Ransomes HR 9016 Turbo 70526 Parts & Maintenance Manual - Hr-9016

Summary of HR 9016 Turbo 70526

  • Page 1

    Parts & maintenance manual 19 17 18 13 6 5 9 15 16 7 8 10 4 3 11 1 - includes items 3 - 16 gb hr 9016 turbo ™ rotary mower 70526 – detroit diesel d704lt, 4wd 70527 – detroit diesel d704lt, 4wd with rops 2812171-rev a.

  • Page 2: To Order Parts

    Copyright 2000 textron inc. “all rights reserved, including the right to reproduce this material or portions thereof in any form.” to order parts 1. Write your full name and complete address on the order. 2. Explain where and how to make shipment. 3. Give product number, name and serial number that ...

  • Page 3: Suggested Stocking Guide

    3 suggested stocking guide to keep your equipment fully operational and productive, maintain a stock of the more commonly used maintenance items. We have included part numbers for additional support materials and training aids. A more complete listing of accessories and attachments can be found in t...

  • Page 4: Warning

    1 safety 4 1 safety 1.1 operating safety ______________________________________________________ 1. Safety is dependent upon the awareness, concern and prudence of those who operate or service the equipment. Never allow minors to operate any equipment. 2. It is your responsibility to read this manual...

  • Page 5: Warning

    Safety 1 5 1.2 important safety notes ________________________________________________ this safety alert symbol is used to alert you to potential hazards. Danger - indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Warning - indicates a potenti...

  • Page 6

    2 specifications 6 2 specifi cati ons 2.1 product identification _________________________________________________ 70526 .............................. Hr 9016 turbo, 4 wheel drive 70527 .............................. Hr 9016 turbo, 4 wheel drive with rops serial number ................ An identific...

  • Page 7: Caution

    Specifications 2 7 2.4 weights and dimensions ________________________________________________ dimensions: inches (mm) length - front deck down.............................. 174 (4420) height - top of steering wheel ...................... 60 (1524) height - top of rops..................................

  • Page 8: Warning

    3 adjustments 8 3 adjustments 3.1 general________________________________________________________________ 1. Adjustments and maintenance should always be performed by a qualified technician. If proper adjustment cannot be made, contact an authorized textron turf care and specialty products dealer. 2...

  • Page 9: Caution

    Adjustments 3 9 3.3 servicing front deck___________________________________________________ the front deck can be raised and tilted up to improve access to the cutting unit and blades for service and cleaning. Be sure to disengage all drives, engage parking brake, stop engine and remove ignition key...

  • Page 10: Warning

    3 adjustments 10 3.5 cutting height _________________________________________________________ cutting height for decks can be adjusted from 1 to 5-1/2 in. (25-125 mm) in 1/2 in. (13 mm) increments. Actual cutting height may vary somewhat from the heights given depending on turf conditions and other ...

  • Page 11

    Adjustments 3 11 3.6 parking brake _________________________________________________________ the brake switch is part of the operator back-up system and senses when the parking brake is engaged. If this switch fails the machine may not start and the operator back-up system will not operate correctly...

  • Page 12

    3 adjustments 12 3.8 neutral sensing switch ________________________________________________ the neutral sensing switch is part of the operator backup system. It is designed to prevent the tractor from starting unless the traction pedal is in neutral. If this switch fails or is out of adjustment the...

  • Page 13

    Adjustments 3 13 3.10 lift limit switches _____________________________________________________ the rotation of the cutting blades is controlled by limit switches positioned on the tractor frame near the lift arms for each deck. When a deck is raised the switch opens and automatically disengages the...

  • Page 14

    3 adjustments 14 3.11 traction pedal _________________________________________________________ the traction pedal must be adjusted so the pump is at full stroke when the pedal is fully depressed in the forward position. 1. Make sure return arm (k-figure 3h) on pump is adjusted to neutral, section 3....

  • Page 15: Caution

    Adjustments 3 15 3.14 torque specification ___________________________________________________ textron turf care and specialty products uses grade 5 plated bolts as standard, unless otherwise noted. For tightening plated bolts, use the value given for lubricated. Caution all torque values included i...

  • Page 16: Warning

    4 maintenance 16 4 maintenance 4.1 general________________________________________________________________ 1. Adjustment and maintenance should always be performed by a qualified technician. If proper adjustments cannot be made, contact an authorized textron turf care and specialty products dealer. ...

  • Page 17: Warning

    Maintenance 4 17 4.3 sharpening blades _____________________________________________________ 1. Place a wooden block between the blade and mower housing to stop the blade from moving. To remove blade, turn screw holding blade counterclockwise . 2. When dressing or sharpening the blade, do not follow...

  • Page 18: Warning

    4 maintenance 18 4.4 engine _________________________________________________________________ important: a separate engine manual, prepared by the engine manufacturer, is supplied with this tractor . Read the engine manual carefully until you are familiar with the operation and maintenance of the en...

  • Page 19: Warning

    Maintenance 4 19 4.7 air filter _______________________________________________________________ check the service indicator daily. Replace air cleaner element immediately when red band becomes visible (a) do not remove the element for inspection or cleaning. Unnecessary removal of the filter increas...

  • Page 20: Caution

    4 maintenance 20 4.9 fuel system ____________________________________________________________ refer to section 4.23 for specific maintenance intervals. See engine manual for detailed procedures. Before replacing any filter, thoroughly clean the filter housing and the area around the filter. Dirt mus...

  • Page 21: Warning

    Maintenance 4 21 4.12 charging battery _____________________________________________________ 1. Refer to section 4.10. Read the battery and charger’s manual for specific instructions. 2. Whenever possible, remove the battery from the tractor before charging. If battery is not sealed, check that the ...

  • Page 22

    4 maintenance 22 4.14 hydraulic oil __________________________________________________________ refer to section for specific maintenance intervals. Drain and replace the hydraulic oil if you notice the presence of water or foam in the oil, a rancid odor (indicating excessive heat), or after a major ...

  • Page 23: Warning

    Maintenance 4 23 4.16 radiator & oil cooler __________________________________________________ check coolant level daily. Radiator should be full and recovery bottle should be up to the cold mark. If you have to add coolant more than once a month, or add more than one quart at a time, have a textron...

