1. DL manuals
  2. Ratoc Systems
  3. Computer Hardware
  4. CB31U
  5. User Manual

Ratoc Systems CB31U User Manual

Manual is about: Ultra SCSI (Fast-20) CardBus PC Card

Summary of CB31U

  • Page 1

    Ultra scsi (fast-20) cardbus pc card cb31u user’s guide march 2005 rev. 4.0

  • Page 2: Cb31U

    Cb31u 1. Introduction..................................................................................1 1-1. Package confirmation ............................................................................................................... 1 1-2. System requirements .................................

  • Page 3: 1. Introduction

    1. Introduction 1 1. Introduction this user’s guide describes how to install, use, and troubleshoot the ratoc cb31u ultra scsi cardbus pc card(called cb31u in this user’s guide). 1-1. Package confirmation check package contents: • cb31 ultra scsi cardbus pc card • cb31 setup cd-rom 1, floppy disk 1 ...

  • Page 4: 2. Setup

    2. Setup 2 2. Setup when you use windows 95, go to chapter 2-1. When you use windows 98, go to chapter 2-2. When you use windows me, go to chapter 2-3. When you use windows 2000, go to chapter 2-4. When you use windows xp, go to chapter 2-5. Restrictions • at least one scsi device must supply termin...

  • Page 5: 2-1. Windows 95 Setup

    W indows95 3 2. Setup 2-1. Windows 95 setup here’s how to get started with the cb31u and scsi devices on windows 95: 1. Check the restrictions before you install the cb31u. 2. Install the cb31u into the pc. Refer to chapter 2-1-1. 3. Confirm the installation. Refer to chapter 2-1-2. 4. Remove the cb...

  • Page 6

    W indows95 4 2. Setup if you find a pcic or compatible pcmcia controller string under the pcmcia socket, your pc card slot may not be able to use cardbus pc card or cardbus setting may be set disable in the bios of your pc. If cardbus setting is disable in the bios, select cardbus from disable/pcic ...

  • Page 7

    W indows95 5 2. Setup c. Double-click the cardbus controller name string to show the property window. If this device is working properly appears under the device status, you can use the cb31u. 3. Grasp the cb31u by the edges with the label facing upward. Insert the cb31u into the slot and push it in...

  • Page 8

    W indows95 6 2. Setup 4. When the update device driver wizard window appears a. When the update device driver wizard window appears, insert the cd-rom or the floppy disk included in this package and click next. B. When scsi cardbus pc card rex cb31appears in the window, click finish..

  • Page 9

    W indows95 7 2. Setup c. If a message requesting insertion of a floppy disk appears, click ok. D. When copying files... Appears, you will see a message prompting you to insert the setup disk. Then type a:\ as floppy drive letter or type cd-rom drive letter for the source of files and click ok. E. Wa...

  • Page 10

    W indows95 8 2. Setup 2-1-2. Confirming the installation 1. Click my computer with the right button. 2. Select properties. You will see the system properties window below. 3. Click the device manager tab. 4. Double-click scsi controllersin the list. 5. Make sure there is a scsi cardbus pc card rex c...

  • Page 11: 2-1-3. Removing The Cb31U

    W indows95 9 2. Setup 7. Click on the general tab. If this device is working properlyappears under device status, you installed the cb31u driver correctly. 2-1-3. Removing the cb31u when you want to remove the cb31u from the pc, you have to follow these steps through. 1. Click the pc card iconon the...

  • Page 12: 2-2. Windows 98 Setup

    W indows95 10 2. Setup 2-2-1. Installing the cb31u on windows 98 1. Check to see if your pcmcia controller supports cardbus pc cards. A. Click my computer with the right button. B. Select properties. You will see the system properties window below. C. Click the device manager tab. D. Double-click on...

  • Page 13

    W indows98 2. Setup 11 if you find a pcic or compatible pcmcia controller string under the pcmcia socket, your pc card slot may not be able to use cardbus pc card or cardbus setting may be set disable in the bios of your pc. If cardbus setting is disable in the bios, select cardbus from disable/ pci...

  • Page 14

    W indows98 2. Setup 12 b. When the following window appears, select search for the best driver for your device (recommended) and click next. 3. When the add new hardware wizard window appears a. When the add new hardware wizard window appears, insert the floppy disk or the cd-rom included in this pa...

