- DL manuals
- Rangemaster
- Hob
- RC60
- User Manual And Installation
Rangemaster RC60 User Manual And Installation
Summary of RC60
Page 1
Rc60 ceramic hob rc60ss ceramic hob user guide & installation & service instructions u109915 - 02.
Page 2
Contents before you start... 1 hob overview 3 cleaning your hob 8 troubleshooting 9 installation 10 circuit diagram 13 technical data 14 warranty/after sales service 15.
Page 3
1 thank you for buying a rangemaster hob. It should give you many years trouble-free cooking if installed and operated correctly. It is important that you read this section before you start, particularly if you have not used a ceramic hob before. This appliance is designed for domestic cooking only....
Page 4
2 hob care never cook directly on the hob surface. Do not use the hob surface as a cutting board. Do not leave utensils, foodstuffs or combustible items on the hob when it is not is use (e.G. Tea towels, frying pans containing oil). Do not place plastic or aluminium foil, or plastic containers, on th...
Page 5
3 2. Hob overview the ceramic hob comprises of four cooking zones containing heating elements with different ratings and diameters (fig.2-1), each with a residual heat indicator. Each zone is controlled via the touch sensitive controls with an audible signal when operated. The hob use only pans that ...
Page 6
4 always take care before touching the surface, even when the hob is turned off. It may be hotter than you think! Residual heat indicator, ‘h’ after use, a cooking zone will remain hot for a while as heat dissipates. When a hot cooking zone is switched off the residual heat indicator symbol, ‘h’, will...
Page 7
5 to reduce the power to a cooking zone select the required zone, as indicated by the red dot in the display. Press the ‘–‘ key to reduce the power required (fig.2-8). Note: the ‘–’ key has a repeat function: holding the key pressed down will reduce the power setting by one level every 0.3 seconds. ...
Page 8
6 timer function the timer has two settings: • zone timer • minute timer zone timer this allows each cooking zone to be set to cook up to a maximum of 99 minutes at a set power level. At the end of the cooking time the zone will turn off automatically. Activating the timer: select the required cookin...
Page 9
7 turning off the timer alarm: at the end of the cooking time the hob will beep steadily for 2 minutes. Press any key to stop the alarm. Deactivating the timer: make sure that none of the cooking zones has been selected. Press the timer and ‘–‘ keys simultaneously. The timer display will go out. Chil...
Page 10
8 cleaning burned-on spills make sure that the residual heat indicators are off and that the hob is cool. Remove the excess burned-on substance with a single-edged razor scraper. Hold the scraper at an angle of about 30° to the surface and then scrape off the burned-on matter (fig.3-1). Once you have ...
Page 11
9 if there is an installation problem and i don’t get my original installer to come back to fix it, who pays? You do. Service organisations will charge for their call- outs if they are correcting work carried out by your original installer. Therefore, it’s in your own interest to keep track of this i...
Page 12
10 installation check the appliance is electrically safe when you have finished. Dear installer before you start your installation, please complete the details below. Should your customer have a problem relating to your installation they will be able to contact you easily. Artno.050-0011 - installer ...
Page 13
11 installation check the appliance is electrically safe when you have finished. Positioning the hob the hob should be fitted into a work surface, which is at least 600mm deep. In position, it has a maximum thickness of 5mm from the top of the work surface. The cut-out dimensions are shown in (fig.5-1...
Page 14
12 installation check the appliance is electrically safe when you have finished. Electrical connections this appliance must be installed by a qualified electrician to comply with the relevant institute of electrical engineers (i.E.E.) regulations and also the local electricity supply company requireme...
Page 15: �
13 7. Circuit diagram artno.080-0015 - rg60/rgg60 circuit diagram n l a b spark generator ignition switch docno.091-0001 - circuit diagram - rg60/rgg60 gas.
Page 16
14 7. Technical data installer: please leave these instructions with the user. Data badge location: base of the hob country of destination: gb/ie dimensions height above worktop: 5mm below worktop: 40mm (60mm including connection box) overall width 580mm; see ‘positioning of the hob’ overall depth 5...
Page 17
15 8. Warranty/after sales service if consultation or technical assistance is needed, please provide the local authorised service agent with the purchase invoice and the product code/serial number. The 2 years free maintenance for the operation of the appliance started from the date of purchase of t...
Page 18
16.
Page 19
17.
Page 20
www.Rangemaster.Co.Uk artno.000-0003 ce logo docno.000-0001 - back cover rangemaster.