- DL manuals
- Rand-Kar
- Toy
- X-AIR HANUMAN
- Assembly Manual
Rand-Kar X-AIR HANUMAN Assembly Manual - page 3
RAND KAR s.a. ASSEMBLY MANUAL XAIR HANUMAN 2007 October, 15
Page 3 / 88
IMPORTANTES RECOMMANDATIONS
POUR L'ASSEMBLAGE DE VOTRE U.L.M. X-AIR HANUMAN
Votre X-AIR HANUMAN est livré en
kit très avancé
: de nombreux sous-
ensembles sont déjà assemblés.
Le montage est très simplifié; cependant, il demeure que certains assemblages (peu
nombreux) doivent être abordés avec précaution.
Veuillez donc
lire attentivement et complètement ce qui suit avant d'entamer la
construction. Il est vivement recommandé de suivre la chronologie de ce manuel de mon-
tage. Il est basé sur notre expérience et les difficultés rencontrées.
Nous insistons pour que vous nous retourniez rapidement votre garantie (voir ma-
nuel général d’utilisation et d’entretien) dûment visée par votre revendeur et vous prions de
nous communiquer les coordonnées du nouveau propriétaire en cas de vente afin de faire
suivre les informations parfois vitales sur l’évolution de l’X AIR HANUMAN
Effectuez l’inventaire du kit et vérifiez qu’il ne manque rien.
( vous avez 15 jours pour signifier à votre revendeur tout manque de pièces )
En cas de doute, lors du montage , n'hésitez pas à contacter avant de faire des dé-
gâts
-Votre revendeur préféré qui se fera un plaisir de vous aider
-Notre société
RAND KAR sa
Canal de la Martinière 44320 Frossay - France
Tél. : +33 (0) 240 642 166 Fax : +33 (0) 240 641 522
http://www.randkar.fr
E-mail : xair-info@randkar.fr
Vous pouvez egalement vous inscrire au groupe de discussion dédié à l’X-AIR sur internet
(en anglais):
http://www.egroups.com/group/X-Air_Ultralight_Aircraft
N’hésitez pas à nous faire part de vos critiques et suggestions par
courrier postal ou électronique.
Nous vous souhaitons un bon travail
suivi de nombreux vols...
Conseils d’ami :
Excepté ceux qui fixent des Silentblocs caoutchouc et les vis montées dans les
inserts, tous les filetages des vis et écrous doivent être enduits de
Loctite frein
filet normal (ou produit équivalent) avant serrage. Ces écrous ne doivent être
utilisés qu’une fois et seront donc remplacés en cas de démontage.
Serrage : L’assemblage de tube / tube ou tube / pièces acier se fait serrage à
« contre » sans déformations des tubes
Pour le moteur, se référer au manuel du constructeur
Les références de pièces se présentent sous deux formes différentes :
-à trois chiffres, ils désignent un assemblage déjà pré monté
ex :
301
bord d’attaque d’aile assemblé
-à six chiffres, ils désignent un élément de ces assemblages
ex
301086
tube de bord d’attaque
Les vis et broches dont l’axe est vertical se montent la tête en haut.
Celles dont l’axe est horizontal et parallèle à l’axe de la quille se montent de
l’avant vers l’arrière (sauf impossibilité).
Se référer aux plans pour visualiser les différentes étapes du montage
Par exemple :Paragraphe A 11
Plan A 11
Paragraphe C 3
Plan C 3
Outillage nécessaire :
Clé plate ou à pipe de 7 / 10 / 13 / 14 / 17 / 19
Clé mâle de
3 / 4 / 5 / 6
Marteau à bout Nylon
Pince à rivet
Perceuse avec forêt de 4 / 5 / 6 / 8
Clé dynamométrique ( conseillé mais non indispensable )
Produits nécessaires
Loctite Bleu
Silastic Silicone ou équivalent
Graisse au silicone
Summary of X-AIR HANUMAN
Page 1
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 1 / 88 assembly manual manuel de montage *** x-air hanuman rand kar s.A. Raj hamsa ultralights pvt ltd canal de la martinière - 44320 frossay - france téléphone: + 33. (0)2.40.64.21.66 fax: + 33. (0)2.40.64.15.22 http://www.Randkar.Fr ...