  • Page 15

    W indows98 2. Setup 13 c. When the following window appears, check floppy disk drives or cd-rom drive and click next. D. When the following window appears, select the updated driver (recommended) scsi cardbus pc card rex cb31 and click next. If advansys pci scsi host adapter appears instead of scsi ...

  • Page 16

    W indows98 2. Setup 14 f. When the following window appears, click finish. G. Wait until the pc card (pcmcia) icon appears on the windows taskbar. This icon indicates that the cb31u is recognized. H. Remove the floppy disk from the pc. E. When the following window appears, click next..

  • Page 17

    W indows98 2. Setup 15 when you select one of the other drivers. If advansys pci scsi host adapter appears instead of scsi cardbus pc card rex cb31 under the updated driver (recommended) at step d. In 3., you have to select one of the other drivers. 1. Select one of the other drivers. Click the view...

  • Page 18

    W indows98 2. Setup 16 5. You will see the following window. Click finish. 3. Scsi cardbus pc card rex cb31 will appear. Click next. 4. You will see the following window. Click next..

  • Page 19

    W indows98 2. Setup 17 2-2-2. Confirming the installation 1. Click my computer with the right button. 2. Select properties. You will see the system properties window below. 3. Click the device manager tab. 4. Double-click scsi controllersin the list. 5. Make sure there is a scsi cardbus pc card rex ...

  • Page 20: 2-2-3. Removing The Cb31U

    W indows98 2. Setup 18 2-2-3. Removing the cb31u when you want to remove the cb31u from the pc, you have to follow these steps through. 1. Click the pc card iconon the windows taskbar. 2. You will see the message saying stop rex cb31. 3. Select stop scsi cardbus pc card rex cb31. 4. When the window ...

  • Page 21: 2-3. Windows Me Setup

    19 w indows me 2. Setup 2-3. Windows me setup here’s how to get started with the cb31u and scsi devices on windows me: 1. Check the restrictions before you install the cb31u. 2. Install the cb31u into the pc. Refer to chapter 2-3-1. 3. Confirm the installation. Refer to chapter 2-3-2. 4. Remove the ...

  • Page 22

    20 w indows me 2. Setup e. Double-click the cardbus controller name string to show the property windows. If this device is working properly appears under the device status, you can use the cb31u. 2. Grasp the cb31u by the edges with the label facing upward. Insert the cb31u into the slot and push it...

  • Page 23

    21 w indows me 2. Setup 3. When the add new hardware wizard window appears a. When the add new hardware wizard window appears, insert the floppy disk or the cd-rom included in this package and select automatic search for a better driver(recommended). Click next. B. When the following window appears,...

  • Page 24

    22 w indows me 2. Setup 2-3-2. Confirming the installation 1. Click my computer with the right button. 2. Select properties. You will see the system properties window below. 3. Click the device manager tab. 4. Double-click scsi controllersin the list. 5. Make sure there is a scsi cardbus pc card rex...

  • Page 25: 2-3-3. Removing The Cb31U

    23 w indows me 2. Setup 7. Click on the general tab. If this device is working properlyappears under device status, you installed the cb31u driver correctly. 2-3-3. Removing the cb31u when you want to remove the cb31u from the pc, you have to follow these steps through. 1. Click the pc card iconon t...

  • Page 26: 2-4. Windows 2000 Setup

    W indows2000 2. Setup 24 2-4-1. Installing the cb31u on windows 2000 1. Check to see if your pcmcia controller supports cardbus pc cards. A. Click my computer with the right button. B. Select properties. You will see the system properties window below. C. Click the hardware tab. 2-4. Windows 2000 se...

  • Page 27

    W indows2000 2. Setup 25 d. Click the device manager button. E. Double-click on the pcmcia adapters string and make sure there is a cardbus controller name string without “!” or “x” marks. If you find a intel pcic compatible pcmcia controller string under the pcmcia adapter, your pc card slot may no...

  • Page 28

    W indows2000 2. Setup 26 f. Double-click the cardbus controller name string to show the property windows. If this device is working properly appears under the device status, you can use the cb31u. 2.Grasp the cb31u by the edges with the label facing upward. Insert the cb31u into the slot and push it...

  • Page 29

    W indows2000 2. Setup 27 4. You will see the screen below.Click yes to restart. 5. Click my computer with right but- ton and select properties.You will see the screen below. Click the hardware tab. And click on the device manager button. 6. Double-click on the scsi and raid controllers and find a ad...

