- DL manuals
- Rancent Tech
- DVR
- DIGITAL VIDEO RECODER
- User Manual
Rancent Tech DIGITAL VIDEO RECODER User Manual - page 24
User Manual
21
Enter into [Language] menu to select the language you want to use
on the DVR (shown as Picture 5-40), and then click [APPLY] button.
The selection will be available after system Auto restarts.
Enter into [System Information] menu to view system info,
including Device type, Software (firmware) version, IE version and
MAC address etc.
When connecting multiple DVRs to the same local area network
environment, you need to change MAC address for each DVR
respectively; otherwise, you may not connect these DVRs to network.
When you set Password Enabled to “ON” (shown as Picture
5-38), you can setup a user password and administrator password
respectively. The password supports up to 6 characters.
The password defaulted by system is 123456.
Video System: allow you set Camera system (PAL, NTSC).
VGA Resolution: include five options - 1280×1024、1024×768、800
×
600 and 1440×900.
OSD Device: allow you select video output device, Main output and
VGA.User can hold pressing [Rew] button on the front panel to
convert output device quickly.
Poll time:allow you select sequence time between from 5s and
300s.
Picture 5-38
Picture 5-39(a)
Picture 5-39(b)
5.2.7.3 Video/Audio Setup
Click [Main Menu System Video/Audio] to setup Video and Audio parameters shown as Picture 5-39 (a).
5.2.7.4 Language
5.2.7.5 System Information
Click the [Volume] and/or [Margin] options on the right-bottom
corner of the Video/Audio screen to adjust the volume and/or margin
respectively. Details please kindly find the Picture 5-39 (b).
Picture 5-40
Picture 5-41
Summary of DIGITAL VIDEO RECODER
Page 1
. Rancent technologies ltd,. 10/f hong kong trade centre, 161 des voeux road centrl, hong kong tel: +852 2816 7037 fax: +852 2855 8158 digital video recoder user’s manual.
Page 2: Contents
User manual contents safety instruction ........................................................................................................................................................... 1 chapter 1: dvr features..................................................................................
Page 3
User manual 5.5 ptz c ontrol .................................................................................................................................................................... 23 5.6 r ecord ..............................................................................................
Page 4: Safety Instruction
User manual 1 safety instruction 1. Read instruction all the safety and operating instruction should be read before the equipment is operated. 2. Power sources this equipment should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of powe...
Page 5: Chapter 1: Dvr Features
User manual 2 chapter 1: dvr features function brief and description real-time monitoring double video output, with monitor or vga virtual output, support net-viewer and mobile live monitor, and also support zoom in/out, auto sequence and pip display. Record function h.264 video compression format; ...
Page 6: Chapter 2: Layout
User manual 3 chapter 2: layout 2.1 dvr front panel dvr is a short form of digital video recorder. 2.1.1 4-ch dvr front panel item key title or indicator remark function & description 1 power button power on/off 2 power indicator pwr if the “green” indicator is on the system is getting power normall...
Page 7: 2.1.2 8-Ch Dvr Front Panel
User manual 4 2.1.2 8-ch dvr front panel item key title or indicator remark function & description 1 power button power on/off 2 power indicator pwr if the “green” indicator is on the system is getting power normally. 3 ir receiver receives ir signal from remote controller 4 hdd indicator hdd when t...
Page 8: 2.2 Rear Panel
User manual 5 2.2 rear panel 2.2.1 4-ch dvr rear panel 2.2.2 8-ch dvr rear panel item physical port connection method 1 video input connect ch1-8 (virtual) video input device(bnc interface) 2 video output connect monitor output (bnc interface) 3 audio i/o 4ch dvr: 4ch audio input and 2ch output; 8ch...
Page 9: 2.3 Remote Controller
User manual 6 list2-4 list2-5 2.3 remote controller mouse operation except using buttons of front panel or remote controller, you also can use mouse to perform system operation. Type function click left key of mouse in menu lock mode, enter into pop-up menu and clicking any sub menu to pop up log-in...
Page 10: Chapter 3 Dvr Installation
User manual 7 chapter 3 dvr installation 3.1 hdd installation caution: 1. Please do not install or take out hard drive when dvr is running! 2. Some model has a hdd drawer. Please use provided key to take out the hdd drawer and put hdd into the drawer correctly. Hdd installation: after cutting power,...