Page 2
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 2 / 88 important advice for the assembly of your x-air hanuman ultralight. Your x-air hanuman is delivered in kit form with many pre-assembled units . Hence, assembly in considerably simplified; however, a few elements remain to assemb...
Page 3
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 3 / 88 importantes recommandations pour l'assemblage de votre u.L.M. X-air hanuman votre x-air hanuman est livré en kit très avancé : de nombreux sous- ensembles sont déjà assemblés. Le montage est très simplifié; cependant, il demeure...
Page 4
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 4 / 88 a/ cockpit assembly ——————— page 5 b/ installing fuselage ———— page 24 c/ empennage ————————– page 40 d/ fairing / canopy / windshield assembly ——–———-— page 44 e/ engine ——————————–—— page 54 f/ wings assembly ———————— page 60 ...
Page 5
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 5 / 88 a1) put sub-assembly 365 on the ground. -install 364r and 364l on 365. Do not glue or tighten bolts yet. This operation will be made in the end of chapter b. A/ airframe assembly a/ montage de la cellule a1) poser l’ensemble365 ...
Page 6
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 6 / 88 a2) position engine support 345 and fit it on tubes 364. A2) positionner le support moteur/fourche 345 à l’avant et le fixer sur les tubes latéraux 364. A2a a2 - rotax 582 a a a2 - rotax 912 a2 - jabiru a.
Page 7
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 7 / 88 a3) mount the rear cockpit side tubes 341 on main axle 365. (the longer straight part of the tubes marked « top »up) a4) install cockpit upper rear tube 369 on tubes 341. A3) monter les tubes arrière de cabine 341 sur l’axe prin...
Page 8
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 8 / 88 a5) install front cockpit side tubes 342, chamfer down and backwards. A6) install front tube 340. A5) poser les tubes verticaux de cabine avant 342, le chanfrein en bas et vers l’arrière. A6) poser le tube frontal 340. A5a a5 a ...
Page 9
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 9 / 88 a7) poser le tube supérieur horizontal de cabine avant 367 sur les tubes 342. Verifier que le boulon vh08069 est serré (a7a) a7) install cockpit front horizontal tube 367 on tubes 342. Check that the bolt vh08069 is torqued (a7a...
Page 10
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 10 / 88 a8) install cockpit horizontal upper side tubes 370l and 370r. A8) poser les tubes supérieurs latéraux de cabine 370l (gauche) et 370r (droit). A8a a9) install crosstube 370a and diagonal tubes 370b. A9) poser le tube 370a tran...
Page 11
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 11 / 88 a10) install rear under floor tube 362. Part 111401 is used to fasten the throttle cable for rotax 2 stroke engines. A10) poser le tube sous plancher arrière 362. La pièce nylon 111401 sert à l’accrochage du cable d’accelerateu...
Page 12
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 12 / 88 a13) install the u pulleys support on the floor. Install rudder pedals. Lubricate nylon housings with silicone grease. A13) reposer le support de poulies. Poser les paliers de palonniers et les palonniers 351. Lubrifier les pal...
Page 13
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 13 / 88 a14) lubricate nylon housings with silicon grease. Install control stick base 332 with one screw. Counter bore the holes in the floor through the nylon housings and fit a14) lubrifier les paliers à la graisse silicone. Position...
Page 14
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 14 / 88 a16) install main gear 347 right and left. Grease all moving parts including the sliding suspension tube. A16) monter le train principal 347 gauche et droit sur la structure. Graisser toutes les parties pivotantes et le tube de...
Page 15
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 15 / 88 a19) install upper entry cockpit tubes 343 by fitting them first forward, then backwards. Install lower entry cockpit tubes 344 by fitting them first forward, then back- wards (the one with the two nylon stoppers is the left on...
