Mp 22z club mixer cu e le ft cu e pg m pg m r ig h t m on o +8 +5 +1 +3 pe ak d bu -3 -1 -7 -5 -1 0 -1 5 -2 0 le ft ri gh t 0 cu e/ pg m 6 4 10 8 0 8 2 zo n e 2 6 4 6 10 2 0 zo n e 1 8 10 10 8 0d b 2 4 4 2 0 4 2 4 cut eq e n ga ge 2 bo os t 10 8 4 6 2 4 2 4 4 cut 10 0d b 2 4 cut 6 2 4 bo os t bo os ...
Risk of electric shock do not open caution to reduce the risk of electrical shock, do not open the unit. No user serviceable parts inside. Refer servicing to qualified service personnel. The symbols shown below are internationally accepted symbols that warn of potential hazards with electrical produ...
Manual-1 operators manual mp 22z club mixer quick start if you won’t read the manual (we know how it is) here are a few basic “plug it in and get signal thru it” facts. The mp 22z has all unbalanced rca connectors, except for the xlr & ¼" mic inputs, ¼" mic loop, and the balanced ¼" trs master outpu...
Manual-2 front panel description 1 front panel main mic input: use this xlr connector for connecting a balanced microphone of any impedance. 2 mic eq controls: adjust the frequency contour of both microphone inputs. They have no effect on any other inputs. Position- ing these controls to the “12 o'cl...
Manual-3 w main & remote mic overload indicator: monitors both microphone inputs, before and after the mic eq. It lights whenever these levels exceed 4 db below clipping. Occasional flickering is normal; however, it should not be allowed to light steadily. E main mic engage switch: when pressed, enga...
Manual-4 rear panel description 1 remote mic/line input: this ¼" tip-sleeve input is for wireless mics or other high-impedence sources. 2 microphone loop jacks: these ¼" tip-sleeve connectors are for inserting external signal processing in the microphone circuit only. These jacks do not effect the ot...
Manual-5 mp 22z connection when first connecting the mp 22z to other components, leave the power supply for last. This gives you a chance to make mistakes and correct them without damaging your fragile speak- ers, ears and nerves. All of the line level inputs are unbalanced rca connec- tors. Inputs p...
Manual-6 operating instructions initial operation for starters, connect a cd player to line 1 input and set the phono/line switch to line. If a turntable is used, set this switch to phono. Make sure all faders are set to zero, the mic and eq are disengaged (switches out) and all rotary con- trols ar...