  • Page 24: Caution

    4 maintenance 24 4.17 care and cleaning _____________________________________________________ wash the tractor and implements after each use. Keep the equipment clean. Note: do not wash any portion of the equipment while it is hot. Do not use high pressure spray or steam. Use cold water and automoti...

  • Page 25

    Maintenance 4 25 always check operator back-up system after servicing the electrical system! Relay description function kya / k2 key switch “a” holds fuel stop solenoid valve open when ignition switch is in the run position and opera- tor is seated. Activates glow plug timer if engine isn’t running....

  • Page 26: Caution

    4 maintenance 26 4.19 tires ___________________________________________________________________ 1. Keep tires properly inflated to prolong tire life. Check inflation pressure while the tires are cool. Inspect tread wear. 2. Check pressure yearly. Use an accurate, low pressure tire gauge. 3. Keep tir...

  • Page 27: Caution

    Maintenance 4 27 4.21 rollover protection structure (rops) ________________________________ a rollover protection system (rops), designed for this tractor, is available as an optional accessory. If your tractor is equipped with this device, inspect it periodically and follow operating procedures des...

  • Page 28: Warning

    4 maintenance 28 4.23 maintenance chart ____________________________________________________ for smooth operation of pivot points and other friction points, apply several drops of sae 30 oil every 50 hours or as required. Remove wheels and repack bearings once a year. A - add or adjust c - clean i -...

  • Page 29

    Maintenance 4 29 4.24 lubrication chart______________________________________________________ 1 2 2 4 3 4 4 6 13 14 7 7 1 1 grease fitting locations f1 - 50 hours (every week) qty 1 caster spindles (10) 2 caster wheel axles (10) 3 gauge wheel axles (2) 4 lift cylinder - front deck (4) 5 lift arm - f...

  • Page 30

    5 troubleshooting 30 5 tro ubleshoo ting 5.1 general________________________________________________________________ the troubleshooting chart below lists basic problems that may occur during start-up and operation. For more detailed information regarding the hydraulic and electrical systems contact...

  • Page 31

    Parts list 6 31 6 parts list 6.1 table of contents______________________________________________________ body 1.1 ....... Decals-tractor ............................................ 32 2.1 ....... Hood ........................................................... 34 3.1 ....... Cowlings and skirts ......

  • Page 32: Hr-9016

    32 hr 9016 turbo 4wd 1) read opera t o rs manu al. Do no t allo w untrained opera t ors t o use this ma chine. 2) keep shields in pla ce and hard w are securel y f astened . 3) before y ou clean, adjust , or rep air this eq uipment , disenga g e all drives , enga ge p arking brake and st op engine. ...

  • Page 33: Hr-9016

    33 > change from previous revision to avoid injury when working with battery 1. Always connect the black ground (–) cable last and remove it first. 2. Keep sparks and flames away, and avoid contatc with acid. To avoid injury when jumping battery 1. Connect positive (+) terminal to positive (+) termi...

  • Page 34: Hr-9016

    34 hr-9016 2.1 hood serial no. All 9016-21 1 2 3 4 5 6 7 8 9 10 12 13 14 15 16 17 18 19 20 7 7 7 8 8 8 7 16 17 11 11 21 21.

  • Page 35: Hr-9016

    35 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 2812029 1 hood 2 1003679 1 pivot, hood 3 3006644 2 pin, special clevis 4 460028 2 cotter pin, 1/8 x 1” 5 440120 4 carriage bolt, 3/8-16 x 1-1/4” 6 452008 4 flat washer, 3/8 7 446142 14 lockwasher, 3/8 he...

  • Page 36: Hr-9016

    36 a b c a b c hr-9016 3.1 cowlings and skirts serial no. All 9016-24 1 2 3 / 4 5 6 7 8 9 10 11 12 / 13 14 / 15 16 17 18 2 5 5 6 6 7 7 8 8 9 11 16 17 1 9 11 17.

  • Page 37: Hr-9016

    37 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 447414 8 lockwasher, 3/8 external tooth 2 404118 8 screw, 3/8-16 x 7/8” truss head 3 3006663 1 left side cowling 4 3006664 1 right side cowling 5 352604 6 grommet 6 3005604 8 receptacle, #85 1/4 turn 7 3...

  • Page 38: Hr-9016

    38 hr-9016 4.1 seat pan and heat shield serial no. All 9016-25 1 2 3 4 5 6 7 8 9 10 11 12 13 2 4 5 5 10 11 14 15 15 16 17 17 16.

  • Page 39: Hr-9016

    39 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 3007032 1 seat pan 2 400264 4 screw, 3/8-16 x 1-1/4” hex head 3 443110 2 nut, 3/8-16 hex 4 446142 4 lockwasher, 3/8 heavy 5 452008 6 flat washer, 3/8 6 5003457 1 plate, floorboard 7 404118 4 screw, 3/8-1...

  • Page 40: Hr-9016

    40 hr-9016 controls 5.1 instrument panel serial no. 70526 1601 ~ 1685 9016-01 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 4 38 39 39 hr 9016 units with indak keyswitch part no. 1001958 serial number 70526 1651 ~ 1661 your machine was built be...

  • Page 41: Hr-9016

    41 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 5003768 1 dash panel with decal serial number 70526 1601 ~ 1661 1 4103860 1 dash panel with decal serial number 70526 1662 ~ 1685 2 403920 4 screw, #10-24 x 2-1/2” truss head 3 366283 1 handle 4 3006446 ...

  • Page 42: Hr-9016

    42 hr-9016 controls 5.2 instrument panel serial no. 70526 1686 and up serial no. 70527 1601 and up 9016-01 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 4 38 39 39.

  • Page 43: Hr-9016

    43 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes > 1 4116910 1 panel, dash 2 403920 4 screw, #10-24 x 2-1/2” truss head 3 366283 1 handle 4 3006446 2 switch, test / 4wd-reverse > 5 2721505 1 switch, pto > 6 3006436 1 4wd switch 7 3006509 2 hole plug > 8 ...

  • Page 44: Hr-9016

    44 screw as part of engine hr-9016 6.1 throttle cable serial no. All 9016-15 part of item 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 31 32 33 3 5 9 9 11 19 19 20 20 20 24 24 26 7 9 24 8 19 20 19 19 20 34 19 9 part of engine 19 20 36 35.

