Raritan Domionion KX III Quick Setup Manual - page 5
Dominion KX III Quick Setup Guide
5
QSG-DKX3-v3.1.0-0D-E 255-62-0003-00-RoHS
The date and time settings impact SSL certificate validation if
LDAPS is enabled.
Use the Date/Time Settings page to specify the date and time
for the KX III. There are two ways to do this:
Manually set the date and time.
Synchronize the date and time with a Network Time
Protocol (NTP) server.
To set the date and time:
1. Choose Device Settings > Date/Time. The Date/Time
Settings page opens.
2. Choose your time zone from the Time Zone drop-down
list.
3. Adjust for daylight savings time by checking the "Adjust for
daylight savings time" checkbox.
4. Choose the method to use to set the date and time:
User Specified Time - use this option to input the date
and time manually. For the User Specified Time
option, enter the date and time. For the time, use the
hh:mm format (using a 24-hour clock).
Synchronize with NTP Server - use this option to
synchronize the date and time with the Network Time
Protocol (NTP) Server.
5. For the Synchronize with NTP Server option:
a. Enter the IP address of the Primary Time server.
b. Enter the IP address of the Secondary Time server.
Optional
Note: If DHCP is selected for the Network Settings on the
Network page, the NTP server IP address is
automatically retrieved from the DHCP server by default.
Manually enter the NTP server IP address by selecting
the Override DHCP checkbox.
6. Click OK.
QS R ule
Step 5: Launching the KX III Remote Console
Log in to your KX III Remote Console from any workstation
with network connectivity that has Microsoft .NET
®
and/or
Java Runtime Environment
™
installed.
To launch the KX III Remote Console:
1. Launch a supported web browser.
2. Enter either:
The URL - http://IP-ADDRESS to use the Java-based
Virtual KVM Client
Or
http://IP-ADDRESS/akc for the Microsoft .NET-based
Active KVM Client
IP-ADDRESS is the IP address assigned to your KX III
You can also use HTTPS, or the DNS name of the KX III
assigned by your administrator (if applicable).
3. You are always redirected to the IP address from HTTP to
HTTPS.
4. Enter your username and password. Click Login.
Access and Control Target Servers Remotely
The KX III Port Access page provides a list of all KX III ports,
as well as the connected target servers, their status, and
availability.
Access a Target Server from the KX III
To access a target server:
1. On the KX III Port Access page, click the Port Name of the
target you want to access. The Port Action Menu is
displayed.
2. Choose Connect from the Port Action menu. A KVM
window opens with a connection to the target.
Switch between Target Servers
To switch between KVM target servers:
1. While already using a target server, access the KX III Port
Access page.
2. Click the port name of the target you want to access. The
Port Action menu appears.
3. Choose Switch From in the Port Action menu. The new
target server you selected is displayed.
Disconnect from a Target Server
To disconnect a target server:
On the Port Access page, click the port name of the target
you want to disconnect from, then click Disconnect on Port
Action menu when it appears.
Or