1. DL manuals
  2. Rapid
  3. Safes
  4. 2600KP
  5. Manual

Rapid 2600KP Manual

Manual is about: Item No. 98177 Item No. 98172

Summary of 2600KP

  • Page 1

    Rapid safe 2600kp item no. 98177 exterior: 10.7"x 8.7" x 2.9" interior: 7.0" x 7.7" x 2.2" power: 12 v 1.0a or four (4) aa batteries (batteries not included) 1 2 4 5 6 7 3 not pictured: • owner’s manual • warranty card rapid safe 2700kp item no. 98172 exterior: 12.7" x 8.7" x 2.9" interior: 9.0" x 7...

  • Page 2: Batteries

    Power jack stop catches foam power jack 4 batteries for backup or mobile use, your safe requires four aa batteries (not included). To install batteries, remove inner foam from base and verify ac adapter is uplugged. Press down on the two lock tabs and rotate door forward on the battery compartment. ...

  • Page 3: Battery Power Mode

    Rfid reader & key pad “h” button lock tabs 5 battery power mode when the rapid ® safe is unplugged, and is operating on battery power, you must press any button on the lid to activate the reader. Pressing any button on the lid causes the system to go from battery saving mode to ready status. For exa...

  • Page 4: How to Program Your

    One to five rfid tags can be programmed into the safe. 6 how to program your rfid tags your rapid ® safe includes three (3) styles of rfid tags, including: • 1 wristband • 1 key fob • 2 decals *additional styles and sizes can be purchased separately. The rapid ® safe can store up to 5 tags. To progr...

  • Page 5: How to Program Your Key Code

    Program button 7 4. Verify the rfid tag is programmed by holding the tag over the rfid reader with the lid open. The motor should cycle after each scan. 5. If the rfid tag does not program into the safe, the program function will time out after ten seconds and the safe will return to normal operatio...

  • Page 6: Closing The Safe

    Cable lug loop 8 how to remove all tags from safe: 1. Open the rapid ® safe with either the key or a previously programmed rfid tag or key code. Locate the red program button. Press and hold the button for five seconds to erase all tags from the safe. All five red leds will begin to blink in sequenc...

  • Page 7: Rapid

    9 rapid ® safe limited warranty hornady ® security ™ warrants the rapid ® safe will, in normal use and service, be free from defects in workmanship or materials for one (1) year from date of purchase. This limited warranty does not cover any of the following: (a) damage, deterioration, or malfunctio...

  • Page 8: To Receive Warranty Service

    10 product registration and service you must register your rapid ® safe in order to obtain warranty service. Simply complete and return the enclosed product registration card or submit through our website by going to hornady.Com/warranties. To receive warranty service in order to report a warranty c...

  • Page 9: Fcc Statement

    11 fcc statement 1. This device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. C...