1. DL manuals
  2. Rane
  3. DJ Equipment
  4. MP 2016S
  5. Operator's Manual

Rane MP 2016S Operator's Manual

Summary of MP 2016S

  • Page 1

    Mp 2016s rotary mixer xp 2016s external processor schematics are downloadable from dj.Rane.Com sig / ol cue 1 cue 2 engage sig / ol mix level 4 input gain 2 3 9 11 0 8 6 5 7 4 2 3 9 11 0 8 6 5 7 cue pgm power stereo xp 2016s master cue effects loop mono booth +6 off 0 treble 12 sig / ol mix level 4 ...

  • Page 2

    Risk of electric shock do not open caution to reduce the risk of electrical shock, do not open the unit. No user serviceable parts inside. Refer servicing to qualified service personnel. The symbols shown below are internationally accepted symbols that warn of potential hazards with electrical produ...

  • Page 3

    Manual-1 mp 2016s rotary dj mixer operators manual quick start the mp 2016s has split cue! If you don’t know what that is, we suggest you take the time to read this entire manual so you learn lots of other things to get the best sound and features out of your new mixer. But if you know what split cu...

  • Page 4

    Manual-2 mp 2016s front panel controls input selectors 1-4 each six-position input selector chooses a dedicated phono / line preamplifier, or one of five stereo line-level aux inputs as its input channel source. (phono / line switches are on the rear panel). Input selectors 5-6 each six-position inp...

  • Page 5

    Manual-3 headphone monitor monitor determines the source of the phones signal. With the monitor mono switch out, the control pans between stereo cue and stereo pgm signals. The pgm signal follows the house output (same signal going to the master house). With monitor mono selected (in), the monitor c...

  • Page 6

    Manual-4 rear panel inputs & outputs important note: chassis grounding if after hooking up your system it exhibits excessive hum or buzzing, there is an incompatibility in the grounding configura- tion between units somewhere. If your equipment is in a rack, verify that all chassis are tied to a goo...

  • Page 7

    Manual-5 aux inputs 1-5 rca jacks these five stereo aux inputs are unbalanced, line level inputs available for selection on all six input channels. Xp 2016s external processor the xp 2016s port provides the required socket for connecting the ribbon cable (supplied with the optional xp 2016s). If an ...

  • Page 8

    Manual-6 operation riaa phono/line inputs input channels 1 through 4 each have a dedicated preamplifier. A rear panel switch allows setting these preamps for phono or line level signals. Make sure you have the switch in the correct position for your application. The source selectors for input chan- ...

  • Page 9

    Manual-7 optional xp 2016s external processor combining the optional xp 2016s external processor with the mp 2016s adds three-band, full-cut, accelerated-slope™ tone controls and a-post-b crossfader assign switches for each of the six input channels. You also get a high-performance active-crossfader...

  • Page 10

    Manual-8 ©rane corporation 10802 47th ave. W., mukilteo wa 98275-5000 tel 425-355-6000 fax 425-347-7757 web rane.Com power this iec320-c5 power jack receives the power cable shipped with the unit. Mp 2016s mixer port this is the required socket to connect the xp 2016s to the mp 2016s, using the ribb...