Rascal P327 Owners Manual & Service Record - Driving Your Vehicle
Transferring In And Out Of Your Powerchair
If you feel at all uncertain about getting in or our of your powerchair get assistance.
Transferring into your Powerchair
• Make sure that your powerchair is on a level surface, and it is not in Freewheel.
• To make sure the brakes are engaged try and push the powerchair before getting in.
• Ensure that the controller is turned off before your try to get into your powerchair
• We recommend moving the footplate to the vertical position.
• With your back to the chair, steady yourself with the armrests and lower yourself gently into the seat. Do not
put undue weight on the armrests !
Getting out of your Powerchair
When getting out be sure that your powerchair is on a level surface, is not in freewheel and the power is off
before you try to get out. Position your feet either side of the footplate and raise the footplate to the vertical
position before getting off. If you feel uncertain about getting out, get assistance.
13
Driving Your Vehicle
1.
Before you set out, do check the weather forecast. We suggest that you make sure you are wearing suitable
clothing, whether your journey is long or short.
2.
If you are taking medication check with your doctor or physician that your ability to control the vehicle will
not be impaired and do not drink alcohol and drive.
3.
Only use the vehicle for the purpose its intended for. Do not drive through water or on slippery surfaces;
do not transport more than one person; do not tow other vehicles or carry excess weight.
4.
Before sitting in your Powerchair, check both the freewheel levers are not in the Freewheel position
5.
Check the battery charger is disconnected.
6.
Check the backrest is upright
7.
Ensure your feet are securely on the footrest.
8.
Check you have adjusted the seat as instructed in this manual – get comfortable and secure your seat belt.
9.
Make sure the way ahead is clear.
10. Switch on the power. Check the battery level indicator is in the green area.
11. Speed Control. Set the speed control to a low setting.
12. Gently push the joystick in the direction you wish to go. The vehicle will now move off. The further you
push the joystick the faster the vehicle will go.
13. To brake, return the joystick to the neutral position. If you become unsure or feel unsafe release the
joystick immediately.
14. As you get accustomed to the power you can increase the speed.
15. Switch off when not in use. To conserve your batteries and prevent the vehicle accidentally moving, always
turn off the power when your Powerchair is not in use.
Warning!
Whether or not this is your first mobility vehicle, please read these guidelines as all vehicles
differ. Failure to do this may cause damage to you, a third party or the vehicle.