  • Page 45: Hr-9016

    45 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 5003425 1 control panel 2 1004252 1 throttle cable 3 558021 2 • clip, conduit 4 303962 1 • wire stop 5 558020 1 • swivel 6 3006730 1 lever, throttle 7 400116 2 screw, 1/4-20 x 1-1/2” hex head 8 400110 3 ...

  • Page 46: Hr-9016

    46 hr-9016 7.1 lift valve and controls serial no. All 9016-14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 6 7 6 7 11 5 13 20 21 4.

  • Page 47: Hr-9016

    47 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 340061 1 adapter, 90° 2 1003611 1 tube, lift valve to backpressure 3 3006737 1 hinge, control panel 4 404022 3 screw, 1/4-20 x 1” truss head 5 453023 5 flat washer, 1/4 6 446128 7 lockwasher, 1/4 7 44310...

  • Page 48: Hr-9016

    48 hr-9016 8.1 accelerator pedal serial no. All 9016-08 1 28 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 2 29 30 31 32 33 34 35 36 37 4 6 7 9 10 18 39 24 16 16 4 2 16 16 10 15 15 16 15 38 38 38 38.

  • Page 49: Hr-9016

    49 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 1003244 1 arm, hydro pedal 471214 1 • grease fitting (not shown) 2 3010305 2 • bushing 3 1003071 1 shaft 4 400190 4 screw, 5/16-18 x 1-1/4” hex head 5 453009 1 flat washer, 5/16 6 446134 3 lockwasher, 5/...

  • Page 50: Hr-9016

    50 hr-9016 9.1 steering assist serial no. All 9016-04 1 2 3 4 5 6 7 8 9 / 10 11 12 13 14 15 16 17 18 19 20 21 22 23 2 15 5 6 8 12 24.

  • Page 51: Hr-9016

    51 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 1003794 2 steering assist pedal 471214 1 • grease fitting (not shown) 2 3010305 4 • bushing 3 1003245 1 shaft 4 452006 1 flat washer, 5/16 5 446134 3 lockwasher, 5/16 6 443106 3 nut, 5/16-18hex 7 3006107...

  • Page 52: Hr-9016

    52 hr-9016 10.1 parking brake serial no. All 9016-03 1 2 4 3 6 7 8 9 10 11 12 13 14 15 16 23 18 19 5 6 11 12 20 21 22 11 12 17.

  • Page 53: Hr-9016

    53 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 1003838 1 parking brake lever 2 n/s 2 • stabilizer bar 3 545234 2 • clevis pin 4 460004 2 • cotter pin 5 545237 2 • spacer 6 3006108 2 cable, parking brake 7 3008548 1 mount, brake lever 8 3008874 1 plat...

  • Page 54: Hr-9016

    54 hr-9016 fram e 11.1 frame serial no. 70526 all 9016-02 1 2 3 4 5 7 6 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 25 22 10 24 26 27 28 29 30 31 28 7 6 32 33 34 34 10 23 11 12.

  • Page 55: Hr-9016

    55 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 5003272 1 frame 2 1002889 1 cross frame 3 1002895 1 cylinder mount, right 4 1002896 1 cylinder mount, left 5 400416 4 screw, 1/2-13 x 2-1/2” hex head 6 446154 6 lockwasher, 1/2 heavy 7 443118 6 nut, 1/2-...

  • Page 56: Hr-9016

    56 hr-9016 12.1 frame with rops serial no. 70527 all 9016-02 1 2 3 4 5 7 6 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 25 22 10 24 26 27 28 29 30 31 28 7 6 32 33 p/o 34 34 10 23 11 12.

  • Page 57: Hr-9016

    57 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 5003272 1 frame 2 1002889 1 cross frame 3 1002895 1 cylinder mount, right 4 1002896 1 cylinder mount, left 5 400416 4 screw, 1/2-13 x 2-1/2” hex head 6 446154 6 lockwasher, 1/2 heavy 7 443118 6 nut, 1/2-...

  • Page 58: Hr-9016

    58 hr-9016 13.1 steering axle serial no. All 9016-38 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 2 2 2 4 7 9 10 11 12 12 12 20 20 21 22 23 24 17 17 17.

  • Page 59: Hr-9016

    59 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 5003540 2 wheel motor see 49.1 2 460030 4 cotter pin, 1/8 x 1-1/4” 3 443842 1 nut, 1-1/8 -12 hex jam 4 401208 8 screw, 1/2-13 x 1-3/4” grade 8 5 5003530 1 frame, rh wheel motor 6 5003529 1 frame, lh whee...

  • Page 60: Hr-9016

    60 > change from previous revision hr-9016 14.1 steering axle installation serial no. All 9016-36 item part no. Qty. Description serial numbers/notes 1 – 1 steering axle see 13.1 2 1003001 1 pivot shaft 3 3006475 ar washer, 3/32” thick thrust 4 363766 1 washer 5 445642 1 nut, 1-1/2 -12 slotted hex 6...

  • Page 61: Hr-9016

    61 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 5003622 1 battery tray includes decals 2 400264 4 screw, 3/8-16 x 1-1/4” hex head 3 446142 4 lockwasher, 3/8 heavy 4 452008 6 flat washer, 3/8 5 n/s 2 battery, 12 volt group 75dt 6 3008461 5 angle, batte...

  • Page 62: Hr-9016

    62 hr-9016 16.1 tilt steering serial no. All 9016-17 1 2 3 4 5 7 9 8 6 10 11 12 13 14 15 16 17 18 19 20 21 4 11 11 23 22 24 25.

  • Page 63: Hr-9016

    63 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 5002918 1 actuator, gas spring 2 5002919 1 cable, actuator 3 2811346 1 tower, steering 4 1002800 1 pump, steering see 45.1 339979 5 • adapter, straight 5 2811364 1 steering wheel 6 2811365 1 • cap, steer...

  • Page 64: Hr-9016

    64 hr-9016 17.1 oil cooler serial no. All 9016-13 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 20 21 22 23 24 25 26 27 28 29 30 31 32 2 6 35 8 7 13 15 34 18 28 30 33 35 19.

  • Page 65: Hr-9016

    65 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 1002952 1 oil cooler 2 3004113 2 bushing 3 2810633 1 plate, cap mounting 4 3007011 1 bracket, cooler pivot 5 400270 2 screw, 3/8-16 x 2” hex head 6 452008 4 flat washer, 3/8 7 446142 3 lockwasher, 3/8 he...