  • Page 30

    W indows2000 2. Setup 28 7. You wll see the screen below. You will find this device is working properly under the device status. If device status is error,click the troubleshooting button. 8. Click driver tab.You will see the screen below.Click the update driver button..

  • Page 31

    W indows2000 2. Setup 29 9.You will see the screen below.Click next. 10.You will see the screen be- low. Check “search for a suitable driver for my device(recommended) ” and click next. 11.You will see the screen be- low. Insert the floppy disk or the cd-rom included in this package. Check “floppy d...

  • Page 32

    W indows2000 2. Setup 30 12.You will see the screen below.Click next. 13.You will see the screen below. Ignore this message and just click yes ..

  • Page 33

    W indows2000 2. Setup 31 14.You will see the screen below. Remove the floppy disk and click finish. 15.Click the driver tab on the scsi pc card rex cb31 win2000 properties window. You can find a scsi pc card rex cb31 win2000 string. After that, click ok..

  • Page 34

    W indows2000 2. Setup 32 16. If you find a scsi pc card rex cb31 win2000 string under the scsi and raid controllers in the device manager, the cb31u is recognized. 17. Wait until the pc card (pcmcia) icon appears on the windows taskbar. This icon indicates that the cb31u is recognized. 18. Remove th...

  • Page 35

    W indows2000 2. Setup 33 2-4-2. Confirming the installation 1.Click my computer with right button and select properties.You will see the screen below. Click the hardware tab. Click on the device manager button. 2.You will see the screen below.Double-click the scsi pc card rex cb31 win2000 string..

  • Page 36

    W indows2000 2. Setup 34 3. You will see the screen below.Click the general tab.Make sure device status is “this device is working properly. ”. 4.Click driver tab and driver details button on the previous window shown at step 3.. You will see the screen below. You can find the file version. Click ok...

  • Page 37: 2-4-3. Removing The Cb31U

    W indows2000 2. Setup 35 5.Click the resources tab and make sure conflicting device list is no conflict. 2-4-3. Removing the cb31u when you want to remove the cb31u from the pc, you have to follow these steps through. 1. Click the pc card iconon the windows taskbar. 2. You will see the message sayin...

  • Page 38: 2-5. Windows Xp Setup

    W indowsxp 2. Setup 36 2-5. Windows xp setup here’s how to get started with the cb31u and scsi devices on windows xp: 1. Check the restrictions before you install the cb31u. 2. Install the cb31u into the pc. Refer to chapter 2-5-1. 3. Confirm the installation. Refer to chapter 2-5-2. 4. Remove the c...

  • Page 39

    W indowsxp 2. Setup 37 d. Click the device manager button. E. Double-click on the pcmcia adapters string and make sure there is a cardbus con- troller name string without “!” or “x” marks. If you find a intel pcic compatible pcmcia controller string under the pcmcia adapter, your pc card slot may no...

  • Page 40

    W indowsxp 2. Setup 38 f. Double-click the cardbus controller name string to show the property windows. If this device is working properly appears under the device status, you can use the cb31u. 2.Grasp the cb31u by the edges with the label facing upward. Insert the cb31u into the slot and push it i...

  • Page 41

    W indowsxp 2. Setup 39 4. Click my computer with right button and select properties. You will see the screen below. Click the hardware tab. And click on the device manager button. 5. Double-click on the scsi and raid controllers and find a advansys scsi host adapter string. Double-click the advansys...

  • Page 42

    W indowsxp 2. Setup 40 6. You will see the screen below. You will find this device is working properly under the device status. If device status is error, click the troubleshooting button. 7. Click driver tab. You will see the screen below. Click the update driver button..

  • Page 43

    W indowsxp 2. Setup 41 8. Select install from a list or spe- cific location and click next. 9. Select don’t search. I will choose the driver to install and click next. 10. Insert the floppy disk or the cd-rom included in this package. Click have disk button..

  • Page 44

    W indowsxp 2. Setup 42 11. Type cd-rom drive letter. (type a:\, if you insert floppy disk.) and click next. 12. Click next. 13. Click continue anyway on this screen..

  • Page 45

    W indowsxp 2. Setup 43 14. You will see the screen below. Take out the floppy disk or the cd-rom and click finish. 15. Click the driver tab and make sure if scsi pc card rex cb31 is shown. Click ok..

  • Page 46

    W indowsxp 2. Setup 44 16. If you find a scsi pc card rex cb31 under the scsi and raid controllers on the device manager, the cb31u is recognized..

