Rangemaster RDW1045FI User Manual & Installation & Service Instructions - page 12
10
Washing Dishes
Program overview
salt
rinse aid
end
On/Off function
salt
rinse aid
end
Program select function
salt
rinse aid
end
Time delay function
Additional options:
salt
rinse aid
end
Upper basket wash function
salt
rinse aid
end
Lower basket wash function
salt
rinse aid
end
Combination detergent tablets function
salt
rinse aid
end
Prewash function
Program Selection
The most appropriate program can be identified by
comparing the type of crockery, cutlery, etc., as well as the
amount and condition of food remains, with the details
contained in Table 2-2, the wash cycle table.
The corresponding program sequence, duration and
consumption details are shown.
Example: Use the normal program for dishes and utensils that
are heavily soiled.
Program Data
The stated program data are based on standard operating
conditions. The values can vary considerably according to:
•
Different amounts of dishes
•
Temperature of mains water supply
•
Pressure of mains water supply
•
Ambient temperature
•
Fluctuations in mains voltage
•
Machine-related factors (e.g. temperature, water
volume)
Switching the Dishwasher ON
1.
Turn on the tap.
2.
Open the door.
3.
Set ON-OFF button to ON (Fig.2-17); the program
display will light (Fig.2-18).
4.
Press the program button ‘P’; the selected program will
appear in the program display (Fig.2-18).
5.
Select any additional options.
6.
Close the door and the dishwasher will start
automatically.
End of Program
Five beeps will indicate that the wash cycle has finished and
the end of program indicator will light (Fig.2-19).
Program display
Program selection button
Fig.2-18
On/ Off button
Fig.2-17
End of program indicator
Fig.2-19