Page 16
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 16 / 88 a21) install the flap control tube 313. Lubricate nylon parts with silicon grease a21) poser le tube de commande de volets 313. Lubrifier les paliers nylon à la graisse silicone a20) install tubes 353, the longer tube up (nut i...
Page 17
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 17 / 88 a22) install the aileron control system 352. A22) monter la commande d’ailerons 352. A a22 a22a.
Page 18
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 18 / 88 a23) install flap control tube on flap handle (see drawing 368 in the spare parts document). Install the flaps handle + control tube 368 on airframe. A23) monter le tube de commande de volets sur la manette (voir des- sin 368 d...
Page 19
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 19 / 88 a24) install the frame one side on the floor. Install suspension bungees on the main landing gear (one front, one rear on each side, 4,5 laps for each bungee). A24) basculer la cellule sur le coté. Poser l’élastique de suspensi...
Page 20
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 20 / 88 a25) rince and install fuel tank 381. Fit the tank belts, two up and two below the tank. Connect the water trap to the tank with hoses 360298 (a25b). Connect the fuel line 135257 to the water trap (a25b). Connect the venting ho...
Page 21
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 21 / 88 a26) install throttle handles 337. A26) poser les commandes de gaz 337. A26 a.
Page 22
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 22 / 88 a27) install engine support tubes 361 right and left. Do not torque the screws on engine support yet. A27) poser les tubes support moteur 361 droit et gauche. Ne pas serrer les vis sur le support moteur maintenant. Note: verifi...
Page 23
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 23 / 88 a28) grease the wheel axels and install front wheel 354 and main landing gear wheels 355. Install brake cables 366 and connect them to the pedals. A28) poser la roue avant 354 et les roues du train principal 355 apres avoir gra...
Page 24
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 24 / 88 b1) fit fuselage upper tubes 318r and l and lower tubes 317r and l on the airframe. Fit the fin leading edge 321 on one of tubes 318, then on the se- cond and then on tubes 317. Note:do not apply loctite on the screws fitted in...
Page 25
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 25 / 88 b2) install frame 336 that bear the rudder cables and the rear elevator control tube. B2) poser le cadre 336 qui supporte les câbles de direction et la commande de profondeur. B2a a b2.
Page 26
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 26 / 88 b3) unroll the rudder cables to the cockpit and position them in their pulleys. Do not fit definitely to the rudder pedals yet. Attention: the cables are crossed (b3c) b3)derouler les cables de derive et les ramener au cockpit ...
Page 27
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 27 / 88 b5) install vertical side fuselage stiffeners 325 (4 on right side and 4 on left side). Glue and torque the bolts. B5) poser les tubes raidisseurs de fuselage laté- raux verticaux 325. Coller et serrer la boulonnerie. B4) insta...
Page 28
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 28 / 88 b6) install side diagonal stiffeners 329 from forward to backward and gluing-torquing definitly their bolts when they are all fitted. Torque the bolts that fit tuibes 325. B6) poser tous les raidisseurs diagonaux latéraux 329 e...
Page 29
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 29 / 88 b7) install longitudinal fuselage stiffeners 326 and triangular plates (b7c) (stored in bag 325) b7)poser les tubes raidisseurs de fuselage latéraux lon- gitudinaux 326 et les plaques triangulaires (b7c) (stockées dans le sache...
Page 30
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 30 / 88 b8) install cross stiffeners 327. Torque the bolts. B8)poser les tubes raidisseurs transversaux 327. Serrer les boulons. B8 a b c d b8d b8b b8a b8c.
Page 31
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 31 / 88 b9) install longitudinal fuselage battens 328 (one on top, two on bottom). Do not torque the screws in b9a and b9c. B9) poser les nervures longitudinales 328 (une au dessus et deux en dessous). Ne pas serrer les vis du dessus e...
Page 32
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 32 / 88 b10) remove the two upper hinges from the fib trailing edge 321. Position tube 322 on fin trailing edge 321 (b10d). Slide the fin sail on trailing edge 321. Put leading edge 320 in the sail and position it b10a). Fit leading ed...
