Installation manual model acc-30 6-disc cd changer 6 compact acc-30 digital audio 6 disc compact disc changer.
Cd magazine 1 pc. Index seal sheet 1 pc. Installation manual 1 pc. Owner's guide 1 pc. Installation parts accessories main unit 1 packing list changer mounting angle adjustment tool 1 pc. Hex head bolt with washer base (m5 x 12) 4 pcs. 5 meter din cable 1 pc. Screw hole cover labels 1 pc. Mounting b...
L this unit cannot be installed on its side, end, or upside down. Installation in such positions will cause malfunctioning of the mechanism. Installation and wiring precautions 2 to prevent a short-circuit, l be sure to turn off the ignition and remove the negative (-) battery cable, prior to instal...
Drill holes 1/8" (4mm) in diameter. Procedure for horizontal installation 1 2 3 bracket attach a mounting bracket to each side of the unit, using the 4 hex head bolts with washer base. Determine the mounting location, and drill four mounting holes. Secure the unit in place, using four self-tapping p...
Hex head bolt with washer base bracket bracket 4 2 attach a mounting bracket to each side of the unit, using the hex head bolts with washer base. Mount the unit in place, using four self-tapping phillips head screws. Use rtv (silicone sealer) on screw threads or around the holes to prevent moisture ...
4 2 attach a mounting bracket to each side of the unit, using the 4 hex head bolts with washer base. Mount the unit in place, using four self-tapping phillips head screws. Use rtv (silicone sealer) on screw threads or around the holes to prevent moisture intrusion. Set the anti-vibration springs to ...
Wiring 6 note: 1. Check with your rampage/audiovox audio dealer to be sure your stereo is directly compatible with this cd changer. 2. When used with rampage model av-427 car stereo, be sure changer selector switch on bottom of radio chassis is set to position "b". Din cable (8-pin) cd changer car s...
© 1999 audiovox corporation, happauge, n.Y. 11788 printed in korea 128-5572.