  • Page 66: Hr-9016

    66 a a b hr-9016 engi ne and radi ator 18.1 radiator serial no. All 9016-12 1 2 3 4 5 6 9 8 7 10 11 12 13 14 15 16 17 18 19 20 22 23 22 3 4 6 8 8 10 10 10 15 4 4 6 6 17 12 23 22 b – to top engine bleed port 20 21 24.

  • Page 67: Hr-9016

    67 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 5003355 1 radiator firewall 2 1002953 1 radiator 555867 1 • radiator cap 3 400258 12 screw, 3/8-16 x 3/4” hex head 4 446142 22 lockwasher, 3/8 heavy 5 3006427 1 radiator fan shroud 6 452008 18 flat washe...

  • Page 68: Hr-9016

    68 to intake tube on radiator tower mounts to stud on engine exhaust manifold 1 2 3 4 5 6 7 8 9 10 12 11 13 14 15 16 5 18 19 20 21 22 23 24 25 26 28 29 9 25 25 25 25 6 25 6 15 15 33 15 6 16 27 13 30 31 32 17 15 16 hr-9016 19.1 air cleaner and muffler serial no. All 9016-16.

  • Page 69: Hr-9016

    69 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 1004417 1 air cleaner 5003370 1 • filter element 5003372 1 • cover 5003373 1 • valve 2 3009505 1 clamp, air cleaner mounting 3 3010182 1 heat shield, muffler 4 3010340 1 tab, heat shield 5 400186 4 screw...

  • Page 70: Hr-9016

    70 hr-9016 20.1 engine mounting serial no. All 9016-11 1 2 3 4 / 17 5 6 7 8 9 12 13 10 14 15 16 17 18 19 20 7 7 8 8 13 11 11 12 12 14 16 18 19 20 15 21 22 23 24 25.

  • Page 71: Hr-9016

    71 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 – 1 engine and pump assembly see 21.1 2 3007671 1 fan mounting hardware part of engine 3 3008821 1 temperature sender 4 400420 1 screw, 1/2-13 x 3-1/2” hex head front right engine mount only 5 3006526 1 ...

  • Page 72: Hr-9016

    72 part of engine hr-9016 21.1 engine and pump assembly serial no. All 9016-10 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 3 14.

  • Page 73: Hr-9016

    73 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 ref 1 engine, ddc d704lt 5003207 1 • engine oil filter 5003208 1 • oil cooler hose 5003209 1 • thermostat housing 5003210 1 • fuel line (fuel pump to filter) 5003211 1 • fan belt 5003212 1 • fuel filter ...

  • Page 74: Hr-9016

    74 hr-9016 tanks 22.1 tank mounting serial no. All 9016-18 1 2 3 4 5 6 7 8 13 14 15 16 17 18 19 20 4 5 7 8 11 11 11 11 32 32 32 14 14 14 14 14 14 15 15 15 14 32 21 22 23 24 25 26 27 28 29 30 31 32 9 /10 12 14 11 15 19 33 34 35 36 38 37.

  • Page 75: Hr-9016

    75 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 – 1 tank, hydraulic oil see 23.1 2 3008808 1 cap, breather filler 3 3009203 1 sensor, oil level 4 441689 4 carriage bolt, 1/2-13 x 8-1/2” 5 3009236 2 wall, fender 6 3008219 1 bracket, hose retainer 7 452...

  • Page 76: Hr-9016

    76 > change from previous revision hr-9016 23.1 hydraulic tank serial no. All 9016-19 item part no. Qty. Description serial numbers/notes 1 3006264 1 tank, hydraulic oil 2 3006566 2 strainer 339904 2 • o-ring sae -32 3 3006847 1 fitting, beaded 339904 1 • o-ring sae -32 4 3002397 1 plug, magnetic 5 ...

  • Page 77: Hr-9016

    77 > change from previous revision a b a - connects to fuel injection pump return port b - connects to fuel pump inlet 1 2 3 4 5 6 8 9 10 12 11 13 14 15 16 17 2 4 5 7 6 9 7 hr-9016 item part no. Qty. Description serial numbers/notes 1 3006265 1 tank, fuel 2 361117 3 bushing 3 132647 1 fuel shutoff 4...

  • Page 78: Hr-9016

    78 > change from previous revision hr-9016 traction pum p 25.1 pump and 4wd valve mounting serial no. All 9016-06 item part no. Qty. Description serial numbers/notes 1 – 1 pump assembly see 26.1 2 1002977 1 4wd valve with oil shuttle see 55.1 3 400406 4 screw, 1/2-13 x 1-1/4” hex head 4 446154 6 loc...

  • Page 79: Hr-9016

    79 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 1002927 1 pump, traction 5003034 1 • seal kit 5003432 1 • control kit 5003433 1 • shaft seal kit 5003544 1 • system relief kit 2 1003248 1 pump, double 5003165 1 • seal kit, front section 5003166 1 • sea...

  • Page 80: Hr-9016

    80 hr-9016 lift ar ms and deck valves 27.1 front lift arms and cylinders serial no. All 9016-09 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 23 24 25 3 5 8 8 8 8 9 10 10 10 10 11 11 11 11 15 21 26 27 28 29 30 31 33 33 34 32 35.

  • Page 81: Hr-9016

    81 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 1002785 1 r.H. Front lift arm 2 1003900 1 l.H. Front lift arm 3 342033 4 • bushing 4 471214 2 • grease fitting 5 3006490 4 bracket, front deck pivot 6 3007091 1 angle, r.H. Valve mount 7 3007092 1 angle,...

  • Page 82: Hr-9016

    82 hr-9016 28.1 front deck latch serial no. All 9016-05 1 2 3 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 4 6 8 11 2 16 16 17 17 27 27 4 28 29 30 31.

  • Page 83: Hr-9016

    83 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 1003483 1 brace, stand up 2 365826 2 spacer 3 400430 1 screw, 1/2-13 x 5-1/2” hex head 4 1003277 2 pin, cylinder rod end 5 446154 1 lockwasher, 1/2 heavy 6 443118 3 nut, 1/2-13 hex 7 1003484 1 latch, fro...

