Ice maker installation operation & maintenance instructions.
2 inspection remove packaging your ice maker has been packed for shipment with all parts that could be damaged by movement securely fas- tened. Before using, be sure all packing materials and tape have been removed. Important keep your carton packaging until your ice maker has been thoroughly inspec...
If you replace the fuse, the cover must be refitted. If the cover is lost, the plug must not be used until a replace- ment has been obtained from your supplier. The colour of the fuse cover is that of the insert in the base of the fuse recess or elsewhere on the plug. Always state this colour when o...
4 how to operate your ice maker •make sure water is turned on. Note: due to differing water pressures the ice maker water input may require adjustment. For this purpose an adjustment screw is on the right side of the ice maker behind the white front ice maker cover. Care will be needed to make this ...
Cleaning of the condenser: the condenser behind the air grille should be cleaned periodically or more fre- quently if severe dust conditions prevail. This will insure peak ice maker performance. To reach the condenser, remove the grille at bottom of unit by removing the screw at each end of the gril...
Before calling for service check plug and fuse. Test outlet with lamp. Be sure rocker switch is on. Read installation, operation, & maintenance instructions. Your questions may be answered. If not, find your model number on the lower section inside the door. Refer your number and problem to the serv...
7 guarantee free 1st year parts & labour guarantee covers goods for the period of 12 months from the date of purchase subject to the below exclusions. Terms and conditions the appliance- • has been correctly installed in accordance with current legis- lation, relevant british standards and codes of ...
41008457 rev. “a”.
