1. DL manuals
  2. Rangemaster
  3. Cookers
  4. 90 INDUCTION U109941 - 02
  5. Installation And User Manual

Rangemaster 90 INDUCTION U109941 - 02 Installation And User Manual

Manual is about: Rangemaster Cooktop User Manual

Summary of 90 INDUCTION U109941 - 02

  • Page 1

    90 induction professional + user guide & installation & service instructions u109941 - 02.

  • Page 2

    Contents 1. Before you start... 1 2. Cooker overview 3 3. Cooking tips 11 4. Fan oven cooking table 12 5. Cleaning your cooker 13 6. Troubleshooting 16 7. Installation 18 8. Servicing 22 9. Circuit diagrams 27 10. Technical data 29.

  • Page 3

    1 1. Safety thank you for buying a rangemaster cooker. It should give you many years of trouble-free cooking if installed and operated correctly. It is important that you read this section before you start, particularly if you have not used an induction cooker before. This appliance is designed for ...

  • Page 4

    2 use dry oven gloves when applicable – using damp gloves might result in steam burns when you touch a hot surface. Do not use a towel or other bulky cloth in place of a glove – it might catch fire if brought into contact with a hot surface. Never operate the cooker with wet hands. Do not use alumini...

  • Page 5

    3 artno.312-0004 correct pans ceramic 2. Cooker overview the 90 induction cooker (fig.2-1) has the following features: a. 5 induction cooking zones b. A control panel c. A glide-out grill d. Main programmable fan oven e. Tall fan oven the hob use only pans that are suitable for induction hobs. We re...

  • Page 6

    4 artno.313-0003 110 induction hob display make sure that the base of the pan is clean and dry to prevent any residue burning onto the hob panel. This also helps prevent scratches and deposits. Always use pans that are the same size as (or slightly larger than) the areas marked on the hob....

  • Page 7

    5 once the [a ] is displayed, turn the control knob to the level of your choice (1 to 9). The pan will heat up at 100% power for a specifi ed time before the power is reduced to the level selected. When the automatic heat-up function is activated, the hob control display will fl ash alternately betwee...

  • Page 8

    6 once the grill has preheated, slide the carriage out again. With the trivet back in place with the food on it, slide the carriage back into the grill chamber. Ensure that it is pushed right in. Accessible parts may be hot when the grill is in use. Young children should be kept away. The grill pan ...

  • Page 9

    7 the clock setting the time of day the lcd clock is shown in (fig.2-13). When the clock is first connected, the display flashes ( 0.00) and ( ) alternately. To set the time, turn and hold the timer knob to the clock symbol ( ) and at the same time turn the adjusting knob left or right until the clock...

  • Page 10

    8 if you are out, do not worry about the beeper going off – it will stop on its own after a while. When you return, turn the timer knob to the vertical () to return to manual cooking. Auto is showing, but you want to revert to manual cooking you can cancel any automatic settings by briefly turning th...

  • Page 11

    9 artno.320-0010 flat & drop shelves artno.320-0013 removing the shelf 3 artno.320-0014 handyrack on lh door artno.320-0015 fitting the handyack 1 fig.2-33 fig.2-34 artno.320-0016 fitting the handyrack 2 fig.2-35 accessories oven shelves – left-hand (main) oven in addition to the flat shelves (fi...

  • Page 12

    10 main oven light press the button to turn the light on (fig.2-36). If the oven light fails, turn off the power supply before changing the bulb. See the ‘troubleshooting’ section for details on how to change the bulb. Artno.320-0017 main oven light fig.2-36.

  • Page 13

    11 tips on cooking with the timer if you want to cook more than one dish, choose dishes that require approximately the same cooking time. However, dishes can be ‘slowed down’ slightly by using small containers and covering them with aluminium foil, or ‘speeded up’ slightly by cooking smaller quantit...

  • Page 14

    12 4. Fan oven cooking table the oven control settings and cooking times given in the table below are intended to be used as a guide only. Individual tastes may require the temperature to be altered to provide a preferred result. Food is cooked at lower temperature in a fan oven than in a convention...

  • Page 15

    13 5. Cleaning your cooker isolate the electricity supply before carrying out any major cleaning. Allow the cooker to cool. Never use paint solvents, washing soda, caustic cleaners, biological powders, bleach, chlorine based bleach cleaners, coarse abrasives or salt. Do not mix different cleaning pro...

