1. DL manuals
  2. Ransburg
  3. Paint Sprayer
  4. 75785
  5. Service Manual

Ransburg 75785 Service Manual

Manual is about: REA-90, REA-90L

Summary of 75785

  • Page 1

    Service manual ah-94-04.7 ah-94-04.7 ah-94-04.7 ah-94-04.7 ah-94-04.7 (replaces ah-94-04.6) may - 2008 impor impor impor impor import t t t tant ant ant ant ant: before using this equipment, : before using this equipment, : before using this equipment, : before using this equipment, : before using t...

  • Page 2

    Ah-94-04.7 n o t e : n o t e : n o t e : n o t e : n o t e : this manual has been changed from revision ah-94-04.6 ah-94-04.6 ah-94-04.6 ah-94-04.6 ah-94-04.6 to revision ah-94-04.7 ah-94-04.7 ah-94-04.7 ah-94-04.7 ah-94-04.7. Reasons for this change are noted under “manual change summary” inside th...

  • Page 3

    Ah-94-04.7 safety: safety: safety: safety: safety: safety precautions............................................................................................................ Hazards / safeguards.........................................................................................................

  • Page 4

    Ah-94-04.7 parts identification: parts identification: parts identification: parts identification: parts identification: 75785 solvent base (standard) and 75979 solvent base (aviator / mgs) / model identification / parts list..............................................................................

  • Page 5

    Ah-94-04.7 rea-90 and 90l spray applicators - contents.

  • Page 6

    Ah-94-04.7 rea-90 and 90l spray applicators - safety 1 1 1 1 1 safety precautions safety precautions safety precautions safety precautions safety precautions before operating, maintaining or servicing any itw ransburg electrostatic coating system, read and understand all of the technical and safety ...

  • Page 7

    Ah-94-04.7 rea-90 and 90l spray applicators - safety 2 2 2 2 2 a r e a a r e a a r e a a r e a a r e a tells where hazards may occur. H a z a r d h a z a r d h a z a r d h a z a r d h a z a r d tells what the hazard is. S a f e g u a r d s s a f e g u a r d s s a f e g u a r d s s a f e g u a r d s ...

  • Page 8

    Ah-94-04.7 rea-90 and 90l spray applicators - safety 3 3 3 3 3 a r e a a r e a a r e a a r e a a r e a tells where hazards may occur. H a z a r d h a z a r d h a z a r d h a z a r d h a z a r d tells what the hazard is. S a f e g u a r d s s a f e g u a r d s s a f e g u a r d s s a f e g u a r d s ...

  • Page 9

    Ah-94-04.7 rea-90 and 90l spray applicators - safety a r e a a r e a a r e a a r e a a r e a tells where hazards may occur. H a z a r d h a z a r d h a z a r d h a z a r d h a z a r d tells what the hazard is. S a f e g u a r d s s a f e g u a r d s s a f e g u a r d s s a f e g u a r d s s a f e g ...

  • Page 10

    Ah-94-04.7 rea-90 and 90l spray applicators - safety 5 5 5 5 5 a r e a a r e a a r e a a r e a a r e a tells where hazards may occur. H a z a r d h a z a r d h a z a r d h a z a r d h a z a r d tells what the hazard is. S a f e g u a r d s s a f e g u a r d s s a f e g u a r d s s a f e g u a r d s ...

  • Page 11

    Ah-94-04.7 rea-90 and 90l spray applicators - safety 6 6 6 6 6 a r e a a r e a a r e a a r e a a r e a tells where hazards may occur. H a z a r d h a z a r d h a z a r d h a z a r d h a z a r d tells what the hazard is. S a f e g u a r d s s a f e g u a r d s s a f e g u a r d s s a f e g u a r d s ...

  • Page 12

    Ah-94-04.7 rea-90 and 90l spray applicators - safety 7 7 7 7 7 a r e a a r e a a r e a a r e a a r e a tells where hazards may occur. H a z a r d h a z a r d h a z a r d h a z a r d h a z a r d tells what the hazard is. S a f e g u a r d s s a f e g u a r d s s a f e g u a r d s s a f e g u a r d s ...

