Ranger Hand-Held Body Scanner Owner's Manual - Specifications

Summary of Hand-Held Body Scanner

  • Page 1

    Owner’s manual important read and understand instruction booklet before using scanner. Always test scanner for proper operation before each use. R a n g e r s e c u r it y d e t e c to r s , i nc . Body sca nner met al detect or tm r a n g e r s e c u r it y d e t e c to r s , i nc . Body sca nner m...

  • Page 2: Introduction

    Introduction your ranger body scanner/metal detector is ideal for use at airports, industrial sites, government buildings, schools, hospitals, meetings, athletic events, or anywhere you need added security without undue inconvenience to anyone entering the area. It's sensitive enough to detect metal...

  • Page 3: Table Of Contents

    Table of contents a look at your ranger body scanner ...........................4 powering the body scanner/metal detector ............6 installing the battery ........................................................6 charging a nickel-cadmium battery ...............................8 operation ........

  • Page 4: Scan Area

    R a n g er se cu r i t y de te c to rs , i nc . T m body scanner/met al detect or scan area battery recharger/earphone jack sensitivity adjust a look at your body scanner 4.

  • Page 5: Visual Led Alert

    R a n g er se cu r i t y de te c to rs , i nc . T m body scanner/met al detect or visual led alert power switch de-sense-button battery compartment cover audio alert 5.

  • Page 6: Powering The Body Scanner

    Powering the body scanner installing the battery your ranger body scanner/metal detector requires one 9v battery for power. We recommend using an alkaline battery. You can also use a rechargeable nickel-cadmium battery with a proper ac adapter. Notes: • if you use a rechargeable nickel-cadmium batte...

  • Page 7

    R a n g e r s e c u r it y d e t e c to r s , in c. Follow these steps to install the battery: 1. Use a phillips screwdriver to remove the two screws that hold the battery compartment cover in place and remove the cover. 2. Carefully disconnect the old battery, if necessary, and remove it from the b...

  • Page 8

    Charging a nickel-cadmium battery you must charge a rechargeable nickel-cadmium battery before you can use it to power the security wand. To charge it in the security wand, you need an ac adapter. Ac adapters are available from ranger security. Warning: do not try to recharge alkaline or other non-r...

  • Page 9

    1.Set on/off to off and install the battery in the body scanner. 2.Insert the ac adapter's plug into the body scanner's recharger/earphone jack, on the side of the wand. 3.Plug the ac adapter's other end into a standard ac outlet. 4.Charge the battery for 14 to 16 hours. 5.Unplug the ac adapter from...

  • Page 10: Operation

    R a n g e r s e c u r it y d e t e c to r s ,i nc . Operation turning the body scanner on and off set on/off to on to turn the body scanner on, or to off to turn it off. To conserve battery life, always make sure the body scanner is off when not in use. Testing the body scanner the body scanner soun...

  • Page 11: De-Sense Is Located

    De-sense is located on top of the handle. R a n g e r s e c u r it y d e t e c to r s ,i nc . Body scanning 1.Ask the person to face you with their arms and legs slightly extended. 2.Using a smooth, even speed, begin the body scan at the upper left shoulder, holding the body scanner’s flat surface to...

  • Page 12

    The sensitivity control trimpot is located directly infront of the battery recharger/ earphone jack r a n g e r s e c u r it y d e t e c to r s ,i nc . Adjusting the body scanner’s sensitivity your body scanner is set to the optimum sensitivity level for most security screening applications. You can...

  • Page 13: Using An Earphone

    R a n g e r s e c u r it y d e t e c to r s ,i nc . Using an earphone you can use your body scanner with an earphone that has 1/8-inch plug so you can hear the alarm through the earphones. Insert the earphone’s plug into the body scanner’s recharger/earphone jack on the bottom of the wand. The exter...

  • Page 14: Maintenance

    Maintenance your ranger body scanner/metal detector is an example of superior design and craftsmanship. The following suggestions will help you care for the body scanner so you can enjoy it for years. • keep the body scanner dry. If it gets wet, wipe it dry immediately. Liquids can contain minerals ...

  • Page 15: Specifications

    Specifications operating frequency ............................................................13 khz. Weight ...................................................................................... 14 oz. Dimensions .........................................3 x 15¾ x 1⅜ inches (hwd) tuning ..............

  • Page 16

    11900 montana avenue. • el paso, texas 79936 • tel. (915) 590-4441 ranger security detectors, inc. Ranger security detectors, inc. Ranger hand-held body scanner is warranted against defects in workmanship or materials under normal use for 2 years from date of purchase to the original user. Liability...