Rane MM 42 Operator's Manual - page 8
Manual-
Adjusting Input Levels
The Input Levels page is automatically displayed any time an
INPUT A/B/C/D control is adjusted.
INPUT | A B C D
LEVELS | 0.0dB 0.0dB 0.0dB 0.0dB
Input Levels
Parameter
Value
Description
INPUT A/B/C/D
+12.0 dB
to
-40.0 dB
Input level adjustment.
Turn INPUT Level for
1 dB increments. Push
and turn for 0.5 dB
increments.
Adjusting Output Levels
The Output Levels page is automatically displayed any time the
OUTPUT control is adjusted. This page differs slightly depend-
ing on the currently selected configuration mode. In STEREO
mode, use the and keys or bump (push and release) the
OUTPUT control to navigate between the Output LEVEL
and Left/Right BALANCE parameters. Rotate the OUTPUT
control to adjust each parameter.
OUTPUT | LEVEL
LEVEL | 0.0dB |
<————|——————>|
Output Levels (Stereo Mode)
Parameter
Value
Description
OUTPUT
LEVEL
+12.0 dB
to
-40.0 dB
or
off
Stereo output level
adjustment. Turn
OUTPUT Level for 1 dB
increments. Push and turn
for 0.5 dB increments.
BALANCE
Full left to
full right
Stereo balance.
In 2-MONO mode, use the and keys or bump (push
and release) the OUTPUT control to navigate between the
Output 1 and Output 2 Level parameters. Rotate the OUTPUT
control to adjust each parameter.
OUTPUT | 1 2
LEVELS | 0.0dB 0.0dB
Output Levels (2-Mono Mode)
Parameter
Value
Description
OUTPUT 1
LEVEL
+12.0 dB
to
-40.0 dB
or
off
Output 1 level adjustment.
Turn OUTPUT Level for
1 dB increments. Push and
turn for 0.5 dB increments.
OUTPUT 2
LEVEL
Output 2 level adjustment.
Turn OUTPUT Level for
1 dB increments. Push and
turn for 0.5 dB increments.
To view a level setting without changing it simply push and
release the control without turning it. The DATA control has no
effect when adjusting Input and Output levels.