  • Page 13

    Ah-94-04.7 rea-90 and 90l spray applictors - atex 8 8 8 8 8 european a european a european a european a european atex directive 94/9/ec, annex ii, 1.0.6 tex directive 94/9/ec, annex ii, 1.0.6 tex directive 94/9/ec, annex ii, 1.0.6 tex directive 94/9/ec, annex ii, 1.0.6 tex directive 94/9/ec, annex i...

  • Page 14

    Ah-94-04.7 rea-90 and 90l spray applicators - atex 9 9 9 9 9 rea-90 and 90l electrostatic rea-90 and 90l electrostatic rea-90 and 90l electrostatic rea-90 and 90l electrostatic rea-90 and 90l electrostatic applicators 75785, 75786, 75979, applicators 75785, 75786, 75979, applicators 75785, 75786, 75...

  • Page 15

    Ah-94-04.7 rea-90 and 90l spray applictors - atex 1 0 1 0 1 0 1 0 1 0 label 77319 label 77319 label 77319 label 77319 label 77319 label 77319-01 label 77319-01 label 77319-01 label 77319-01 label 77319-01 label 77322 label 77322 label 77322 label 77322 label 77322 label 77325 label 77325 label 77325...

  • Page 16

    Ah-94-04.7 general description general description general description general description general description the rea process is an air-atomized method for electrostatically applying coatings to objects. The rea applicator system (technology) applies a high voltage dc charge to the applicator elect...

  • Page 17

    Ah-94-04.7 rea-90 and 90l spray applicators - introduction 1 2 1 2 1 2 1 2 1 2 rea-90 with a rea-90 with a rea-90 with a rea-90 with a rea-90 with avia via via via viat t t t tor or or or or tm tm tm tm tm the rea-90 may be used with the aviator power generator in hazardous locations. This equipment...

  • Page 18

    Ah-94-04.7 rea-90 and 90l spray applicators - introduction 1 3 1 3 1 3 1 3 1 3 specifica specifica specifica specifica specifications tions tions tions tions mechanical mechanical mechanical mechanical mechanical fluid flow fluid flow fluid flow fluid flow fluid flow capacity: capacity: capacity: ca...

  • Page 19

    Ah-94-04.7 rea-90 and 90l spray applicators - introduction 1 4 1 4 1 4 1 4 1 4 figure 1: rea-90 and rea-90l standard & aviator/mgs solventborne figure 1: rea-90 and rea-90l standard & aviator/mgs solventborne figure 1: rea-90 and rea-90l standard & aviator/mgs solventborne figure 1: rea-90 and rea-9...

  • Page 20

    Ah-94-04.7 rea-90 and 90l spray applicators - introduction 1 5 1 5 1 5 1 5 1 5 mechanical mechanical mechanical mechanical mechanical fluid flow fluid flow fluid flow fluid flow fluid flow capacity **: capacity **: capacity **: capacity **: capacity **: 1000 cc/minute operating pressure (air spray) ...

  • Page 21

    Ah-94-04.7 rea-90 and 90l spray applicators - introduction 1 6 1 6 1 6 1 6 1 6 figure 2: rea-90 and rea-90l standard & aviator waterborne figure 2: rea-90 and rea-90l standard & aviator waterborne figure 2: rea-90 and rea-90l standard & aviator waterborne figure 2: rea-90 and rea-90l standard & avia...

  • Page 22

    Ah-94-04.7 rea-90 and 90l spray applicators - installation inst inst inst inst installa alla alla alla allation tion tion tion tion 75785 st 75785 st 75785 st 75785 st 75785 standard andard andard andard andard sol sol sol sol solvent vent vent vent vent base and base and base and base and base and ...

  • Page 23

    Ah-94-04.7 rea-90 and 90l spray applicators - installation 1 8 1 8 1 8 1 8 1 8 fil fil fil fil filters ters ters ters ters 1. Install an air filter assembly on the air inlet of the control unit. Screw the fitting into the filter inlet. The filter must be installed with the arrow pointing in the dire...

  • Page 24

    Ah-94-04.7 rea-90 and 90l spray applicators - installation 1 9 1 9 1 9 1 9 1 9 location of control unit location of control unit location of control unit location of control unit location of control unit (non-a (non-a (non-a (non-a (non-avia via via via viat t t t tor units) or units) or units) or u...

