Rane RA 30 Operator's Manual

Summary of RA 30

  • Page 1

    Ra 30 realtime analyzer use rane mic onl y! Anal yzer real time ra 30 gain cal mic source 0 db meter r t a scale normal 1 3 6 120 100 80 weight c a r ta meter noise pink vu spl sig ol +12 -12 cal -5 -27 -30 -24 -25 -21 -15 -18 -20 -12 -9 -15 -6 -3 -10 +3 +12 +6 +9 0 db db 6.3k 50 25 31.5 40 160 63 8...

  • Page 2

    105552 important safety instructions for the continued safety of yourself and others we recommend that you read the following safety and installation instructions. Keep this document in a safe location for future reference. Please heed all warnings and follow all instructions. Do not use this equipm...

  • Page 3

    Manual- operators manual ra 30 realtime analyzer quick start since the ra 30 does rta, spl, and vu all in one, the first-time user can get a little lost. The real quick start is in the step-by step instructions on page manual-4. This will tell you how to set up the ra 30 for your application. In add...

  • Page 4

    Manual- front panel description analyzer display leds are in a 5 by 30 array (3 color). 0 db point is for vu meter mode (source=line in, gain to +4 dbu or -10 dbv, meter/rta button=meter). 0 db point is for spl meter mode (source=cal mic, gain to center detent, meter/rta button=meter). See the range...

  • Page 5

    Manual- rear panel description ra 30 connection system hook-up connect the ra 30 into your system as shown below. Plug the rane condenser microphone into the front panel mic input. Caution: do not plug any other microphone into the front panel jack: this jack contains a t-power dc voltage which may ...

  • Page 6

    Manual- step by step instructions i. Stereo vu meter a. Connect program source to the line inputs on the rear. If mono operation is desired, connect the mono program source to the left input. B. Set the source switch to line in. C. Set the gain control to the center detent to calibrate the 0 db mark...

  • Page 7

    Manual- alignment instructions since the ra 30 features a unique form of realtime analyzer, we highly recommend that you read this section before perform- ing an alignment with pink noise. If you’ve never used an ana- lyzer before, use these instructions on your first occasion. You’ll be delighted a...

  • Page 8

    Manual- ©rane corporation 080 7th ave. W., mukilteo wa 987-098 tel --000 fax -7-777 web www.Rane.Com 105553 noise test settings the same amount at each performance; make a note of these further adjustments to save future tweaking dur- ing performances. For example, you note the pink noise settings a...