Summary of RDW459FI/SF
Page 1
Rdw459fi/sf dishwasher user guide & installation & service instructions u110143 - 01.
Page 2: Contents
Due to our policy of continual improvement, we reserve the right to change specifications without prior notice. Contents 1. Before you start 1 at time of delivery 1 during installation 1 during normal use 1 if a fault occurs 1 caring for the environment 1 2. Overview and operation 2 getting to know ...
Page 3: 1. Beforeyoustart
1 1. Beforeyoustart attimeofdelivery check packaging and dishwasher immediately for signs of transport damage. If the appliance is damaged do not use. Contact your supplier or customer services. Please dispose of packaging materials properly. Duringinstallation • site the dishwasher and connect in a...
Page 4: 2. Overviewandoperation
2 gettingtoknowyourdishwasher dishwasherinterior (fig.2-1) controlpanel (fig.2-2) 2. Overviewandoperation a upper rack b upper spray arm c cutlery basket d lower rack e control panel f lower spray arm g salt container cap h washing filter i detergent and rinse aid dispenser j water inlet hose k drai...
Page 5
3 salt the hardness of water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils. The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water. Loadingthesaltintot...
Page 6
4 artno.800-207 - dispenser - removing the rinse aid cap low rinse aid indicator rinseaid this product makes dishes sparkle and helps them to dry without spotting. The dispenser is located on the inside panel of the door. When the low rinse aid indicator on the control panel (fig.2-5) and the indica...
Page 7
5 whatyoushouldnotputintothe dishwasher cutlery and tableware manufactured in whole or part from wood. They become faded and unsightly in appearance. Furthermore the adhesives that are used are not suitable for the temperature that occurs inside the dishwasher. Delicate decorative glassware and vase...
Page 8
6 artno.800-0308 - adjusting the upper rack a b c d artno.800-0305 - knife rack arrangingcrockery,glasses,etc.Inthe dishwasher before placing the dishes in the dishwasher, remove larger food particles to prevent the filter from becoming clogged, resulting in reduced performance. If the pots and pans...
Page 9
7 on/off button on-off indicator programme indicator programme button start/reset button washingdishes programmeoverview time delay press for additional options (scroll through): upper rack wash function lower rack wash function combi detergent tablets function program select start/reset button prog...
Page 10
8 table 2-2 p ro gr ammeo ver vie w w ash pro gr amme typ esofc ro ck er y e. G. China,p ots&pa ns , cutler y, glassses ,e tc. Ty pe of food rema ining a mount of food rema ining condition of food rema ining d esc riptionofc ycle additionaloptions d et er gent rinsea id d ur ation (mins) tabs d elay...
Page 11
9 switchingthedishwasheroff several minutes after the programme has ended: 1. Open the door. 2. Set the on-off button to off. 3. Remove dishes, etc. When they have cooled down. Note: for the best drying performance, we recommend that you do not remove the contents for at least 30 minutes. This allow...
Page 12
10 toselectthe‘tablets’function: 1. Open the door. 2. Select the programme and then press the additional options button (fig.2-19) until the tablets indicator [ ] lights. 3. Press the start/reset button (fig.2-20) and close the door. The dishwasher will start immediately. Tocancelthe‘tablets’functio...
Page 13
11 delayedstartprogramming you can delay the start of a programme from 1 hour up to 24 hours. 1. Open the door, switch the dishwasher on. 2. Press programme button to choose the desired programme. 3. Press the delayed start button (fig.2-21); the time- remaining indicator changes to ‘1’. 4. Press th...
Page 14
12 low salt indicator artno.800-0501 - cleaning the filter 1 artno.800-0502 - cleaning the filter 2 care aftereverywash after every wash, set the on-off button to off and leave the door slightly ajar so that moisture and odours are not trapped inside. N n before cleaning or performing maintenance is...
Page 15
13 sprayarms limescale and remnants of food in the washing water can block the nozzles in the spray arms and the arm mountings. Inspect the nozzles in the spray arms for blocked holes due to remnants of food. If necessary, pull the lower arm (fig.3-5) upwards and lift it off. Unscrew the upper spray...
Page 16: 4. Troubleshooting
14 4. Troubleshooting resolvingminorproblemsyourself experience has shown that you can resolve most problems that occur during normal daily usage yourself, without having to call out a service engineer. Not only does this save costs but it also means that the appliance is available to use. The follo...
Page 17
15 if the dishwasher still does not function and/or the problem persists, contact the nearest authorized service centre and provide them with the following information: 1. The nature of the problem. 2. The model type number (mod...) and serial number (s/n...), as indicated on the plate located on th...
Page 18: 5. Installation
16 artno.800-0126 - fitting the sealing strip 450-550 80 positioningthedishwasher the dishwasher should be aligned to the front of the adjacent cabinets, with allowance made for the door thickness. The dishwasher has water supply and drain hoses that can be positioned on either to the left or the ri...
Page 19
17 electricalconnection the dishwasher must be installed by a qualified electrician, in accordance with all relevant british standards/codes of practice (in particular bs 7671), or with the relevant national and local regulations. N n warning: this appliance must be earthed all external wiring must ...
Page 20
18 artno.800-0106 - fitting the door b a artno.800-0111 - marking the plate position artno.800-0105 - fitting the plastic hooks fig.5-8 fig.5-9 fig.5-10 artno.800-0107 - securing the door fig.5-11 the adjustable feet allow the dishwasher to be raised up to 870 mm. If the space between the floor and ...
Page 21
19 artno.800-0114 - securing the dishwasher artno.800-0114 - securing the dishwasher worktop adjoining cabinet adjoining cabinet bracket bracket artno.800-0119 - adjusting the door springs fig.5-12 fig.5-13 fig.5-14 fig.5-15 securingthedishwasher using the two screws supplied, secure the dishwasher ...
Page 22: 6. Generalinformation
20 6. Generalinformation measures must be taken to ensure that the units that are subsequently re-sited as freestanding appliances cannot topple over. This can be achieved by bolting the dishwasher to the wall or fitting it under a continuous work surface, that is screwed to the adjacent cupboards. ...
Page 23: 7. Circuitdiagram
21 7. Circuitdiagram cnf 1 2 3 4 5 6 7 8 9 10 11 12 n l relay n l cn2 1 2 3 4 5 6 220-240 vac 50 hz b c s d e f r j m o p a q i k t h g code description a pcb b half load valve c dispenser d softer valve e inlet valve f drain pump g washing motor h capacitor for washing motor i temperature limiter j...
Page 24: 8. Technicaldata
22 8. Technicaldata installer: please leave these instructions with the user. Data badge location: inside face on the side of the door. Country of destination: gb/ie dimensions 550 450 580 446 820 - 880 725 max 820 all dimensions in mm connections electric 220 – 240v 50hz ratings energy efficiency c...
Page 25
23.
Page 26
24.
Page 27
25.
Page 28
Www.Rangemaster.Co.Uk artno.000-0003 ce logo docno.000-0001 - back cover rangemaster clarence street, royal leamington spa, warwickshire, cv31 2ad, england. Tel: +44 (0) 1926 457400 fax: +44 (0) 1926 450526 e-mail: consumers@rangemaster.Co.Uk.