  • Page 25

    Ah-94-04.7 rea-90 and 90l spray applicators - installation 2 0 2 0 2 0 2 0 2 0 isola isola isola isola isolation system tion system tion system tion system tion system inst inst inst inst installa alla alla alla allation tion tion tion tion guidelines guidelines guidelines guidelines guidelines usin...

  • Page 26

    Ah-94-04.7 rea-90 and 90l spray applicators - installation 2 1 2 1 2 1 2 1 2 1 w w w w wa a a a aterborne hose terborne hose terborne hose terborne hose terborne hose fitting inst fitting inst fitting inst fitting inst fitting installa alla alla alla allation tion tion tion tion for 75786 and 75982:...

  • Page 27

    Ah-94-04.7 rea-90 and 90l spray applicators - installation 2 2 2 2 2 2 2 2 2 2 fluid hose fitting fluid hose fitting fluid hose fitting fluid hose fitting fluid hose fitting inst inst inst inst installa alla alla alla allation tion tion tion tion (refer to figure 4) (refer to figure 4) (refer to fig...

  • Page 28

    Ah-94-04.7 rea-90 and 90l spray applicators - installation 2 3 2 3 2 3 2 3 2 3 spra spra spra spra spray y y y y technology technology technology technology technology conversion conversion conversion conversion conversion procedure procedure procedure procedure procedure > to avoid damage to the fl...

  • Page 29

    Ah-94-04.7 rea-90 and 90l spray applicators - installation 2 4 2 4 2 4 2 4 2 4 spra spra spra spra spray y y y y p p p p pa a a a attern ttern ttern ttern ttern adjustment adjustment adjustment adjustment adjustment the spray pattern of fan atomizers is adjustable from a small circle to an elongated...

  • Page 30

    Ah-94-04.7 rea-90 and 90l spray applicators - installation 2 5 2 5 2 5 2 5 2 5 4904-65r 4904-65r 4904-65r 4904-65r 4904-65r 4904-63 4904-63 4904-63 4904-63 4904-63 4904-98 4904-98 4904-98 4904-98 4904-98 air cap air cap air cap air cap air cap part # part # part # part # part # orifice id orifice id...

  • Page 31

    Ah-94-04.7 rea-90 and 90l spray applicators - installation 2 6 2 6 2 6 2 6 2 6 * material: lacquer, 18 sec. No. 4 ford cup @ 72 o f. Results are material dependent. ** air flow @ air pressure noted in next column. *** patterns at 8-inch target distance. 4907-44 4907-44 75600-01 f l u i d f l u i d f...

  • Page 32

    Ah-94-04.7 maintenance maintenance maintenance maintenance maintenance rea-90 and 90l spray applicators - maintenance 2 7 2 7 2 7 2 7 2 7 suit suit suit suit suitable sol able sol able sol able sol able solvents vents vents vents vents for cleaning for cleaning for cleaning for cleaning for cleaning...

  • Page 33

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 2 8 2 8 2 8 2 8 2 8 routine schedule routine schedule routine schedule routine schedule routine schedule follow these maintenance steps to extend the life of the applicator and ensure efficient operation. Several t several t several t several...

  • Page 34

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 2 9 2 9 2 9 2 9 2 9 for standard waterborne units: for standard waterborne units: for standard waterborne units: for standard waterborne units: for standard waterborne units: a.) kv should approach zero at contact. B.) current should increase...

  • Page 35

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 3 0 3 0 3 0 3 0 3 0 for efficient electrostatic operation, keep the applicator’s exterior and low voltage cable free of paint accumulation. This prevents the loss of voltage to ground with a resultant reduction in transfer efficiency. Paint a...

  • Page 36

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 3 1 3 1 3 1 3 1 3 1 applica applica applica applica applicat t t t tor rep or rep or rep or rep or repair air air air air all repairs should be made on a clean, flat surface. If a vise is used to hold parts during service or repair, do not cl...

  • Page 37

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 3 2 3 2 3 2 3 2 3 2 figure 5: solvent base applicator connections figure 5: solvent base applicator connections figure 5: solvent base applicator connections figure 5: solvent base applicator connections figure 5: solvent base applicator conn...

