Raritan Z-SERIES - Brochure - Selection Menu
10
Operating
Z4200U
Selection Menu
The Selection Menu (Figure 9) lists channels, serial numbers, scan rates, and the number of servers currently detected
by the system, sorted by computer name in alphabetical order. Use the
↑
>,
↓
>, or keys
to select a channel. Press to switch to the selected computer/channel.
Figure 9.
[F2] Selection Menu
Alternatively, you may switch between computers without using the OSUI, by using the UP and DOWN buttons in the
front of the USTS user station. These buttons switch between computers by name in alphabetical order: UP switches to
the previous computer by name in alphabetical order; DOWN switches to the next computer by name in alphabetical
order.
Edit Menu
The Edit Menu F3> (Figure 10) can be used to make changes to the computer channel name and its scan rate
the
time interval, in seconds, that a channel’s computer is to remain displayed on monitor during scanning. It can also be
used to designate a channel as a Home> computer.
1. Press
, ,
←
>, or
→
> to highlight (in yellow) the field to be edited
2. Press
. Highlight turns green.
3. Edit name and/or scan time.
4. Press the Home> key if you wish to designate this computer/channel as your home computer. An “H” will appear in
the right most column. This designation will enable the user to quickly select or switch directly to the home computer.
At the Selection Menu, pressing the key once highlights the home channel. With no OSUI displayed, rapidly
pressing the key twice automatically switches the user to the computer designated as the home computer.
5. Press
when completed. Highlighted area will turn yellow
6. Press
to save changes and exit, or ESC> and then N> to exit without saving changes.
7. Press
to return to Selection Menu.
8. Verify that new name appears on Selection Menu in green.
Figure 10.
[F3] Edit Menu