Page 11: Chapter 4: Dvr Start Up
User manual 8 after connecting the power cable of dvr to wall outlet and pressing the power button on the front panel, you will enter into the system initializing screen shown as picture 4-1. After finishing initialization the system will enter into live screen. Picture 4-2 is the 9-split display de...
Page 12: 5.2 Main Menu Guide
User manual 9 5.2 main menu guide camera title set color set display set record record resolution record scheduled network static set dhcp set pppoe set ddns set hdd device manage alarm email set ptz set mobile motion area set search search/playback file list file backup log search log export system...
Page 13: 5.3 Main Menu
User manual 10 after clicking right button of mouse, pop-up menu appears on the screen. You can click [main menu] option on pop-up menu mode to enter into main menu interface (shown as picture 5-2). In main menu mode, you can control device management settings, such as display, record, network, sear...
Page 14
User manual 11 when selecting dhcp the router will allocate dvr ip address automatically after you exit the menu. The ip address of the dvr might change whenever the unit is turn on. [record ch] options include all, ch-1, ch-2, ch-3, ch-4, ch-5…ch-16 in turn. Please click the channel you need. To se...
Page 15
User manual 12 port forwarding is required when you want to access the dvr connected to the router from outside of the router’s network. 1. Input router’s ip address from ie-based browser to open the router configuration interface; 2. Click [transmittal rule] option to take you to the port forwardin...
Page 16
User manual 13 channel: allows you select the channel(s) you desire to search. Time search: in the video search screen, user can search for a specific date and time for a recording and view it in playback mode. This is useful for hunting a specific recording of an incident if you know the date and t...
Page 17
User manual 14 note: 1. Backup file will be saved as h264 format; you can playback the recorded files using the multimedia player program that comes with the dvr or through the net-viewer program. 2. Please make sure you have connected backup device, such as usb and dvd, well before backing-up. Log ...
Page 18
User manual 15 3. Select the playback file you desired from the file shown as picture 5-21. Note: please select the file with *.264 format or *.Nvr. The record file backed-up by u flash disk or removable disk is with *.264 format, and dvd recorder with *.Nvr format. 4. Open backup file double-click ...
Page 19
User manual 16 picture 5-25 picture 5-23 in the [device management] screen, highlight and click [hdd] icon to enter into the window shown as picture 5-24. Options in device management include hdd, alarm, ptz, mobile, motion and serial set. Click [main menu device management] option to enter into the...
Page 20
User manual 17 list 5-1 usb format: use this option to format usb devices. Note: itis an important first step when configuring your dvr to make sure that the hard drive (hdd) options are correctly set. So, it is strongly recommended that you do format the hdd before start the first record. 5.2.6.2 a...
Page 21
User manual 18 click [email set] to enter into the interface shown as picture 5-27. On the [email] screen, when enabling [email] option, you can set its parameters shown as picture 5-28. Email setup ssl: is a security link transport protocol. You can encrypt your communication info (including your e...
Page 22
User manual 19 enter into [main menu device ptz setup] to select the channel you desire to control and set ptz protocol (pelco-d or pelco-p), baud rate (1200, 2400, 4800, 9600), data bit (8, 7, 6, 5), stop bit (1, 2), parity check (none, odd, even, mark, space), address code and cruise status respec...
Page 23
User manual 20 the [system] menu includes the below sub-menus: time set, user password, audio/video setting, language select, system info and system maintenance. After entering into the [system] menu, you can configure the relative parameters to meet your needs. After entering into the [system] menu...
Page 24
User manual 21 enter into [language] menu to select the language you want to use on the dvr (shown as picture 5-40), and then click [apply] button. The selection will be available after system auto restarts. Enter into [system information] menu to view system info, including device type, software (f...
Page 25: 5.4 Menu Lock
User manual 22 this option allows you recover the dvr settings to factory default settings, update system software (firmware), and set system auto-maintenance. Click [main menu system maintain] to enter into the [system maintain] menu shown as picture 5-42(a). Auto maintain: after enabling [auto mai...
Page 26: 5.4 Record Search
User manual 23 5.4 record search you could enter into [record search] menu from pop-up menu conveniently and quickly and search/playback the record histories. We introduced record search details previously in section 5.2.4. 5.5 ptz control open auto cruise function on ptz setting menu if you want to...
