Owners manual 300 watt guitar head.
Dear randall owner, congratulations on the purchase of your new randall amplifier, and thank you for the support of our product line. Randall amps are made to strict quality and consistent performance standards, that will provide you with years of musical satisfaction. Please read the following manu...
Caution: to prevent fire or electrical shock, do not expose to rain or moisture ! Exclamation point: the exclamation point within an equalateral triangle, is intended to alert the user of the presence of important operating and maintenance or service instructions in the literature accompanying the p...
Front panel features and controls channel switching: the x2 incorporates 2 base channels with 3 modes of operation. Channel switching can be achieved by using either the front panel push button, or the included 4-button midi foot controller. When using the front panel button simply push and release ...
Rear panel features 1. Ac power/voltage selector: this amplifier can operate at ac currents of 100v, 110v, 120v, 230v. Simply remove the fuse with a small screwdriver, and line up the correct voltage with the arrow, and plug back in. After selecting the correct voltage, connect the ac power cord the...
Programming the x2 footswitch press, hold, and release channel select button to store footswitch buttons and effects to each chan- nel. (clean, o.D., fry) when using the included midi foot controller, it may require reprogramming to each channel, before it will work correctly. Please follow the list...
1. E f f e c t s l o o p : rear panel feature included the assignable ef fects loop. When using the loop without the foot controller, you can choose each channel you want with effects by simply pressing the loop assign but- tons. When any or all of the buttons have been pressed in those particular c...
Input ch. Select clean ch. Gain 1 master 1 gain 2 master 2 overdrive/fry green/o.D. Red/fry density bass - + flat equalization sweep 200hz 2k mid level mid freq. Treble presence power press 1/clean press 2/o.D. Press 3/fry in out thru in midi 4 x 12" stereo/mono cabinet you must select which channel...
Input ch. Select clean ch. Gain 1 master 1 gain 2 master 2 overdrive/fry green/o.D. Red/fry density bass - + flat equalization sweep 200hz 2k mid level mid freq. Treble presence power press 1/clean press 2/o.D. Press 3/fry input ch. Select clean ch. Gain 1 master 1 gain 2 master 2 overdrive/fry gree...