  • Page 47

    W indowsxp 2. Setup 45 2-5-2. Confirming the installation 1. Click my computer with right button and select properties. You will see the screen below. Click the hardware tab. Click on the device manager but- ton. 2. Double click scsi pc card rex cb31 under scsi and raid controllers..

  • Page 48

    W indowsxp 2. Setup 46 3. Click the general tab. Make sure device status says “this device is working properly. ”. 4. Click driver tab and driver details button. You can find the driver version. Click ok..

  • Page 49: 2-5-3. Removing The Cb31U

    W indowsxp 2. Setup 47 5. Click the resources tab and make sure no conflict is shown at conflicting device list. 2-5-3. Removing the cb31u when you want to remove the cb31u from the pc, you have to follow these steps through. 1. Click the safely remove hardware iconon the windows taskbar. 2. You wil...

  • Page 50: 3. Using Scsi Devices

    48 3. Using scsi devices 3. Using scsi devices 3-1. Connecting the scsi device 1. Attach an external active terminator to the scsi device, as shown below. If the scsi device has an internal terminator and the switch, set it on state. Refer to the scsi device manual if you are not sure how to activat...

  • Page 51

    49 3. Using scsi devices 5. Attach the scsi connector on the other end of the scsi cable into a scsi device. If you have a scsi device with a db 25-pin, you can order the cable. Refer to chapter 10. 6. Turn on all the scsi devices connected to the cb31u. 7. Wait until access lights of the scsi devic...

  • Page 52

    50 3. Using scsi devices 3-2. Confirming scsi device connection 1. Open device manager. 2. Make sure the scsi device name string appears in the device manager. The following device manager in windows 2000 shows iomega zip drive is connected to the cb31u. 3. Double-click the scsi device name string. ...

  • Page 53: 4. Scsi Format Utility

    51 4. Scsi format utility 4. Scsi format utility you can format a hdd, jaz, mo, zip drive, etc., with format utility named rexfmt95.Exe. Note: you can not format cd-r, cd-rw or dvd-ram. Follow these steps through to format your scsi drive. 1. Make sure the scsi device is connected and powered on. 2....

  • Page 54

    52 4. Scsi format utility 6.You will see the window below. Select [initialize/format media] from the [edit] menu. 7.You will see the window below. Choose format type. If you want to do low level format simultaneousely, check the low level format check box. Then click ok..

  • Page 55

    53 4. Scsi format utility 8. A. If you have selected ibm-pc/at fdisk format at the step 7., the message box saying [you should create partition next] appears. Click ok. You will see the screen shown at the step 6. And select [create partition] from the [edit] menu to create partition. You will see t...

  • Page 56: 5. Installing Windows 95/98

    Ms-dos 54 5. How to install windows 95/98 5. Installing windows 95/98 this chapter explains how to make a startup floppy disk, how to access to a scsi cd-rom connected to the cb31u with the startup floppy disk. If you can accees to a scsi cd-rom with the startup floppy disk, you can install windows ...

  • Page 57

    Ms-dos 55 5. How to install windows 95/98 4.You will see the screen below. Select full in format type and check copy system files. 5.Click the start button.When format finish, remove the formatted disk and insert the the floppy disk for windows 95/98 included in this package. 6.Double-click the flop...

  • Page 58

    Ms-dos 56 5. How to install windows 95/98 5-2. Making a windows 95 startup floppy disk this section gives you information on how to make a startup flopply disk on your own when the mkdisk.Exe does not work. With the startup floppy disk, you can access to the scsi cd-rom drive connected to the cb31u ...

  • Page 59

    Ms-dos 57 5. How to install windows 95/98 5-3. Making a windows 98 startup floppy disk this section gives you information on how to make a startup flopply disk on your own when the mkdisk.Exe does not work. With the startup floppy disk, you can access to the scsi cd-rom drive connected to the cb31u ...

  • Page 60

    Ms-dos 58 5. How to install windows 95/98 ----------------------------- cbenable.Exe parameter -------------------------- format: device = : \ cbenable.Exe [irq] [io] [mem] parameter [irq] set irq number used by the cb31u. If you don’t set anything to this parameter, ah(10) is set as irq number. If ...