Page 27: Chapter 6
User manual 24 chapter 6 : web application manager 6.1 plug-ins download and installation 1. Open your web browser and input the ip address and web port of dvr; 2. If your computer is connected to internet, you will be prompted to download and install “activex control”; 3. You may have “windows secu...
Page 28: 6.3 Web Client Interface
User manual 25 simultaneously audio / video will be automatically connected well (shown as picture 6-2(a) and (b). 6.3 web client interface 6.3.1 menu bar menu bar include [live], [playback], [remote setting], [local setting] and [logout] option and [language select] option on the right-up corner. 6...
Page 29
User manual 26 double-click any file listed or highlight any file and click [play] button to play the selected recording file. Click [download] button to download and save selected recording file to specified saving path shown as picture 6-4. You can set [save path] option on the [local setting] men...
Page 30
User manual 27 click [copy to] option on the right-bottom corner of the interface to copy all the remote setting to any channel shown as picture 6-5(c). Enter into [record set] option to set record control parameters, including record enabling, audio enabling, pack time, record mode and timer rec. S...
Page 31
User manual 28 click [channel alarm] option to enable or disenable i/o alarm, video loss and video cover for each channel (shown as picture 6-9). Clicking [output] option allows you set alarm output parameters, including buzzer time, post record time, alarm out time, and open pre-record function ptz...
Page 32
User manual 29 network parameters click [network parameters] option to enter into [network setting] menu, including [basic character], [pppoe], [ddns], [mobile] and [email set] (picture 6-12). Relevant parameters setting please refer to section 5.2.3 – [network setting]. Picture 6-12 picture 6-13 pi...
Page 33
User manual 30 device parameters click [device parameters] option to enter into the interface shown as picture 6-14. Now you can check device info (picture 6-14), software version (picture 6-17) and hdd info (picture 6-18) etc. Picture 6-17 picture 6-18 picture 6-15 picture 6-16.
Page 34
User manual 31 device manage extend [device manage] option to enter into sub menus – system setting, authority and dst shown as picture 6-20, picture 6-21 and picture 6-22. Picture 6-19 picture 6-21 picture 6-22 picture 6-20
Page 35
User manual 32 6.3.1.4 local setting the option allows you set [record save path], [frame save path] and [file save path] shown as picture 6-23. Note:remote manual recording file will be saved to record save path. Local recording file will be saved to [file save path]. 6.3.1.5 logout click [logout] ...
Page 36: Chapter 7: Specifications
User manual 33 chapter 7: specifications model parameter 4ch 8ch video system ntsc/pal(optional) video/audio compression format video:h.264 audio:8khz*16bit adpcm video i/o 4-ch bnc input; 2-ch bnc output; vga (optional); 8-ch bnc input; 2-ch bnc output; vga(optional); audio i/o 4-ch input / 2-ch ou...
Page 37: Chapter 8: Appendix
User manual 34 chapter 8: appendix 8.1 record alarm setting please refer the below matrix: “⊥” stand for “only alarm but no record”; “amr” stand for “alarm record”; “nlr” stand for “normal record”; and “nor” stand for “ no record”. Once alarm is triggered, alarm icon will occur, and when many alarms...
Page 38: 8.4 Troubleshooting
User manual 35 @yeah.Net smtp.Yeah.Net pop.Netease.Com www.Qq.Com @qq.Com smtp.Qq.Com pop.Qq.Com 163.Net smtp.163vip.Net popx.163vip.Net www.Sina.Com @sina.Com.Cn smtp.Sina.Com.Cn pop3.Sina.Com.Cn www.Yahoo.Com @yahoo.Com.Cn smtp.Mail.Yahoo.Com.Cn pop.Mail.Yahoo.Com.Cn @yahoo.Com smtp.Mail.Yahoo.Com...
Page 39: 8.5 System Configuration
User manual 36 10. Q: why does the buzzer keep sounding? A: please check if motion detection is on and the system has detected motion, make sure the hdd is being detected and has sufficient space available; check if video has lost etc. 11. Q: why can’t stop [stop] function? A: pressing [stop] button...
Page 40: 8.6 Accessories
User manual 37 8.6 accessories software cd usb mouse remote controller power cord power supply user manual.
Page 41
The material in this document is the intellectual property of our department . No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without our department prior written permission. Our products are under continual improvement and we rese...