Rangemaster Classic 60 Gas User Manual - page 9
7
The Clock
The two button clock can also be used as an alarm.
Setting the Clock
The LCD clock is shown in (Fig.2-17).
To set the clock press the [+] and [-] buttons
simultaneously (Fig.2-18),
then either the [+] or [-]
button to set the correct time.
Setting the Minute Minder
The clock must be set before using the minute minder.
The minute minder [ ] provides the ability to set a
countdown from 00.01h to 23.59h, at the end of which an
alarm will sound.
Press
the [+] button once.
The bell symbol [ ] will flash
on the display. Select the desired countdown from
00.01h to 23.59h using the [+] button (Fig.2-19). The
countdown will automatically begin and the [ ] symbol
will show in the display.
Once the specified time has elapsed an alarm will sound and
the [ ] symbol flashes.
To stop the alarm press any button.
Changing the frequency of the alarm
It is possible to change the alarm frequency.
Whilst the timer is showing the time of day, press and hold
the [-] button (Fig.2-20). An audible signal will sound.
To select the tone press the [-] button again, until the desired
tone is reached. After a few seconds the tone will be
saved.
ArtNo.308-0001 - 2-button clock
ArtNo.306-0001 - 3-button clock
ArtNo.306-0001 - 3-button clock
ArtNo.306-0001 - 3-button clock
Fig.2-17
Fig.2-18
Fig.2-19
Fig.2-20