  • Page 16

    14 artno.331-0001grill pan pulled forwards fig.5-2 artno.331-0003 grill frame out, no pan artno.331-0004 removing the grill frame fig.5-3 fig.5-4 artno.331-0005 removing the grill rail fig.5-5 once you have removed as much as possible with the scraper, follow the ‘daily care’ procedure outlined abov...

  • Page 17

    15 door panel open the oven door slightly and remove the front panel fixing screws from the door sides, two each side (fig.5-7). Carefully lift off the outer door panel. The inside face of the glass panels can now be cleaned – take care not to disturb or wet the door insulation. The door is triple gla...

  • Page 18

    16 6. Troubleshooting interference with and repairs to the hob by unqualified persons are not allowed. Do not try and repair the hob as this may result in injury and damage the hob. Please arrange for repair by a competent person. Please note: the induction hob is also able to self diagnose a number ...

  • Page 19

    17 the oven is not cooking evenly if you are cooking a large item, be prepared to turn it round during cooking. If two racks are used, check that space has been left for the heat to circulate. When a baking sheet is put into the oven, make sure it is placed centrally on the rack. Check that the door...

  • Page 20

    18 7. Installation dear installer before you start your installation, please complete the details below, so that, if your customer has a problem relating to your installation, they will be able to contact you easily. Safety requirements the cooker must be installed in a well-ventilated space, in acc...

  • Page 21

    19 artno.090-0024 - 90 induction door clearances artno.090-0009 - 90 2bc cooker min spacings artno.090-0016 - 90 2bc min positions above cooker fig.7-1 fig.7-2 artno.010-0001 removing the packaging fig.7-3 fig.7...

  • Page 22

    20 lower the two rear rollers first fit the levelling tool on the hexagonal adjusting nut (fig.7-5). Make 10 complete (360º) turns clockwise (fig.7-6). (this means turning and removing the levelling tool 20 times.) make sure you lower both rear rollers. There are two adjusting nuts, one for each roll...

  • Page 23

    21 electrical connection the cooker must be installed by a qualified electrician, in accordance with all relevant british standards/codes of practice (in particular bs 7671), or with the relevant national and local regulations. Warning: the appliance must be earthed. Note: the cooker must be connecte...

  • Page 24

    Warning – servicing to be carried out only by an authorised person disconnect from electricity before servicing. Check appliance is safe when you have finished. 22 8. Servicing disconnect the cooker from the electricity supply before servicing, particularly before removing any of the following: contr...

  • Page 25

    Warning – servicing to be carried out only by an authorised person disconnect from electricity before servicing. Check appliance is safe when you have finished. 23 5. To replace the light switch disconnect from electricity supply. Remove the control panel (see 1). Note: the old switch may be destroye...

  • Page 26

    Warning – servicing to be carried out only by an authorised person disconnect from electricity before servicing. Check appliance is safe when you have finished. 24 9. To replace an oven door open the oven door. Support the door and remove the two screws securing the upper hinge and gasket to the cook...

  • Page 27

    Warning – servicing to be carried out only by an authorised person disconnect from electricity before servicing. Check appliance is safe when you have finished. 25 artno.320-0004 oven door keep fig.8-9 artno.320-0005 oven door rubber seal fig.8-10 16. To replace an oven door seal open the oven door. ...

  • Page 28

    Warning – servicing to be carried out only by an authorised person disconnect from electricity before servicing. Check appliance is safe when you have finished. 26 21. To replace an oven fan disconnect from electricity supply. Pull the cooker forward to gain access to the rear. Remove the screws secu...

  • Page 29

    27 key the connections shown in the circuit diagram are for single-phase. The ratings are for 230v 50hz. 9. Circuit diagram: oven artno.080-0032 90 induction (oven) circuit diagram 12-way connector 12-way connec...

  • Page 30

    28 circuit diagram: hob artno.080-0051 - 90 elan induction (hob) circuit diagram 8 8 8 8 8 code description a touchlit...

  • Page 31

    29 10. Technical data installer: please leave these instructions with the user. Data badge location : cooker back, serial number repeater badge below oven door opening. Connections electric 220 - 240v 50hz dimensions overall height minimum 902mm maximum 927mm overall width 900mm overall depth 650mm ...

  • Page 32

    www.Rangemaster.Co.Uk artno.000-0003 ce logo docno.000-0001 - back cover rangemaster.