1. DL manuals
  2. Ratio
  3. Diving Instrument
  4. CC Transmitter
  5. User manual

Ratio CC Transmitter User manual

Manual is about: Ratio Color-Coded Wireless Transmitter for iDive and iX3M

Summary of CC Transmitter

  • Page 1

    Cc transmitter user manual ratio® color-coded wireless transmitter for idive and ix3m “transmitter ready” attention: requires os 4.X.X and a compatible idive or ix3m. Ver. 1.3.

  • Page 2

    2 think green if possible do not print this manual. Use your tablet or your pc to consult it ..

  • Page 3

    3 warning! This is not the user manual of the idive/ix3m dive computer. You can download the user manual of your ratio® dive computer from: www.Ratio-computers.Com (“support” area).

  • Page 4

    4 in order to pair the cc transmitter to your idive or ix3m the os 4.X.X of higher have to be installed in your “transmitter ready” unit. You can update the os installed in your idive or ix3m “transmitter read” using the divelogger. All the idive and ix3m that can be paired with the cc transmitter h...

  • Page 5

    5 index introduction important warnings 7 general warnings about the cc transmitter 8 danger warnings about the cc transmitter 9 care and maintenance how to recharge the battery prepare the cc transmitter for the dive 12 install the cc transmitter on the first stage 13 turn on the cc transmitter and...

  • Page 6

    6 introduction thank you for having purchased the ratio® cc transmitter. Ratio®, with the quality of its products, always stands by you to guarantee comfort, leisure and safety when diving. Check periodically the presence of possible updates of this manual on web site www.Ratio-computers.Com the man...

  • Page 7

    7 important warnings general warnings about the cc transmitter it is necessary to read this manual carefully before using the computer ratio®. A wrong use of this computer or its accessories will nullify the warranty and could cause permanent damages to the device and/or its accessories. • the divin...

  • Page 8

    8 danger warnings about the cc transmitter warning: do not expose the cc transmitter to pressure higher of 300 bar (4351 psi) max readable pressure: 250 bar (3625 psi) max supportable pressure: 300 bar (4351 psi) the ratio® cc transmitter is not meant for a professional use. The ratio® cc transmitte...

  • Page 9

    9 you do not know and accept that kind of risk, do not use the ratio® cc transmitter. Refer to your instructor or to your diving certification agency to get instructions about how to manage high pressure ports. Important warinig: this is not the manual of the dive computer, this is the manual of the...

  • Page 10

    10 how to recharge the battery the ratio® cc transmitter has a rechargeable li-ion battery without memory effect, the given autonomy data may change of +/-15% depending on the environment temperature. Attention: charge the cc transmitter completely before using it for the first time. Recharge the cc...

  • Page 11

    11 once the battery is completely charged, even if the device remains connected to electricity, the cc transmitter interrupts the electricity feeding automatically. Anyway is suggested not to charge the cc transmitter over 8 hr. Attention: do not leave the ratio® cc transmitter completely discharged...

  • Page 12

    12 prepare the cc transmitter for the dive install the cc transmitter on the first stage the cc transmitter have to be installed on an hp (high pressure) port of your first stage. Refer to the user manual of your regulator in order to find the right port on your first stage. Install the cc transmitt...

  • Page 13

    13 { turn on the cc transmitter and check the battery cc transmitter automatically powers up as soon as the tank pressure is detected. In order to turn on the transmitter, it is necessary to connect it to a tank and then open the tank valve. It is always advisable to open the tank gradually, and in ...

  • Page 14

    14 pair the cc transmitter to your idive after powering up the cc transmitter, go on transmit menu on your idive (by pressing the bottom-left button on the watch screen and swipping the menu entries). Place the idive about 20-30cm from the cc transmitter (attention: if you place the cc transmitter t...

  • Page 15

    15 pair the cc transmitter to your ix3m after powering up the cc transmitter, go on transmit menu on your ix3m (by pressing the first button from the left from the watch mode and wipping the menu entries). Place the ix3m about 20-30cm from the cc transmitter (attention: if you place the cc transmitt...

  • Page 16

    16 change the tx id of the cc transmitter in case you experice interferences with other cc transmitters you have to change the transmittion channel (tx id) of your cc transmitter. Each cc trasnmitter has 31 tx id channels, the tx id is randomly assigned, and it is saved in the memory of cc trasnmitt...

  • Page 17

    17 the cc transmitter during the dive bar / psi: the bar value (psi if the imperial unit system is set) is displayed in the bottom-right part of the screen of your idive or ix3m. The bar/psi value shows how many bar/psi of gas are left in your tank. The bar/psi value is shown 30 seconds after the co...

  • Page 18: Rbt In No-Deco Dives

    18 rbt and tank reserve: the rbt (remaining bottom time ) is shown in the bottom-center part of the screen of your idive/ix3m the rbt is calculated according to your current breath rate. It may take up to 2-5 minutes in order to let the idive/ix3m collects enought data to calculate your breath rate....

  • Page 19: Rbt In Deco-Stops Dives

    19 rbt in deco-stops dives if your dive requires deco stops (safety stop and deep stop are not considered mandatory deco stops) the rbt is the time (in minutes) that you can stay at your current depth with your current breath rate, before, considered the time that you will need to perform the requir...

  • Page 20

    20 the color-code during the dive: the ratio® cc transmitter will let your buddy or your diving instructor know the status of your tank even from distance. If you need to hide the status of your tank (eg. A diving instructor when teaching) the dedicated “black-out” cap is available. Do not applies p...

  • Page 21

    21 the cc transmitter after the dive the cc transmitter will automatically turn off 30 seconds after no pressure is detected. (close the tank’s valve and purge the pressure from the second stage) to clean the cc transmitter use exclusively fresh water, removing all salt sediments. Leave the cc trans...

  • Page 22

    © 2017 the reproduction, even partial, without stated approval is severely prohibited ratio® computers..