  • Page 84: Hr-9016

    84 hr-9016 29.1 side lift arms serial no. All 9016-28 1 / 2 3 4 5 6 7 8 9 10 11 12 13 / 14 15 16 38 39 20 21 / 22 23 / 24 25 26 27 28 29 30 31 32 33 34 35 36 4 5 8 9 9 10 10 12 18 15 19 19 19 29 34 37 34 16 17 40 42 41 43.

  • Page 85: Hr-9016

    85 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 1005016 1 pivot, left side arm 2 1005017 1 pivot, right side arm 3 304569 4 • bushing 4 332351 4 • bushing 5 471214 6 • grease fitting 6 3006294 2 plate, side arm pivot 7 3006295 2 plate, side arm pivot ...

  • Page 86: Hr-9016

    86 hr-9016 30.1 side lift cylinders and return canisters serial no. All 9016-29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 7 8 10 14 12 13 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36.

  • Page 87: Hr-9016

    87 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 5003371 2 canister, deck return see 50.1 2 1003823 2 pin, canister mount 3 400266 2 screw, 3/8-16 x 1-1/2” hex head 4 446140 2 lockwasher, 3/8 5 443110 4 nut, 3/8-16 hex 6 3009535 2 pin, shear 7 458039 4...

  • Page 88: Hr-9016

    88 > change from previous revision hr-9016 31.1 front deck valves serial no. All 9016-22 item part no. Qty. Description serial numbers/notes 1 1004337 2 valve, deck see 54.1 2 339989 4 adapter, straight 3 441624 1 carriage bolt, 3/8-16 x 1” 4 340070 4 adapter, 90° 5 340065 2 adapter, 90° 6 364945 2 ...

  • Page 89: Hr-9016

    89 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 1004337 2 valve, deck see 54.1 2 339989 2 adapter, straight 3 340070 6 adapter, 90° 4 363030 2 cover, dust 5 365466 2 fitting, diagnostic 6 401028 4 screw, 3/8-16 x 3-1/4” hex head 7 452008 4 flat washer...

  • Page 90: Hr-9016

    90 > change from previous revision hr-9016 hydraul ics and electr ical 33.1 side deck valve supply serial no. All 9016-31 item part no. Qty. Description serial numbers/notes 1 400264 4 screw, 3/8-16 x 1-1/4” hex head 2 446142 4 lockwasher, 3/8 heavy 3 443110 4 nut, 3/8-16 hex 4 3008423 1 plate, righ...

  • Page 91: Hr-9016

    91 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 400264 1 screw, 3/8-16 x 1-1/4” hex head 2 446142 1 lockwasher, 3/8 heavy 3 443110 1 nut, 3/8-16 hex 4 452008 1 flat washer, 3/8 5 3008474 1 clamp, tube 6 365660 1 grommet 7 2811968 1 hose, pump to right...

  • Page 92: Hr-9016

    92 > change from previous revision hr-9016 35.1 pump supply serial no. All 9016-30 item part no. Qty. Description serial numbers/notes 1 3007778 1 tube, rear pump suction 2 162236 2 clamp 3 3007775 2 hose, rear pump inlet 4 1003610 1 manifold, rear pump suction 5 3007779 2 hose, rear pump suction 6 ...

  • Page 93: Hr-9016

    93 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 1003891 1 return manifold 2 400266 2 screw, 3/8-16 x 1-1/2” hex head 3 452008 2 flat washer, 3/8 4 446140 2 lockwasher, 3/8 5 3007061 1 hose, return 6 3008820 1 clamp, double hose 7 359615 2 clamp, hose ...

  • Page 94: Hr-9016

    94 a b 1 2 t 3 4 to port 1 4wd valve to port 2 4wd valve to port 3 4wd valve to port 4 4wd valve to port a 4wd valve to port b 4wd valve to bottom port right rear wheel motor to top port left rear wheel motor to top port right rear wheel motor to bottom port left rear wheel motor left side 4wd valve...

  • Page 95: Hr-9016

    95 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 1002769 2 wheel motor, front 5003641 1 • brake shoe kit 5003642 1 • mechanical control kit 5003643 1 • adjusting system kit 5003651 1 • motor seal kit 2 340074 4 adapter, 90° 3 400410 20 screw, 1/2-13 x ...

  • Page 96: Hr-9016

    96 right rear wheel motor case drain left rear wheel motor case drain left wing deck motors case drain right wing deck motors case drain right front deck valve t port right front wheel motor case drain left front wheel motor case drain front deck motors case drain hr-9016 38.1 return hydraulics seri...

  • Page 97: Hr-9016

    97 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 – 1 return manifold see 36.1 2 1003573 1 hose, pump to return manifold 3 1003575 1 hose, 4wd valve to pump 4 339911 1 o-ring, sae #10 face seal 5 340065 1 adapter, 90° 6 1003604 2 hose, rear wheel motor ...

  • Page 98: Hr-9016

    98 > change from previous revision hr-9016 39.1 4wd hose clamps serial no. All 9016-41 item part no. Qty. Description serial numbers/notes 1 400210 2 screw, 5/16-18 x 5” hex head 2 366114 2 spacer 3 3008792 5 spacer plate 4 3008793 6 clamp, double hose 5 366424 2 clamp, hose 6 452006 3 flat washer, ...

  • Page 99: Hr-9016

    99 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 340069 1 adapter, 90° 2 340217 1 adapter, tee 3 339963 1 locknut, bulkhead 4 340377 1 adapter, 90° 5 1003878 1 tube, 4wd valve to tee 6 1003605 1 hose, tee to pump 7 1003865 1 tube, lift valve to filter ...

  • Page 100: Hr-9016

    100 a c d d f f a b b b c c de e e f a - to steering valve aux port 1003601 right side cylinder base end 1003602 right side cylinder rod end 1003599 left side cylinder base end 1003600 left side cylinder rod end 1003590 front lift cylinder rod end tee 1003593 steering valve aux port hose part number...

  • Page 101: Hr-9016

    101 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 1003599 1 hose, right side cylinder base end 2 1003600 1 hose, right side cylinder rod end 3 1003601 1 hose, left side cylinder base end 4 1003602 1 hose, left side cylinder rod end 5 340167 1 adapter, ...

  • Page 102: Hr-9016

    102 to lift valve to lift valve to return manifold from pump to steering cylinder aux in out lt rt in out au x lt rt hr-9016 42.1 power steering hoses serial no. All 9016-42 1 2 3 4 5 7 6 8 9 10 11 12 13 3 4 9 10 11.