  • Page 38

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 3 3 3 3 3 3 3 3 3 3 figure 6: waterborne gun connections figure 6: waterborne gun connections figure 6: waterborne gun connections figure 6: waterborne gun connections figure 6: waterborne gun connections w w w w waterborne applicator aterbor...

  • Page 39

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 3 4 3 4 3 4 3 4 3 4 air cap air cap air cap air cap air cap (refer to figure 7) (refer to figure 7) (refer to figure 7) (refer to figure 7) (refer to figure 7) removal removal removal removal removal 1. While holding the air cap in place with...

  • Page 40

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 3 5 3 5 3 5 3 5 3 5 cleaning and inspection cleaning and inspection cleaning and inspection cleaning and inspection cleaning and inspection 1. Use a suitable solvent to clean the fluid nozzle. (refer to "suitable solvents for cleaning rea-90 ...

  • Page 41

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 3 6 3 6 3 6 3 6 3 6 needle / electrode needle / electrode needle / electrode needle / electrode needle / electrode resist resist resist resist resistance testing ance testing ance testing ance testing ance testing the electrical resistance of...

  • Page 42

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 3 7 3 7 3 7 3 7 3 7 disassembly disassembly disassembly disassembly disassembly 1. Remove the trigger adjustment nut and spring retainer from the needle shaft using two 3/8-inch open-end wrenches. 2. Position the barrel so the front is facing...

  • Page 43

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 3 8 3 8 3 8 3 8 3 8 2. Examine the plastic section of the needle shaft and the packing tube for signs of carbon tracking. Also inspect the air passages and packing chamber of the barrel for signs of scratches, additional carbon tracking, or d...

  • Page 44

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 3 9 3 9 3 9 3 9 3 9 4. Insert the needle shaft, rear section first, into the packing tube. Rotate the needle shaft while moving it back and forth inside the packing tube until fully inserted. 5. With your finger, wipe the excess grease from b...

  • Page 45

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 4 0 4 0 4 0 4 0 4 0 18. Adjust the needle shaft spring retainer until the rear of the hexagon is 11/16-inch from the rear surface of the barrel packing chamber (refer to figure 13). 19. Hold the spring retainer in place and screw the front tr...

  • Page 46

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 4 1 4 1 4 1 4 1 4 1 hook / transformer hook / transformer hook / transformer hook / transformer hook / transformer assembl assembl assembl assembl assembly y y y y removal removal removal removal removal 1. The following procedures must be pe...

  • Page 47

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 4 2 4 2 4 2 4 2 4 2 2. Remove the gasket from the handle if it did not come out with the barrel. 3. Slide the hook/transformer forward and out of the handle channel. T t t t testing and repair esting and repair esting and repair esting and re...

  • Page 48

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 4 3 4 3 4 3 4 3 4 3 8. If the led does not light, check the position of the on/off switch. It must be in the on position. If the switch is in the correct position, replace this unit (refer to “hook transformer on/off switch replacement”) and ...

  • Page 49

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 4 4 4 4 4 4 4 4 4 4 assembly assembly assembly assembly assembly 1. To get the applicator ready to be placed back into service, perform the following procedures. • install trigger stop • install air valve • install fan air screw • install hoo...

  • Page 50

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 4 5 4 5 4 5 4 5 4 5 removal removal removal removal removal (refer to figure 18) (refer to figure 18) (refer to figure 18) (refer to figure 18) (refer to figure 18) 1. Turn control knob to the open position (screwed fully out, counter-clockwi...

  • Page 51

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 4 6 4 6 4 6 4 6 4 6 air v air v air v air v air val al al al alve ve ve ve ve (refer to figure 19) (refer to figure 19) (refer to figure 19) (refer to figure 19) (refer to figure 19) removal removal removal removal removal 1. Remove the trigg...

  • Page 52

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 4 7 4 7 4 7 4 7 4 7 trigger trigger trigger trigger trigger removal removal removal removal removal (refer to figure 20) (refer to figure 20) (refer to figure 20) (refer to figure 20) (refer to figure 20) 1. Remove the two (2) shoulder screws...