Page 33
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 33 / 88 b11) remove the two plates from the tip of elevator control tube 316. Install the tube 316 and re-fit the plates. Fit the stopper cable (b11b). Apply silicon grease on the tube in the nylon housing backwards and between the pla...
Page 34
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 34 / 88 b12) install front part elevator control tube 314. Apply silicon grease on the moving parts for lubricate do not torque the front screw yet (b12b). B12) poser le tube de commande de profondeur partie avant 314 dans le cockpit. ...
Page 35
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 35 / 88 b13) install elevator fork 319. Apply silicon grease on the moving parts for lubricate b13) poser la fourche de commande de profondeur 319. Lubrifier l’articulation. B13 a b13a.
Page 36
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 36 / 88 b14) install trim sleeves and cables 357. Position the metallic sleeve end on the cable sleeves and slide cable into the sleeves. Position the sleeves on the airframe. Fit the metallic sleeve end so that the cables are lined up...
Page 37
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 37 / 88 b15) glue and torque all the bolts already instal- led, except upper front fork bolt (a). Fit shoulder harness cables in the fuselage(b15d). B15) coller et serrer toute la boulonnerie déjà installée sauf le boulon de fourche av...
Page 38
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 38 / 88 b16) position fabric on fuselage and fit backwards with velcro. Pull the rudder cables and the elevator fork out of the fabric. Slide nylon battens 334392 inside their housing under the fuselage fa- bric. Position battens 33030...
Page 39
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 39 / 88 b17) install sail 334377 with luggage rack behind the seats. B17) poser le panneau de toile intégrant le coffre à baggages 334377 derrière les sièges. B17.
Page 40
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 40 / 88 c1) install stabilizer 349 (right and left), checking that the leading and trailing edge are well in position on the ny- lon cone. Completely screw the fitting screw of upper cables (c1a)and position upper cables install horizo...
Page 41
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 41 / 88 c2) mount rudder horn on rudder (see drawing 308 on spare parts document). Check that the 3 rudder hinges are lined up.If not, it’s possible to move the position of the wrong hinges by inserting washer(s) or plastic saddle betw...
Page 42
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 42 / 88 c3) install elevator 307 (right and left). Connect trim cables to the trim c3) poser les gouvernes de profondeur 307 droite et gauche. Connecter les cables de trim au trim c3a a b c3 c3b.
Page 43
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 43 / 88 c4) install battery if the aircraft must be equipped with a jabiru engine c4) installer la batterie si l’appareil doit etre équipé d’un moteur jabiru c4a a c4.
Page 44
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 44 / 88 d / pod - canopy - windshield d / carenage - toit - pare brise d1) put the airframe on the tail. Remove front fork. Position the pod on the frame and fit it (d2a) mount the front fork. On the top of the pod, machine the holes f...
Page 45
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 45 / 88 d2) position firewall 384 in front pod 373 (foam on the cabin side). Drill firewall fitting holes on the pod. D2) positionner la cloison pare-feu 384 dans le carénage 373 (mousse coté cabine). Percer les trous de fixation de la...
Page 46
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 46 / 88 d3) install canopy 388. D3) poser le toit. 388. D3c a d3 c d b.
Page 47
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 47 / 88 d4) remove a stripe of 3cm wide of the windscreen protection all around the windscreen. Position windscreen on the airframe, install all the upper screws that fit the windscreen on the canopy without torquing. Drill the lower c...
Page 48
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 48 / 88 d5) install engine support tubes 335. D5) poser les tubes support moteur 335 a b d5-rotax 912 d5a-912 d5b-912.
Page 49
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 49 / 88 d5-jabiru a b d5b.
Page 50
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 50 / 88 d7) install and adjust dashboard 382. Drill the fitting holes. Remove the panel and fit instruments on it. Install electric wiring. Fit the dashboard in the cockpit. Connect definitly the rudder cables to the rudder pedals and ...
