Raptor R8 Quick Start Manual - Maintaining Ruggedness
MAINTAINING RUGGEDNESS
Your Raptor device is fully rugged, however you must be careful to use the device
correctly to ensure it remains rugged at all times.
Connector rubber covers:
Must be kept securely fitted at all times to ensure maximum IP rating
of the device. When using connectors make sure to only use supplied accessories to be careful to
not allow water or dust to enter the device.
Be careful not to expose the device to water or dust when swapping out the battery, SIM or SD cards.
Case screws:
Must never be tampered with otherwise water/dust ingress can be compromised. If
you believe case screws are loose, then please inform Raptor support immediately.
Prolonged immersion:
In water is not recommended. Whilst you Raptor can be submerged in water,
doing so for prolonged times, over the specified testing times can lead to water leaks.
Casing:
Check your device regularly for knocks or cracks in the casing. Your Raptor is rugged,
however, multiple drops over time can compromise the case and seals, allowing water and dust to
enter the device.
External headset
USB Connector
SIM Card
MicroSD Card
Case screws