Rastar Baby Lamborghini aventador LP700-4 Ride-on Instructions - Assembly
Put the storage battery(7) into the
battery compartment. Plug the
interface to the jack,connect the
red terminal and the black terminal
respectively to the anode
andcathode of battery. (Notice:
make sure they are correctly
connected, red to red,black to
black, otherwise, it will cause
short-circuit.)
Install the battery locker(8) to the
designated position, and fix it with
2 screws(5)
Install the battery cover(9) to the
designated position, and fix it with
2 screws(5)
Replace or take out the storage
battery and power.
Loosen the 2 screws(5) on battery
cover(9)
Unplug the interface and jack,
loosen the 2 screws(5) on battery
locker(8), then the storage battery
can be taken out.
ASSEMBLY
04
Put the seat (4) to the designated
position, fix the front buckles of
seat to the grooves of car body.
Vertically press down the seat until
its rear buckles are fixed to the
side grooves.
Notice: This seat is equipped with
seat belt, which is only a decoration
to develop the safety sense of
children, it can not provide any
substantial protection.
2.Install seat
1.Install battery and power
supply
1
2
9
5
8
Jack
Interface
Front buckle
Rear buckle
Groove
Groove
Side groove