  • Page 61

    Ms-dos 59 5. How to install windows 95/98 --------------------------- aspcb3x.Sys parameter ------------------------------ format: device = : \ aspcb3x.Sys [/l] [/p] [/v] parameter [/l] lun(logical unit no). When you set this parameter, all lun will be searched. If you don’t set anything to this par...

  • Page 62

    Ms-dos 60 5. How to install windows 95/98 ----------------------------- rexcd.Sys parameter ------------------------------ rexcd.Sys is a cd-rom driver based on aspi manager for dos. Format: device = : \ rexcd.Sys [/d:][/u:1] [/scanid:id + id + …… ] [/noscanid: id + id + ……][/n:1][/e][/ha:0] paramet...

  • Page 63

    Ms-dos 61 5. How to install windows 95/98 --------------------------- rexdisk.Sys parameter ------------------------------ rexdisk.Sys is a driver for hard drives/mos based on aspi manager for dos. Rexdisk.Sys can use only fat12, fat16 file system. Rexdisk.Sys can not use fat32 file system. Format: ...

  • Page 64: 6. Installing Windows 2000

    W indows2000 6. How to install windows 2000 62 6. Installing windows 2000 this chapter explains how to install windows 2000 from a scsi cd-rom connected to the cb31u. If you upgrade windows 98, windows nt to windows 2000 , refer to chapter 6-1. If you install a new copy of windows 2000(clean install...

  • Page 65

    W indows2000 6. How to install windows 2000 63 6-2. Install a new copy of windows 2000 follow these steps through: 1.Format the hdd where you want to install windows2000 first. 2.Start setup program of windows2000 from the scsi cd-rom connected to the cb31u. 3.When setup starts,you can see two ways ...

  • Page 66: 7. Linux

    64 7. Linux linux 7. Linux 7-1. How to install the driver for linux this chapter explains how to install the cb31u driver for linux. To install the driver, development module is required for your linux. If you do not know how to set up development module, ask the distributor of your linux. Following...

  • Page 67

    65 7. Linux linux 3.Make driver module (1)copy the driver source file (cb31_cb.C) copy the driver source file named cb31_cb.C to the directory which includes pcmcia client driver source.(the directory normally means pcmcia clients directory) if there is the extracted driver source file named cb31_cb...

  • Page 68

    66 7. Linux linux 4.Install the driver module (1)copy the driver module file (cb31_cb.O) copy the driver module file named cb31_cb.Oto the directory which includes module related to pcmcia. # cp cb31_cb.O /lib/modules/2.2.12-32/pcmcia/. (2)edit pcmcia database (/etc/pcmcia/config) add the five lines...

  • Page 69

    67 7. Linux linux 7-2. Scsi configuration utility for linux:ascconf this section explains the instructions to set up the cb31u scsi configuration utility on redhat 6.1. Log in as root before setting up the cb31u scsi configuration utility. * instructions for making cb31u scsi configuration utility(a...

  • Page 70

    68 7. Linux linux * restriction to execute ascconf to execute ascconf, the driver modules of the cb31u need to be loaded. If the modules are not loaded , error message shows up like below. Not found host adapter sometimes, you might see following messages. Driver module does not active. You must con...

  • Page 71

    69 7. Linux linux --disc5=off : disable disconnect only with scsi-id 5 --sync_all= to set transfer rate for all scsi id (for example) --sync_all=10 : 10mb/sec for all scsi-id --sync_all=async : async. Transfer for all scsi-id --sync= to set transfer rate for spesific scsi id (for example) --sync3=10...

  • Page 72: 8. Troubleshooting

    70 8. Troubleshooting 8. Troubleshooting 8-1. Deleting the cb31u driver completely if you use windows 95/98/me, refer to chapter 8-1-1. If you use windows 2000, refer to chapter 8-1-2. If you use windows xp, refer to chapter 8-1-3. 8-1-1. Deleting the cb31u driver on windows 95/98/me if you failed t...

  • Page 73

    71 8. Troubleshooting 3. Remove the registry. A. Select run on the start menu. B. Type regeditinthe open box. C. Click hkey_local_machine,enumandpci. D. If scsi cardbus pc card rex cb31appears atdevicedescline, select the key and press the delete key. The example indicates that ven_10cd&dev_1300is s...

  • Page 74

    72 8. Troubleshooting 8-1-2. Deleting the cb31u driver on windows 2000 if you failed to install the cb31u driver and want to re-install it from the start, delete it first. Follow the steps through to delele the cb31u driver completely. 1. Remove the cb31u from the device tree. A. Click my computer w...

