Glx390 hood instructions manual www.Rangemaster.Co.Uk.
En 2 2 instructions manual index recommendations and suggestions ......................................................................................................................3 characteristics.......................................................................................................
En 3 3 recommendations and suggestions the instructions for use apply to several versions of this appliance. Accord- ingly, you may find descriptions of individual features that do not apply to your specific appliance. Installation • the manufacturer will not be held liable for any damages resulting...
En 4 4 characteristics dimensions 1270 min. 1390 - max. 1600 126 81.
En 5 5 components ref. Q.Ty product components 1 1 hood body, complete with: controls, light, blower, filters 2.1 1 upper section 2.2 1 lower section 8 1 directional air outlet grille 9 1 flange 10 1 adapting ring ø 120-125 mm 14.1 2 air outlet connection extension 15 1 air outlet connection 16 1 fi...
En 6 6 installation wall drilling and bracket fixing 7.2.1 x 1÷2 11a 11 12a 112+a a=min 250 max 400 710+a 1 2 1 2 200 200 180 180 a 7.3 on the wall, draw • a vertical line up to the ceiling or upper limit, at the centre of the area in which the hood is to be fitted; • a horizontal line at a minimum ...
En 7 7 mounting the hood body • open the ducting panels. • disconnect the panel from the hood canopy by slid- ing the fixing pin lever.(a) • remove the metal grease filters by turning the han- dles provided. • adjust the two screws vr, on brackets 11a, to a mini- mum.(b) • hook the hood canopy onto ...
En 8 8 recirculation version air outlet • insert the connection extension pieces laterally 14.1 in connec- tion 15. • insert the connector 15 into the support bracket 7.3 and fix it with a screw. • make sure that the outlet of the extension pieces 14.1 is hori- zontally and vertically aligned with t...
En 9 9 use control panel the hood can be switched on pushing directly onto the requested speed without firstly having to select 0/1 button. Key led functions l 0/1 light turns lighting on and off. T1 0/1 motoron first speed. When pressed for about 1 seconds the motor is switched off. Flashing 24h ch...
En 1 0 10 maintenance remote control (optional) the appliance can be controlled using a remote control powered by a 1.5 v carbon-zinc alkaline batteries of the standard lr03- aaa type. • do not place the remote control near to heat sources. • used batteries must be disposed of in the proper manner. ...
En 1 1 11 grease filters cleaning metal self- supporting grease filters alarm signal reset • switch off the lights and extractor motor. • press button t3 for at least 3 seconds, until the leds start to flash. Cleaning the filters • the filters are washable and must be cleaned when the led s1 lights ...
En 1 2 12 activated charcoal filter (recirculation version) the filter is not washable and cannot be regenerated. It must be replaced when led s1 flashes or at least every 4 months. The alarm signal will only light up when the extractor motor is switched on. Alarm signal activation • in recirculatio...
436004184_ver1 aga rangemaster ltd..
