Rangemaster RMHDT100SS Instruction Manual

Summary of RMHDT100SS

  • Page 1

    Rmhdt90ss/ - rmhdt100ss/ - rmhdt110ss/ instructions manual www.Rangemaster.Co.Uk.

  • Page 2: Index

    2 2 index recommendations and suggestions ..................................................................................................................... 3 characteristics .............................................................................................................................

  • Page 3

    En 3 3 recommendations and suggestions the instructions for use apply to several versions of this appliance. Accord- ingly, you may find descriptions of individual features that do not apply to your specific appliance. Installation • the manufacturer will not be held liable for any damages resulting...

  • Page 4: Characteristics

    En 4 4 characteristics dimensions components ref. Q.Ty product components 1 1 hood body, complete with: controls, light, blower, filters 2 1 telescopic chimney comprising: 2.1 1 upper section 2.2 1 lower section 8a 1 right air outlet grill 8b 1 left air outlet grill 9 1 reducer flange ø 150-120 mm 1...

  • Page 5: Installation

    En 5 5 installation wall drilling and bracket fixing wall marking: • draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. • draw a horizontal line at 650 mm above the hob. Place bracket 7.2.1 on the wal...

  • Page 6

    En 6 6 mounting the hood body • before attaching the hood body, tighten the two screws vr lo- cated on the hood body mounting points. • hook the hood body onto the screws 12a. • fully tighten the support screws 12a. • adjust the screws vr to level the hood body. 12a vr connections ducted version air...

  • Page 7

    En 7 7 electrical connection • connect the hood to the mains through a two-pole switch hav- ing a contact gap of at least 3 mm. • remove the grease filters (see paragraph maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan...

  • Page 8: Use

    En 8 8 use l v1 v2 v3 s l light switches the lighting system on and off. S led motor running led. V1 motor switches the extractor motor on and off at low speed. Used to provide a continuous and silent air change in the presence of light cooking vapours. V2 speed medium speed, suitable for most opera...

  • Page 9: Maintenance

    En 9 9 maintenance grease filters cleaning metal self- supporting grease filters • the filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a dishwasher. • remove the filters one at a time by pushing them towards the back of the g...

  • Page 12

    436001900_ver8 aga rangemaster group plc.