Rath 2500-PWR24 Installation & Operation Manual

Summary of 2500-PWR24

  • Page 1

    N56 w24720 n. Corporate circle sussex, wi 53089 800-451-1460 262-246-4828 (fax) www.Area-of-refuge.Com 03/13 made in the usa 3 year warranty installation & operations manual 2500-pwr24 vdc power supply ver. 2 rp8500225 www.Area-of-refuge.Com.

  • Page 2: Table of Contents

    Welcome to rath. Thank you for purchasing the rath 24vdc power supply system. We take great pride in our products, service and support. Our #1 mission is customer satisfaction. When evaluating emergency communication systems, you can rely on rath to continually provide innovative thinking, design an...

  • Page 3: 24 Volt Power Supply

    24 volt power supply pg. 2 installation: • locate a suitable mounting location for the supply • mount the power supply using 6 mounting screws (not provided) and punch out conduit knockouts for wire runs • for each call box you must run an 18 gauge, 2 wire set down to the power supply • feed the ac ...

  • Page 4

    Power supply to call box wiring diagram 2100-_____ call box 24 volt power supply 120 vac 0 vac ground 2500-_____ smartrescue base station pg. 3 note: a three prong plug is included with the power supply conduit with electrical can also be attached to the power supply wiring requirements for power su...

  • Page 5: Mounting Dimensions

    Mounting dimensions ) back side pg. 4 8.30 in 0.60 in 1.50 in 8.30 in 10.60 in 9.60 in 9.00 in 5.85 in 2.70 in 1.36 in 1.10 in 1.50 in 3.50 in 1.50 in 0.60 in 0.60 in 1.50 in side bottom top www.Area-of-refuge.Com.

  • Page 6: Troubleshooting

    Troubleshooting problem possible cause & fixes green power led are not illuminated: • make sure the power supply is connected to a good 120vac power source • make sure 120vac power connection in the power supply is wired properly call station does not have power: • make sure the green led’s are illu...