1. DL manuals
  2. Ramsey Electronics
  3. Receiver
  4. RX433
  5. Instructions Manual

Ramsey Electronics RX433 Instructions Manual

Summary of RX433

  • Page 1

    Rx-433 • 1 need a data transmitter or receiver for your remote wireless application? These compact units are perfect for any project; car alarms, door openers, home security, you name it! • saw resonators for high stability – no drift! • compact size with low current demand. • 433 mhz band. • sensit...

  • Page 2

    Rx-433 • 2 ramsey wireless rf links • txe433 or 916 transmitter & encoder module • rxd433 or 916 data receiver& decoder • tx433 or 916 data transmitter • rx916 data receiver ramsey transmitter kits • fm10a, 25 fm stereo transmitters • tv6 television transmitter • “cube” tv transmitters ramsey receiv...

  • Page 3

    Rx-433 • 3 the rx433 this wireless rf receiver has a data output that will match the data sent by the transmitter, tx433. The output is cmos compatible when the unit is run on +5 volts. The demod bandwidth is selectable by the placement of jumpers on the circuit board. The table on the schematic sho...

  • Page 4

    Rx-433 • 4 v+: attach your +5 volt source here. Gnd: attach your power supply ground here. Data output: access your data here. Data output will match data input to transmitter. Demod bandwidth select: jumper as shown in chart on schematic to change bandwidth antenna: attach your antenna here..

  • Page 5

    Rx-433 • 5 the ramsey kit warranty please read carefully before calling or writing in about your kit. Most problems can be solved without contacting the factory. Notice that this is not a "fine print" warranty. We want you to understand your rights and ours too! All ramsey kits will work if assemble...

  • Page 6

    Rx-433 • 6 price: $5.00 ramsey publication no. Mrx433 assembly and instruction manual for: ramsey model no. Rx433 ramsey electronics, inc. 793 canning parkway victor, new york 14564 phone (716) 924-4560 fax (716) 924-4555 www.Ramseyelectronics.Com printed on recycled paper.