . . ...

  • Page 468

    Transfer case, shifting out of transfer case neutral (n) . . . . . . . . . . . . . . . . . . . . . . . 348,352 shoulder belt upper anchorage . . . . . . . . . . . . . . 46 shoulder belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 signals, turn . . . . . . . . . . . . . . . . . . . . . ...

  • Page 469

    Tip start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263 tire and loading information placard . . . . . . 300,313 tire identification number (tin) . . . . . . . . . . . . . 298 tire markings . . . . . . . . . . . . . . . . . . . . . . . . . . 294 tire safety information . . . . . . ...

  • Page 470

    Cooling system tips . . . . . . . . . . . . . . . . . . . . 340 hitches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329 minimum requirements . . . . . . . . . . . . . . . . . 331 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 trailer and tongue weight . . . . . ...

  • Page 471

    Warning lights (instrument cluster description) . . . . . . . . . . . . . 179 warnings and cautions . . . . . . . . . . . . . . . . . . . . . 6 warranty information . . . . . . . . . . . . . . . . . . . . . 448 washers, windshield . . . . . . . . . . . . . . . . . . 147,389 washing vehicle . . . . ....

  • Page 472: 2 0 1 1

    C h a s s i s c a b chrysler group llc o w n e r ’ s m a n u a l 2 0 1 1 2 0 1 1 r a m t r u c k c h a s s is c a b 11dd43-126-ac second edition printed in u.S.A. Ram truck.