Rapid EBR-LCM-DALIG64 Product Manual - Technical Data
4
Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice.
Dimensions
See diagrams opposite
Weight
0.45kg
Supply Voltage
220-240VAC
Frequency
50Hz
Relay rating
Switched live
10A
Switched permanent live 6A
Volt free output (VFC)
6A
Terminal Capacity
Mains - 4mm
2
in wiring
compartment
Switched inputs and CAN -
2.5mm
2
in wiring compartment
DALI Voltage
16VDC via DALI
DALI Output Current
250mA (maximum)
DALI bus
Cannot be considered as SELV
since DALI, ballasts only offer
basic insulation, therefore all
devices on the DALI bus must be
wired as if carrying mains
potential.
Temperature
-10ºC to 35ºC
Humidity
5 to 95% non-condensing
Material (casing)
Flame retardant ABS and PC/ABS
Classifications
Insulation
Class II
Purpose
Operating control
Construction
Independently mounted
control for surface
mounting
Type of action Type 1.B action
micro disconnection
Software class Class A
Pollution
Degree 2
Compliance
EMC-2004/108/EC
LVD-2006/95/EC
Important
For lighting purposes only with suitable circuit
protection. For fixed wiring only.
Technical data
C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel:
+ 44 (0) 333 900 0671
Fax:
+ 44 (0) 333 900 0674
www.cpelectronics.co.uk
enquiry@cpelectronics.co.uk
Ref: #WD584 Issue 4
FM 45789
EMS 534520
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in
accordance with the latest edition of the IEE Wiring
Regulations and any applicable Building Regulations.
Part numbers
Part number
Description
Control module
EBR-LCM-DALIG64 Pluggable DALI lighting control module
Accessories
UNLCDHS
Universal LCD programming handset
202mm
150mm
14
6m
m
12
7m
m
Fixing points
M6 (1/4”)
Height - allow 150mm for total height of unit (including
connectors and cable)