Page 51
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 51 / 88 d8) fit compass in its housing 386 install compass housing . D8) monter le compas dans son support 386. Poser le support compas. D9) install ailerons control cables. D9) installer les cables de commande d’ailerons. D8 a d9 a d9...
Page 52
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 52 / 88 d10) install lower cockpit sides 376 right and left. D10) poser les flancs de cockpit inferieurs 376 droit et gauche. D11) install windscreen stoppers to avoid it to bend at high speed. D11) poser des butées de pare-brise afin ...
Page 53
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 53 / 88 d12) install seats 380 in their railings. Secure with the 6 diameter pin at the end of the rails. D12) installer les sièges 380 dans leurs glissieres. Poser l’axe de 6 anti-deraillement en bout de glissiere.. D12.
Page 54
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 54 / 88 e / engine e / moteur e1) install the fuel pump and the fuel line on the firewall. Install regulator and starter relay (and eventually the bracket of the oil venting bottle for jabiru engine) on the firewall. Install the engine...
Page 55
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 55 / 88 rotax 582.
Page 56
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 56 / 88 jabiru 2200 the aluminium washers that fit the engine on its support are drilled at 6,35mm diameter . Drill them at 8mm diameter. Les rondelles aluminium de fixation moteur sont per- cées à diamètre 6,35. Les repercer à diamètr...
Page 57
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 57 / 88 e2) install the choke handle and cable and connect it to the carb(s). E2) poser la manette et le cable de starter et le connecter au(x) carburateur(s) e3) install the throttle cable and connect it to the handle and the carb(s)....
Page 58
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 58 / 88 e5) assembly the upper engine hood 372334 and lower engine hood 372335 together. Position the hoods on the aircraft, drill central hole n°1, then drill side holes alternatley e5) assembler les capots moteur supérieur 372334 et ...
Page 59
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 59 / 88 e6 a e6) fit under floor cover 377. E6) poser l’habillage composite sous plancher 377..
Page 60
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 60 / 88 f1) assembly the two leading edge parts 301 and trailing edge 302. Mount compression tubes 311 a and b, and tube 311387. Install tip tube 309(1 right and 1 left) without drilling or fitting its pin now. Note: on the above drawi...
Page 61
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 61 / 88 f1d f1e f1f f1g f1c f1h.
Page 62
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 62 / 88 f2) install wing root 312, aileron horn assembly 338a and its control tube 338b. Do not torque the screws that fit the wing root on leading and trailing edge yet (f2a and f2c) and those that fit the aileron and flap hinges. Tor...
Page 63
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 63 / 88 f3) install wings on the aircraft. If the leading edge pins (f3a), trailing edge pins (f3b) and strut base (f3c) does not completely go in their housing, just push them as far as possible without forcing. When the wing is in po...
Page 64
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 64 / 88 f4) check that the wing twist is similar on the two wings as follow: the aircraft being on a flat and horizontal surface, position on each wing a ruler with a level gauge. The rulers must be located a the same place on each win...
Page 65
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 65 / 88 f5) check you have clean hands. Position the wing fabric on a clean floor as shown on drawing f5. Slide the foam 375 into the wing sail leading edge. F5) verifier que vous avez les mains propres. Positionner la toile d’aile sur...
Page 66
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 66 / 88 f6) position wing on a clean floor, upside down remove ailerons and flaps hinges except the one at the wing tip end and the one located at the wing root. Slide the wing fabric on the wing frame taking care of not scraping any p...
Page 67
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 67 / 88 f7) tighten the sail tension at the wing root. Reinstall ailerons and flaps hinges (use tool 333236). F7) effectuer la tension de la toile a l’aide des cordelettes à l’emplanture. Plusieurs passes sont nécessaires. Reposer les ...
Page 68
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 68 / 88 f9) install wings on the aircraft. Fit the safety rings pins of the trailing edge with plastic ties (f9a) f9) monter les ailes sur l’appareil. Fixer les anneaux brisés des goupilles de bord de fuite avec des liens plastique (f9...