  • Page 53

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 4 8 4 8 4 8 4 8 4 8 needle shaft return needle shaft return needle shaft return needle shaft return needle shaft return spring replacement spring replacement spring replacement spring replacement spring replacement removal removal removal rem...

  • Page 54

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 4 9 4 9 4 9 4 9 4 9 cleaning and inspection cleaning and inspection cleaning and inspection cleaning and inspection cleaning and inspection 1. The low voltage cable plug assembly should not be cleaned or soaked in any solvents. If the assembl...

  • Page 55

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 5 0 5 0 5 0 5 0 5 0 2. If the low voltage cable assembly has not been tested, it should be tested. (refer to "low voltage control unit test assembly" manual.) 3. The low voltage cable assembly can be wiped with a suitable solvent. Do not soak...

  • Page 56

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 5 1 5 1 5 1 5 1 5 1 5. If the fluid tube will not pull out of the fitting, it might be necessary to remove the fluid tube bracket from the gun. (refer to "fluid tube bracket" in the "maintenance" section.) 6. Remove the fluid tube, ferrule, a...

  • Page 57

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 5 2 5 2 5 2 5 2 5 2 2. Check the hose outer surface for wear or cuts and replace as necessary. Reinstall reinstall reinstall reinstall reinstall 1. To reinstall an existing or new fluid hose refer to "fluid hose - solvent base applicators" in...

  • Page 58

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 5 3 5 3 5 3 5 3 5 3 reinstall reinstall reinstall reinstall reinstall (refer to figures 23 and 24) (refer to figures 23 and 24) (refer to figures 23 and 24) (refer to figures 23 and 24) (refer to figures 23 and 24) figure 24: proper position ...

  • Page 59

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 5 4 5 4 5 4 5 4 5 4 2. Inspect the air hose for physical damage to the hose and fittings. If any is found, replace the hose assembly. Reinstall reinstall reinstall reinstall reinstall 1. Connect the air hose to the air fitting of the applicat...

  • Page 60

    Ah-94-04.7 rea-90 and 90l spray guns - maintenance 5 5 5 5 5 5 5 5 5 5 1. Actuate the trigger slowly, watching the sequence of mechanical operation. The trigger set screw should engage the air valve before the strike plate of the trigger contacts the front adjustment nut on the needle shaft assembly...

  • Page 61

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 5 6 5 6 5 6 5 6 5 6 troubleshooting guide troubleshooting guide troubleshooting guide troubleshooting guide troubleshooting guide no control of round no control of round no control of round no control of round no control of round spray patter...

  • Page 62

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 5 7 5 7 5 7 5 7 5 7 fluid fluid fluid fluid fluid (slight leak at nozzle when trigger is released) 1. Nozzle not secure 2. Air valve closing before fluid valve 1. Tighten. 2. Adjust needle shaft/electrode travel. Fluid fluid fluid fluid fluid...

  • Page 63

    Ah-94-04.7 rea-90 and 90l spray applicators - maintenance 5 8 5 8 5 8 5 8 5 8 general problem general problem general problem general problem general problem possible cause possible cause possible cause possible cause possible cause solution solution solution solution solution electrical electrical ...

  • Page 64

    Ah-94-04.7 rea-90 and 90l spray applicators - parts identification p p p p par ar ar ar arts identifica ts identifica ts identifica ts identifica ts identification tion tion tion tion figure 26a: 75785 solvent base (standard) and 75979 solvent base (aviator/mgs) figure 26a: 75785 solvent base (stand...

  • Page 65

    Ah-94-04.7 rea-90 and 90l spray applicators - parts identification 6 0 6 0 6 0 6 0 6 0 75785 sol 75785 sol 75785 sol 75785 sol 75785 solvent vent vent vent vent base rea-90 st base rea-90 st base rea-90 st base rea-90 st base rea-90 standard andard andard andard andard model model model model model ...

  • Page 66

    Ah-94-04.7 rea-90 and 90l spray applicators - parts identification 6 1 6 1 6 1 6 1 6 1 see "parts list bullet definition table". Rea-90 delta applicator (air spray) complete assembly rea-90 delta applicator (air spray) complete assembly rea-90 delta applicator (air spray) complete assembly rea-90 de...

