N56w24720 n. Corporate circle sussex, wi 53089 800-451-1460 262-246-4828 (fax) www.Area-of-refuge.Com www.Rathmicrotech.Com rp8500sprvsr ver. 3 10/17 made in the usa 2 year warranty 360° supervision system installation & operations manual 2500-56sprvsr 2500-76sprvsr 2500-92sprvsr 2500-12sprvsr 2500-...
Thank you for purchasing rath’s 360° supervision system. We are the largest emergency phone manufacturer in north america and have been in business for over 35 years. We take great pride in our products, service, and support. Our emergency phones are of the highest quality. Our experienced customer ...
Page 2 wiring for 12-36 zone system: note: for 12-16 zone systems (1) 2500 supervisor board is included, for 28-36 zone systems (2) 2500 supervisor boards are included. Wiring for 56-92 zone system: note: for 56 zone systems (3) 2500 supervisor boards are included, for 76 zone systems (4) 2500 super...
Page 3 5. Attach supplied +12vdc power supply to appropriate terminals on 2500 supervisor board. Insert the + wire into the + connector and - wire into the return connector on board and secure by screwing down the capture clip. For systems larger than 16 zones, connect subsequent 2500 supervisor boa...
6. Ensure switches for monitored ports are set to proper positions. The system comes from factory with switches in “disable” position. If port is to be monitored, slide switch to “enable”. Switches on positions 19 and 20 are for central office (telephone) lines, base station phone, or phones. Page 4...
Page 5 9. Mount swing-mount bracket to wall using appropriate fasteners (skip this step if mounting 2500 supervisor board in 19” rack). 10. Attach 2500 supervisor board to mount using screws removed in step 2. 11. Plug feeder cables into distribution module. 12. Plug base station phone, phones, and ...
Page 6 typical system wiring diagram.