Page 69
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 69 / 88 f11) install upper cockpit sides 383 right and left. F11) poser les flancs de cockpit superieurs 383 droit et gauche.. F10) install jury struts 310 f10) installer les contrefiches 310. F11a f10 f11 a.
Page 70
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 70 / 88 g1) install flaps 371. The rod ends are set so that the profile axle of the flaps are parallel to the axle of fuselage upper tube. G1) poser les volets 371. Les rotules sont pré-reglées de façon à ce que la corde du profil de v...
Page 71
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 71 / 88 g3) install ailerons 306. Ailerons being lined up with flaps, check that the control sticks are vertical. If necessary, set the stick by adjusting theaieron cable turnbuc- kles on the top of cockpit. Secure turnbuckles with bra...
Page 72
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 72 / 88 h1) install doors 389. The hinge is positionned inside the cabin, behind windscreen. H1) poser les portes 389. La charnière se glisse derrière le pare-brise. Positionner la porte de façon a avoir assez de jeu entre les tubes de...
Page 73
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 73 / 88 h2) install wheel spats 379 h2) poser les carénages de roues 379 h2.
Page 74
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 74 / 88 i/ final tuning of controls and control sur- faces. This stage is all too often neglected. Yet, these adjustments make all the difference between an aircraft that gives smooth, coherent response, and a cantankerous, even danger...
Page 75
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 75 / 88 5)weight balance weighing operation must be done with 3 similar weighing machines on an horizontal surface. Cg=150xa/a+b+c the result must be located between 22 and 38,5 6) lubrication: the ideal lubricant is a silicone spray (...
Page 76
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 76 / 88 i/ reglage final des controles et gouvernes voici une partie qui est couramment négligée, bien malheureusement car ce sont ces réglages qui feront la différence entre, d'une part un avion confortable et homogène au pilotage, et...
Page 77
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 77 / 88 5) centrage la pesée doit etre effectuée avec trois balances identiques positionnées sous chaque roue et sur un plan horizontal cg=150xa/a+b+c la valeur obtenue doit être comprise entre 22 et 38,5 6) lubrification: l'idéal est ...
Page 78
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 78 / 88 taking down and transport preparing the aircraft for transport on a trailer or for off airport storage is a simple operation that needs two people and about 1/2 an hour. It’s recommended to proceed as follows: to avoid losing t...
Page 79
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 79 / 88 dÉmontage et transport la préparation de la machine en vue d’un transport sur remorque ou d’un stockage dans un local réduit est une opération simple nécessitant deux per- sonnes et une petite heure. Il est recommandé de procéd...
Page 80
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 80 / 88.
Page 81
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 81 / 88.
Page 82
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 82 / 88 option parachute alpha on x-air hanuman -parachute is fitted behind the passenger’s seat following dawing abc. Montage parachute a b c 200 a b c.
Page 83
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 83 / 88 -fit the straps at the four upper cabin knots. Take care of the routing of the straps that must go over the upper cabin tubes. The straps are then connected to the main parachute strap. With the big safety hook. -using a solder...
Page 84
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 84 / 88 option parachute alpha sur x-air hanuman -le parachute se fixe derrière le siège passager suivant les plans abc ci-contre montage parachute alpha sur hanuman a b c b c 200 a.
Page 85
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 85 / 88 -fixer les sangles aux quatre nœuds supérieurs de cabine. Elles doivent cheminer au dessus des tubes supérieurs de cabine les sangles sont ensuite raccordées à la sangle de parachute au moyen du gros mousqueton. -a l’aide d’un ...
Page 86
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 86 / 88.
Page 87
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 87 / 88 to make warranty efficient, this form have to be returned to rand kar sa canal de la martinière f - 44320 frossay - france warning even in the best of conditions, ultralight flying may be hazardous. The user of this ultralight ...
Page 88
Rand kar s.A. Assembly manual xair hanuman 2007 october, 15 page 88 / 88 formulaire de garantie a retourner à rand kar sa canal de la martinière f - 44320 frossay - france avertissement le vol en u.L.M, même entrepris dans les meilleures conditions comporte certains risques que l'utilisateur de cet ...