Range Master RMB60HPEIGL User Manual - Electrical Connections

Summary of RMB60HPEIGL

  • Page 1

    Rmb60hpeigl/ induction hob user guide & installation & service instructions u110602-05.

  • Page 3: Contents

    Contents 1. Before you start... 1 installation and maintenance 1 ventilation 1 personal safety 1 hob care 2 cleaning 2 2. Hob overview 3 the hob 3 heat settings 4 pan detector, 4 residual heat indicator, ‘ h ’ 4 operating the hob 4 boost function 5 key lock function 6 automatic shutdown 6 3. Cleanin...

  • Page 5: Installation and Maintenance

    1 thank you for buying a rangemaster hob. It should give you many years trouble-free cooking if installed and operated correctly. It is important that you read this section before you start, particularly if you have not used an induction hob before. This appliance is designed for domestic cooking on...

  • Page 6: Hob Care

    2 hob care do not use the hob surface as a cutting board. Do not leave utensils, foodstuffs or combustible items on the hob when it is not is use (e.G. Tea towels, frying pans containing oil). Do not place plastic or aluminium foil, or plastic containers, on the hob. Do not leave the hob zones switc...

  • Page 7: The Hob

    3 0 0 0 0 diameter: 180 mm max: 1.4 kw diameter: 220 mm max: 1.85 kw boost: 2.1 kw diameter: 180 mm max: 1.4 kw diameter: 220 mm max: 1.85 kw boost: 2.1 kw when you first switch on the hob after connection, a rapid self-test of the control unit (calibration adjustment) is then carried out. The induc...

  • Page 8: Heat Settings

    4 heat settings the exact setting will depend on several factors, including your cookware and the amount you are cooking. Experiment with the induction hob to find the settings that best suit you. Table 2.1. Is a guideline of the type of cooking can be used per power level. Pan detector, if a cookin...

  • Page 9: Boost Function

    5 boost function this function allows for rapid heating on the selected zone. Once the selected zone has reached the required cooking temperature the power level will reduce automatically to the preset level. To activate the pre-heat function 1. Select the required cooking zone with a boost function...

  • Page 10: Key Lock Function

    6 key lock function this allows the control panel to be locked to prevent any accidental use. N n important: the hob is equipped with a key lock to lock the controls. This can be used when all hobs are off. To switch on the key lock 1. Press the right front zone button and “-” key together (fig. 2.6...

  • Page 11

    7 over-temperature protection a temperature sensor can monitor the temperature within the induction hob. When an excessive temperature is monitored, the induction hob will stop operation automatically. Small object safety when an unsuitable size or non-magnetic pan (e.G. Aluminium), or some other sm...

  • Page 12: Hob

    8 3. Cleaning your cooker isolate the electricity supply before carrying out any major cleaning. Allow the cooker to cool. N n never use paint solvents, washing soda, caustic cleaners, biological powders, bleach, chlorine based bleach cleaners, coarse abrasives or salt. Do not mix different cleaning...

  • Page 13: 4. Troubleshooting

    Docno.050-0001 - troubleshooting - induction generic 9 n n interference with and repairs to the hob must not be carried out by unqualified persons. Do not try to repair the hob as this may result in injury and damage to the hob. Please arrange for repair by a suitably competent person. Note: the ind...

  • Page 14

    10 error display description possible fault cause fault correction er03 and permanent tone continuous button actuation; control switches off after 10 secs water or cookware on the glass over the control clean the user interface er22 button analysis defective, control switches off after 3.5-7.5 sesz ...

  • Page 15: Dear Installer

    11 installation check the appliance is electrically safe and gas sound when you have finished. Dear installer before you start your installation, please complete the details below should your customer have a problem relating to your installation they will be able to contact you easily. Safety requir...

  • Page 16: Positioning The Hob

    12 installation check the appliance is electrically safe and gas sound when you have finished. Positioning the hob it is recommended that the hob be installed in a worktop with a minimum thickness of 38 mm and depth of 600 mm. The cut-out dimensions and the recommended minimum clearances from the ho...

  • Page 17: Electrical Connections

    13 installation check the appliance is electrically safe and gas sound when you have finished. Fixing the seal to the back of the hob the hob must be sealed to the work surface to prevent liquid from entering into the cabinet. A tape seal is supplied with the hob. 1. Turn the hob over and place on a...

  • Page 18: 6.   Circuit Diagram

    14 6. Circuit diagram n2 n1 n l2 l1 l1 1p+n 230v bet w een l and n connec tion b ox gr id / p ow er supply.

  • Page 19: 7.   Technical Data

    15 7. Technical data installer: please leave these instructions with the user. Data badge location: base of the hob. Country of destination: gb, ie. Dimensions outside inside width 510 mm 485 mm length 580 mm 550 mm depth 53 mm from top 49 mm space for fixing see positioning of the hob “fig. 5.1” on...

  • Page 20

    16 hotplate efficiency data brand rangemaster model identification rmb60hpeigl/ size (mm) 580 type induction type of hob induction number of electric zones 4 zone 1 - Ø cm 220 heating technology electromagnetic heating energy consumption (ecelectric cooking) - wh/kg 162.3 zone 2 - Ø cm 180 heating t...

  • Page 21

    17 if consultation or technical assistance is needed, please provide the local authorised service agent with the purchase invoice and the product code/serial number. The 2 years free maintenance for the operation of the appliance started from the date of purchase of this product. Any cosmetic damage...

  • Page 22

    18.

  • Page 23

    19.

  • Page 24

    Clarence street, royal leamington spa, warwickshire, cv31 2ad, england. Tel: +44 (0) 800 8046261 e-mail: consumers@agarangemaster.Co.Uk.