Randell 9918SCA Specifications

1055 Mendell Davis Drive, Jackson, MS 39272

888-994-7636, fax 888-266-5244

Information contained in this document is known to be current and accurate at the time 

of printing/creation.  Unified Brands recommends referencing our product line websites, 

unifiedbrands.net, for the most updated product information and specifications.

Randell Drop-In, Page 1

Revised 06/06

Drop-In Wrapped Coldwall Cold Pan 

models 9900SCA/SCN

model 9986SCA shown

Specifications:

Condensing unit mounted on a swivel platform that allows for 

90 degrees of rotation of intake/exhaust louver, giving customer 

the option of mounting our louver on any of the counters four 

sides.  Model 9918SCA is not available with rotating compressor 

housing.

UNIT EXTERIOR: Top and coved corner interior to be constructed 

of 18 gauge stainless steel. Exterior body to be corrosion resistant 

steel. Condensing unit mounted on corrosion resistant framework, 

suspended below unit body. (1) stainless steel louver panel provided 

for field installation in counter.

UNIT  INTERIOR:  Interior  fitted  with  1"  drain  at  one  end.  Drain 

nipple supplied with gate valve. Insulated with CFC free, foamed 

in place polyurethane. Recessed, stainless steel ledge provided 

for supporting pans, adaptor bars included on SCA units.

REFRIGERATION:  CFC  free,  R-404a  refrigeration  system  to  be 

wrapped refrigeration construction with thermostatic control for 

operator adjustability. Entire system mounted on corrosion resistant 

framework, suspended below unit body. 8' cordset (NEMA 5-15P) 

supplied for 115V operation.

Standard Features:

• Swivel base condensing unit allows for unlimited 

   location of the single air intake/exhaust louver (model 9918SCA

   is not available with rotating compressor housing.

• New Randell exclusive easy mount system

• Self-contained, wrapped refrigeration system with thermostatic 

   control, system utilizes “CFC free”, R-404a refrigerant

• Meets 1998 NSF Std. #7 - holds 41°F product temperatures

• All stainless steel top and coved corner interior

• Drain and gate valve provided

• Foamed in place, “CFC free” urethane insulation

• One dual air movement louver provided

• 9' corset for 120V plug-in operation

Description:

Self-contained, wrapped coldwall drop-in refrigerated cold display 

pan with one piece stainless steel interior and top. Drain, and gate 

valve provided.  R-404a refrigerant, “CFC free”. Wrapped refrig-

eration construction with condensing unit, expansion valve, and 

thermostatic control. Cordset for 115V operation.

Meets NSF Std. #7 for holding 41˚F. product temperatures.

model  

        9918SCA         9928SCA        9943SCA        9957SCA       9972SCA        9986SCA        

                    9946SCN        9966SCN         9987SCN

model 9966SCN shown

• Self-contained, refrigerated unit for cold display without ice

• Custom sizes available

• Easy installation with sliding hood, louver and hold 

   down brackets

Options & Accessories:

Adaptor bars

Remote on/off switch