Rane SEQ 30L Operator's Manual

Manual-1

OPERATORS  MANUAL

QUICK START

If this is your first equalizer, please do yourself and

your speakers a favor and read at least the first five

pages. “An ounce of prevention...,” and all that.

The SEQ 30S is a stereo equalizer, so adjusting any

slider affects both channels simultaneously. Begin by

setting all sliders to their center detent (0 dB), and the

INPUT LEVEL to its center detent (0 dB). Try to make

more cuts than boosts. After equalizing, use the EQ

switch to compare equalized and non-equalized signal.

While EQ is switched to ACTIVE (out), adjust the

INPUT LEVEL to the same level as when EQ is

switched to BYPASS (in).

You may use either the XLR or ¼" connectors for

Inputs or Outputs. Connect only one INPUT type per

channel. The XLR and ¼" TRS inputs do not sum. You

may, however, use both types of OUTPUTS simulta-

neously if desired.

WEAR PARTS: This product contains no wear parts.

SEQ 30S

STEREO GRAPHIC EQUALIZER