  • Page 103: Hr-9016

    103 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 1003876 1 tube, rt hose to rod end hose 2 1003875 1 tube, lt hose to base end hose 3 339961 2 locknut, bulkhead 4 339909 2 o-ring, sae #6 face seal 5 1003606 2 hose, valve to cylinder tubes 6 1003593 1 ...

  • Page 104: Hr-9016Sw

    104 > change from previous revision hr-9016sw 43.1 engine compartment clamps serial no. All 9016-43 item part no. Qty. Description serial numbers/notes 1 364190 3 clamp, wire harness 2 400266 2 screw, 3/8-16 x 1-1/2” hex head 3 446140 2 lockwasher, 3/8 4 443110 2 nut, 3/8-16 hex 5 365566 1 clamp,wir...

  • Page 105: Hr-9016

    105 > change from previous revision a b c d e f g h i j k l m n o p q a - instrument panel b - oil level, horn and seat relay c - front limit switch and cruise magnet d - front deck valves e - neutral and forward switches f - seat switch and air ride g - parking brake h - right wing deck valve i - r...

  • Page 106: Hr-9016

    106 hr-9016 components 45.1 steering valve part number 1002800 serial no. All tc500-28 1 2 3 4 5 6 7 8 10 9 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 31 32 33 34 35 36 37 4 4 4 11 11 39 30 38.

  • Page 107: Hr-9016

    107 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 443108 4 locknut, 5/16-18 center 2 n/s 1 port cover 3 c 1 seal, o-ring 4 c 4 seal, o-ring 5 c 4 seal, o-ring 6 443828 1 nut, 5/8-18 hex jam 7 n/s 4 special bolt 8 n/s 1 port manifold 9 b 3 spring, port ...

  • Page 108: Hr-9016

    108 a a hr-9016 46.1 air suspension part no. 5003625 serial no. All 9016-62 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 7 7 7 22 26 27 27 27 29 30 31 31 31 32 32 32.

  • Page 109: Hr-9016

    109 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 n/s 1 lower housing 2 n/s 1 scissors 3 n/s 1 upper housing 5003627 1 compressor kit 4 n/s 1 • compressor 5 n/s 1 • tie wrap 6 n/s 1 • clamp, compressor 7 n/s 4 • tie wrap 8 n/s 1 • bushing, strain 50036...

  • Page 110: Hr-9016

    110 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 5003634 1 pad, back 2 5003635 1 pad, seat 3 5003636 1 arm rest, left side 4 5003637 1 arm rest, right side 5 5003690 1 adjuster assembly 6 554390 1 seat switch 7 3003928 1 literature pouch 8 409757 2 sc...

  • Page 111: Hr-9016

    111 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 5003542 1 seal kit 1 n/s 1 • retaining ring 2 n/s 1 • o-ring, piston 3 n/s 1 • seal, piston 4 n/s 1 • seal, rod 5 n/s 1 • wiper 6 n/s 1 • backup ring, gland 7 n/s 1 • o-ring, gland 8 443126 1 nut, 5/8-11 ...

  • Page 112: Hr-9016

    112 > change from previous revision 16 18 19 20 19 20 hr-9016 49.1 rear wheel motor part number 5003540 serial no. All serial no. All item part no. Qty. Description serial numbers/notes 1 558066 8 screw, torx 2 5002110 1 front retainer 3 558063 1 shaft and bearing kit 4 557624 1 nut, hex 5 557623 1 ...

  • Page 113: Hr-9016

    113 > change from previous revision hr-9016 50.1 deck return canister part number 5003371 item part no. Qty. Description serial numbers/notes 1 ● 1 o-ring 2 ● 1 back up ring 3 ● 1 loaded u-cup 4 ● 1 rod wiper 5 471214 1 grease fitting 6 443132 1 nut, 3/4-16 hex 7 5003428 1 collar assembly ● 5003427 ...

  • Page 114: Hr-9016

    114 hr-9016 51.1 lift valve part number 1001802 serial no. All 9016-48 2 3 4 5 7 17 24 18 19 20 21 14 25 23 1 10 16 15 7 6 14 13 22 12 11 9 8.

  • Page 115: Hr-9016

    115 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 558005 1 plug assembly, relief valve 2 500745 3 plug assembly, port adapter 3 545914 3 spring, lockout 4 ■ 3 poppet assembly 5 500736 3 seat assembly 6 5001599 1 plunger, lockout 7 5001603 2 plunger, lo...

  • Page 116: Hr-9016

    116 > change from previous revision hr-9016 52.1 front lift cylinder part number 3006008 serial no. All 9016-49 item part no. Qty. Description serial numbers/notes 1 ● 1 psp seal 2 ● 2 back up ring 3 ● 1 o-ring 4 ● 1 o-ring 5 ● 1 back up ring 6 ● 1 internal snap ring 7 ● 1 external snap ring 8 ● 1 l...

  • Page 117: Hr-9016

    117 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 ● 1 psp seal 2 ● 2 back up ring 3 ● 1 o-ring 4 ● 1 o-ring 5 ● 1 back up ring 6 ● 1 internal snap ring 7 ● 1 external snap ring 8 ● 1 loaded u-cup 9 ● 1 rod wiper 10 471214 2 grease fitting ● 5003413 1 s...

  • Page 118: Hr-9016

    118 > change from previous revision hr-9016 54.1 deck valve part number 1004337 serial no. All 9016-51 item part no. Qty. Description serial numbers/notes 1 5002911 1 relief valve 5003579 1 • seal kit 2 5002912 1 relief valve 5003554 1 • seal kit 3 3010199 1 plug, sae #6 located opposite diagnostic ...

  • Page 119: Hr-9016

    119 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 5003342 1 check valve 5003582 1 • seal kit 2 5003344 1 shuttle, hot oil 5003582 1 • seal kit 3 5003346 1 3-way spool 5003583 1 • seal kit 4 5003348 1 solenoid vlave 5003583 1 • seal kit 5 5003506 1 coil...

  • Page 120: Danger

    120 1 2 3 4 5 6 7 8 a b c d e f r cut height bracket hole arm hole wheel mounting wheel mounting f a 3 1 f b 1 1-1/2 f c 2 2 f d 3 2-1/2 f e 4 3 f b 5 3-1/2 f c 6 4 f d 7 4-1/2 f e 8 5 r e 8 5-1/2 arm bracket wheel mounting instructions 1. While roatating wheel, tighten nut until wheel is difficult ...

