1. DL manuals
  2. Ranger Products
  3. Lifting Systems
  4. RML-1100
  5. Installation and operation manual

Ranger Products RML-1100 Installation and operation manual

Summary of RML-1100

  • Page 1

    Installation and operation manual 1100 pound capacity motorcycle / atv lift model: rml-1100 keep this operation manual near the machine at all times. Make sure that all users read this manual . Shipping damage claims when this equipment is shipped, title passes to the purchaser upon receipt from the...

  • Page 2: Warranty Is Not Valid Unless

    1100 pound capacity motorcycle / atv lift this instruction manual has been prepared especially for you. Your new lift is the product of over 35 years of continuous research, testing and development. It is the most technically advanced lift on the market today. Read this entire manual before installa...

  • Page 3

    Important notice do not attempt to install this lift if you have never been trained on basic automotive lift installation procedures. Never attempt to lift components without proper lifting tools such as forklift or cranes. Stay clear of any moving parts that can fall and cause injury. These instruc...

  • Page 4

    Failure to follow danger, warning, and caution instructions may lead to serious personal injury or death to operator or bystander or damage to property. Please read entire manual prior to installation. Do not operate this machine until you read and understand all the dangers, warnings and cautions i...

  • Page 5: Rml-1100

    Rml-1100 instructions unpacking and set-up 1. Carefully open packaging and inspect the lift for damage. Refer to drawing on page 7. 2. Place the lift on a solid surface. 3. Assemble the handle and place the handle assembly over the lifting screw head and turn clockwise to raise lift slightly. 4. Sli...

  • Page 6

    Safe lift operation motorcycle lifts are critical to the operation and profitability of your business. The safe use of this and other lifts in your shop is critical in preventing employee injuries and damage to customer’s vehicles. By operating lifts safely you can insure that your shop is profitabl...

  • Page 7: Rml-1100

    Item # description qty item# description qty 1 platform 1 13 washer m20 4 2 bolt m12×50 2 14 outside lifting arm 1 3 washer m12 10 15 connect pin 1 4 saddle 2 16 middle bush 1 5 adjustable plate 2 17 inside frame roller 2 6 bolt m10×25 2 18 inside lifting arm 1 7 handle 1 19 bearing 2 8 lifting scre...

  • Page 8: Www.Bendpak.Com

    For parts or service contact: bendpak inc. / ranger products 1645 lemonwood dr. Santa paula, ca. 93060 tel: 1-805-933-9970 toll free: 1-800-253-2363 fax: 1-805-933-9160 www.Bendpak.Com www.Rangerproducts.Com.