  • Page 67

    Ah-94-04.7 rea-90 and 90l spray guns - parts identification 6 2 6 2 6 2 6 2 6 2 see "parts list bullet definition table" on page 62. (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) 30 3 rod assembly, air valve 79310-00 31 s...

  • Page 68

    Ah-94-04.7 rea-90 and 90l spray applicators - parts identification 6 3 6 3 6 3 6 3 6 3 77 1 low voltage cable assembly: low voltage cable assembly: low voltage cable assembly: low voltage cable assembly: low voltage cable assembly: for standard 9040 / mgs 78084-xx * for aviator - all units 78085-xx ...

  • Page 69

    Ah-94-04.7 rea-90 and 90l spray applicators - parts identification 6 4 6 4 6 4 6 4 6 4 n o t e s n o t e s n o t e s n o t e s n o t e s.

  • Page 70

    Ah-94-04.7 rea-90 and 90l spray applicators - parts identification 6 5 6 5 6 5 6 5 6 5 figure 26b: 75786 waterborne (standard) and 75982 waterborne (aviator) figure 26b: 75786 waterborne (standard) and 75982 waterborne (aviator) figure 26b: 75786 waterborne (standard) and 75982 waterborne (aviator) ...

  • Page 71

    Ah-94-04.7 rea-90 and 90l spray applicators - parts identification 6 6 6 6 6 6 6 6 6 6 36 - 36 ft. 3/16" id fluid hose and hv cable 37 - 36 ft. 1/4" id fluid hose and hv cable 50 - 50 ft. 3/16" id fluid hose and hv cable 51 - 50 ft. 1/4" id fluid hose and hv cable 75 - 75 ft. 3/16" id fluid hose and...

  • Page 72

    Ah-94-04.7 rea-90 and 90l spray applicators - parts identification 6 7 6 7 6 7 6 7 6 7 see "parts list bullet definition table". Rea-90 delta applicator (air spray) complete assembly rea-90 delta applicator (air spray) complete assembly rea-90 delta applicator (air spray) complete assembly rea-90 de...

  • Page 73

    Ah-94-04.7 rea-90 and 90l spray applicators - parts identification 6 8 6 8 6 8 6 8 6 8 see "parts list bullet definition table". (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) 31 spring, compression 17130-00 32 -----------...

  • Page 74

    Ah-94-04.7 rea-90 and 90l spray applicators - parts identification 6 9 6 9 6 9 6 9 6 9 * xx = specify length when ordering. 1 dash number (-xx) reads in feet (example: -36 = 36 feet). These items are available in standard lengths of 36, 50, 75, and 100 feet. When ordering cable 76876-xx and 76878-xx...

  • Page 75

    Ah-94-04.7 rea-90 and 90l spray applicators - parts identification 7 0 7 0 7 0 7 0 7 0 accessories loctite, medium strength 7969-00 dielectric grease lsch0009-00 special multi-purpose applicator wrench 19749-00 push pull fan control, air spray 72118-00 disposable applicator cover gc-100-k5 item # it...

  • Page 76

    Ah-94-04.7 rea-90 and 90l spray applicators - warranty policies 7 1 7 1 7 1 7 1 7 1 w w w w warranty arranty arranty arranty arranty policies policies policies policies policies limited w limited w limited w limited w limited warranty arranty arranty arranty arranty itw ransburg will replace or repa...

  • Page 77

    Ah-94-04.7 manual manual manual manual manual change summar change summar change summar change summar change summary y y y y this manual was published to supercede service manual ah-94-04.6 rea-90 and 90l spray ah-94-04.6 rea-90 and 90l spray ah-94-04.6 rea-90 and 90l spray ah-94-04.6 rea-90 and 90l...

  • Page 78

    Service manual price: service manual price: service manual price: service manual price: service manual price: €25.00 (euro) 25.00 (euro) 25.00 (euro) 25.00 (euro) 25.00 (euro) $30.00 (u.S.) $30.00 (u.S.) $30.00 (u.S.) $30.00 (u.S.) $30.00 (u.S.) form no. Ah-94-04.7 litho in u.S.A. 05/08 © 2008 illin...