  • Page 121: Hr-9016

    121 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 3009317 5 decal, caster cut height 2 3009318 2 decal, gage wheel cut height 3 3009319 1 decal, flip up deck 4 366609 2 decal, no step 5 3002502 7 decal, danger left wing right wing front 9016-63 1 1 1 1...

  • Page 122: Hr-9016

    122 hr-9016 57.1 front deck serial no. All 9016-57 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 1 3 3 4 4 6 9 10 11 11 11 11 11 11 11 11 13 14 15 23.

  • Page 123: Hr-9016

    123 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 1003430.2 8 hinge assembly 2 400286 12 screw, 3/8-16 x 2-3/4” hex head 3 446142 32 lockwasher, 3/8 hvy 4 444762 32 locknut, 3/8-16 center 5 400264 12 screw, 3/8-16 x 1-1/4” hex hd 6 453011 20 flat washe...

  • Page 124: Hr-9016

    124 inlet inlet outlet outlet outlet case drain case drain case drain motor orientation front hr-9016 58.1 front deck center section serial no. All 9016-56 1 2 3 5 6 7 9 / 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 8 8 8 8 7 7 7 7 7 8 6 15 16 12 12 12 4.

  • Page 125: Hr-9016

    125 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 2812056 1 deck, front assembly 2 352936 2 • bushing 3 2810069 3 motor, spindle assembly 5003763 1 • seal kit 4 ref 1 serial plate, front deck 5 440124 18 carriage bolt, 3/8-16 x 1-3/4” 6 453011 26 flat ...

  • Page 126: Hr-9016

    126 inlet outlet case drain motor orientation left winglet right winglet front inlet outlet case drain hr-9016 59.1 front deck winglets (right winglet shown) serial no. All 9016-55 1 / 2 8 3 6 7 24 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 4 5 6 14 4 6 7.

  • Page 127: Hr-9016

    127 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 2812054 1 deck, rh winglet 2 2812055 1 deck, lh winglet 3 2810069 2 motor, spindle assembly 5003763 1 • seal kit 4 366613 4 shim 5 440124 12 carriage bolt, 3/8-16 x 1-3/4” 6 453011 24 flat washer, 3/8 7...

  • Page 128: Hr-9016

    128 a a b b c c d d e - to return manifold e hr-9016 60.1 front deck hydraulics serial no. All 9016-58 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 22 19 20 1 2 2 2 2 2 3 4 4 2 2 7 10 15 15 15 15 16 21 right winglet motor right center motor center motor left center motor left winglet motor 6.

  • Page 129: Hr-9016

    129 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 340070 2 adapter, 90° 2 339989 8 adapter, straight 3 340055 2 adapter, 90° 4 340095 3 adapter, tee 5 ref 1 hose, front deck motor case drain see 38.1 6 1003557 2 hose, winglet 7 2810190 2 hose, winglet ...

  • Page 130: Hr-9016

    130 motor orientation left wing right wing front inlet inlet inlet inlet inlet inlet outlet outlet outlet outlet outlet outlet case drain case drain case drain case drain case drain case drain hr-9016 61.1 wing decks right wing shown serial no. All 9016-59 1 / 2 3 5 6 7 30 9 10 11 12 13 14 15 16 17 ...

  • Page 131: Hr-9016

    131 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 2812058 1 deck, right wing 2 2812057 1 deck, left wing 3 2810069 6 motor, spindle assembly 5003763 1 • seal kit 4 ref 2 wing deck serial plate 5 440124 36 carriage bolt, 3/8-16 x 1-3/4” 6 453011 48 flat...

  • Page 132: Hr-9016

    132 right wing deck hydraulics left wing deck hydraulics hr-9016 62.1 wing deck hydraulics serial no. All 9016-60 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 2 2 4 14 1 2 2 4 14 17 17 right center motor left outside motor left center motor left inside motor righ...

  • Page 133: Hr-9016

    133 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 340070 4 adapter, 90° 2 339989 8 adapter, straight 3 339972 2 adapter, straight 4 340095 4 adapter, tee 5 1003580 2 hose, outside to center motor 6 1003579 2 hose, inside to center motor 7 2810194 2 hos...

  • Page 134: Hr-9016

    134 > change from previous revision hr-9016 63.1 caster assemblies serial no. All 9016-62 item part no. Qty. Description serial numbers/notes 1 1004276.2 8 yoke, 11” tire wing decks only 1 1004275.2 2 yoke, 13” tire front deck only 2 1004277.2 10 tube, yoke pivot 3 363539 2 • bushing 4 471214 1 • gr...

  • Page 135: Hr-9016

    135 > change from previous revision hr-9016 item part no. Qty. Description serial numbers/notes 1 550346 1 tire, 11 x 4-5 smooth 1004023 only 1 5003200 1 tire, 13 x 6.5-6 multi rib 1004024 only 2 5003196 1 wheel 1004023 only 2 5003201 1 wheel 1004024 only 3 5003197 2 grease seal 4 5003198 2 bearing ...

  • Page 136: Hr-9016

    136 hr-9016 65.1 gage wheels and latch serial no. All 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 13 2 6 17 9016-63 8 18 / 19 20 21 22.

  • Page 137: Hr-9016

    137 > change from previous revision item part no. Qty. Description serial numbers/notes 1 461495 1 clevis pin, 1/2 x 2-1/2” 2 460028 2 cotter pin, 1/8 x 1” 3 1003423.2 2 yoke, gage wheel 4 3007442 2 spacer, arm pivot 5 3004113 4 bushing 6 441690 4 carriage bolt, 1/2-13 x 7” 7 446152 2 lockwasher, 1/...

  • Page 138: Hr-9016

    138 4387 psi 4387 psi 313 psi 2.81 ci tow valve a cp t t p b a d d t p b a d d t p b a d d t p b a d d b traction pump a c b d e f g h j k l m 25 psi 25 psi 10 micron 10 micron 25 psi crack bypass 10 micron air 2.9 psi 30 psi crack bypass return filter charge filter left front deck valve right wing ...

  • Page 139: Hr-9016

    139 > change from previous revision hr-9016 15.56 ci 15.56 ci front wheel motors 4wd valve rear wheel motors 12.5 ci .031 12.5 ci 2 1 3 4 a da b t cp dc db a c b d e f g h j k l m steering unit lift valve backpressure valve left wing cylinder right front cylinder left front cylinder right wing cylin...

  • Page 140: Hr-9016

    140 f9 3-3 vt/ye vt/ye vt/ye k12 1 2 sw5 dg/wh dg/wh dg/wh dg/wh s5 wh/bu or/bu k8 3-4 2-7 2-6 a a b b sw7 sw6 gy/wh gy/ye gy/ye wh/vt gy/ye gy/ye db/ye db/ye s a i b ye/rd 1 2 f5 sw1 off-none run - b+i+a; x+y start - b+i+s 1-7 1-1 ye/bk ye/bk gy/rd gy/rd or or or y x rd/ye or rd bk + - b1 m1 g g s1...

  • Page 141: Hr-9016

    141 2 1 f8 wh/rd 4-8 rd/ye wh/rd u12 + pm - bk 2 1 2 1 ye/bu 4 5 6 sw3b tn/gn 2-4 f10 1 2 dg/ye rd/ye 2 3 wh/bk 3-5 wh/bk tn/gn a-1 b-2 b-2 a-1 vt/wh sw10 b a gy/bk 3-6 sw13 sw12 d4 1 2 3 wh/bk pk/wh s7 3-7 a b sw4 2-3 bn/gn k13 k9 k10 k11 3-8 a-1 b-2 a-1 b-2 b-2 a-1 s2 s3 s8 2-2 bk bk bk bk bk rd/b...

  • Page 142: Hr-9016

    142 1-5 vt 2 1 u6 i g g s pk 2-8 4-12 4-10 4-10 4-9 pk u4 bk bk bk bk ye 4-6 d2 1-6 wh/bn wh/bn 2-11 sw17 bk + - ye lb/bk 1 2 3 bk sw11 sw14 bu 2-1 bu + - bk sw15 + - 4-2 1-2 bn bn + - bk sw16 bu wh/bn 604-ye or/bk u9 u10 u3 wh/bn 2 u8 1 or/bk 2 1 f6 eng f glow a bat e chrg b f bn gy/rd lb/bk or/bk ...

  • Page 143: Hr-9016

    143 f9 3-3 vt/ye vt/ye vt/ye k12 1 2 sw5 dg/wh dg/wh dg/wh dg/wh s5 wh/bu or/bu k8 3-4 2-7 2-6 a a b b sw7 sw6 gy/wh gy/ye gy/ye wh/vt wh/vt wh/vt wh/vt gy/ye gy/ye gy/ye gy/ye gy/ye db/ye db/ye ye/rd f5 1-7 1-1 ye/bk ye/bk gy/rd gy/rd or or or or or rd/ye rd/ye rd/ye rd/ye rd/ye or or rd bk + - b1 ...

  • Page 144: Hr-9016

    144 2 1 f8 wh/rd 4-8 rd/ye wh/rd u12 + pm - bk 2 1 2 1 tn/gn 2-4 f10 1 2 dg/ye dg/ye dg/ye dg/ye dg/ye rd/ye gy/rd ye/bk rd/ye gy/rd ye/bk rd/ye 2 3 wh/bk 3-5 wh/bk tn/gn a-1 b-2 b-2 a-1 vt/wh sw10 b a gy/bk 3-6 sw13 sw12 d4 1 2 3 wh/bk pk/wh s7 3-7 a b sw4 2-3 bn/gn k13 k9 k10 k11 3-8 a-1 b-2 a-1 b...

  • Page 145: Hr-9016

    145 1-5 vt 2 1 u6 i g g s pk 2-8 4-12 4-10 4-10 4-9 pk u4 bk bk bk bk ye 4-6 d2 1-6 wh/bn wh/bn 2-11 sw17 bk + - ye lb/bk 1 2 3 bk sw11 sw14 bu 2-1 bu + - bk sw15 + - 4-2 1-2 bn bn + - bk sw16 bu wh/bn 604-ye or/bk u9 u10 u3 wh/bn 2 u8 1 or/bk 2 1 f6 eng f glow a bat e chrg b f bn gy/rd lb/bk or/bk ...

  • Page 146: Hr-9016

    146 x w w w x w x w w-x o-ring face seal size o-ring boss dash size w-x o-ring face seal size o-ring boss dash size w-x o-ring face seal size w-x o-ring face seal size o-ring face seal size w-x o-ring face seal size o-ring face seal size o-ring face seal size w-x o-ring face seal size o-ring face se...

  • Page 147: Hr-9016

    147 > change from previous revision hr-9016 adapter part number. Dash size adapter type (w) o-ring (x) o-ring (y) o-ring (z) o-ring 339972 4-4 straight adapter 339908 339896 339974 4-6 straight adapter 339908 339897 339979 6-6 straight adapter 339909 339897 339984 8-8 straight adapter 339910 339898 ...

  • Page 148: Fluids And Compounds

    Fluids and compounds * refer to the parts & maintenance manual for the correct hydraulic oil requirements for your machine. Textron golf, turf & specialty products offers a high usage parts catalog illustrating commonly used parts through easy to read line drawings. See your local tgtsp dealer for a...

  • Page 149: Index

    149 index 1001752 ...................... 69 1001802 ...................... 47 1002679 ................ 41 , 43 1002769 ...................... 95 1002785 ...................... 81 1002800 ...................... 63 1002885 ...................... 85 1002886 ...................... 85 1002889 ..............

  • Page 150: Index

    150 index 3006639.......................75 3006644.......................35 3006656.......................69 3006658.......................78 3006663.......................37 3006664.......................37 3006723.......................37 3006724.......................37 3006727......................

  • Page 151: Index

    151 index 358794 ........................ 65 359615 ............ 69 , 92 , 93 359860 ...................... 133 360053 ........................ 33 360111 ................ 60 , 135 360885 ........................ 45 360970 ........................ 67 361001 ...................... 104 361005 ............

  • Page 152: Index

    152 index 552824.......................125 554390.......................110 554748...................67 , 77 554854.......................107 554855.......................107 554856.......................107 554857.......................107 555846...................41 , 43 555867.......................

  • Page 153: Index

    153 index.

  • Page 154

    Textron golf, turf & specialty products po box 7708, charlotte, nc 28241-7708 www.Ttcsp.Com ,.