  • Page 75

    73 8. Troubleshooting 3. Remove the registry. A. Select run on the start menu. B. Type regeditinthe open box. C. Click hkey_local_machine,system, currentcontrolset, servicesandrexcb3x. D. If system32\drivers\rexcb3x.Sysappears atimagepathline, select the key and press the delete key. E. If no system...

  • Page 76

    74 8. Troubleshooting 8-1-3. Deleting the cb31u driver on windows xp if you failed to install the cb31u driver and want to re-install it from the start, delete it first. Follow the steps through to delele the cb31u driver completely. 1. Remove the cb31u from the device tree. A. Click my computer wit...

  • Page 77

    75 8. Troubleshooting 3. Remove the registry. A. Select run on the start menu. B. Type regeditinthe open box. C. Click hkey_local_machine,system, currentcontrolset, servicesandrexcb3x. D. If system32\drivers\rexcb3x.Sysappears atimagepathline, select the key and press the delete key. E. If no system...

  • Page 78

    76 8. Troubleshooting 8-2. Updating the cb31u driver for windows95/98/me 1. Download the updated driver from the ratoc web site.(http://www.Ratocsystems.Com/english/) 2. Make an updated support software floppy disk. A. Download cb31u_xx.Exe (tentative name) into an empty folder on the hard disk driv...

  • Page 79

    77 8. Troubleshooting e. Click on the properties button, then select the driver tab. F. Check the date before updating the driver. G. Click on the update driver... Button. If your windows is windows 95, follow 4. To update the driver for windows 95 procedure. If your windows is windows 98, follow 4....

  • Page 80

    78 8. Troubleshooting 4. To update the driver for windows 95. A. When the update device driver wizard window appears,insert the floppy disk made in the step 2. Make an updated support software floppy disk into the pc and select yes. Then click next. B. When the following window appears, click finish...

  • Page 81

    79 8. Troubleshooting c. If a message requesting insertion of a floppy disk appears, click ok. D. When copying files... Appears, you will see a message prompting you to insert the disk that is already in the floppy drive. Type a:\ for the source of files and click ok. E. You have finished updating t...

  • Page 82

    80 8. Troubleshooting 4. To update the driver for windows 98. A. When the update device driver wizard window appears, click next. B. When the following window appears, selectsearch for a better driver than the one your device is using now.(recommeded) and click next..

  • Page 83

    81 8. Troubleshooting c. When the following window appears, checkfloppy disk drives and insert the floppy disk made in the step 2. Make an updated support software floppy disk into the pc and click next. D. When the following window appears, check the updated driver (recommended) scsi cardbus pc car...

  • Page 84

    82 8. Troubleshooting f. When the following window appears, click finish. You have finished updating the driver. G. Remove the support floppy disk from the pc. E. When the following window appears, click next..

  • Page 85

    83 8. Troubleshooting 4. To update the driver for windows me. A. When the update device driver wizard window appears, select specify the location of the driver (advanced) and click next. B. When the following window appears, select search for a better driver than the one your device is using now.(re...

  • Page 86

    84 8. Troubleshooting c. When the following window appears, select the updated driver(recommeded) and click next. D. When the following window appears, click next..

  • Page 87

    85 8. Troubleshooting e. When the following window appears, click finish. You have finished updating the driver. F. Remove the support floppy disk from the pc..

  • Page 88

    86 8. Troubleshooting 5. Verify the driver is updated. A. In the scsi cardbus pc card rex cb31 properties window,click the driver tab. B. Make sure the date is later than the date you checked in the step 3-f before. C. Click thedriver file details...Button. D. Check the file version of the cb31u dri...

  • Page 89

    87 8. Troubleshooting 8-3. If your laptop is made by toshiba i can use 16-bit pc card with my laptop made by toshiba, but i can not get a cardbus pc card up and running. 1. Shut down your laptop. 2. Start your computer. 3. Press the esc key at boot time. 4. When check system. Then press [f1] key is ...

  • Page 90

    88 8. Troubleshooting 6. Scsi configuration windows will appear. If you connect fujitsu mo(m2512a, m2513a), select 10mb/sec.At translation. If you connect the asynchronous device, select async. Then click ok. For more information, refer to the explanation in the next page. 7. When thefollowing windo...

  • Page 91

    89 8. Troubleshooting scsi configuration utility window [pci burst mode] default is enable. If the pc does not support pci burst mode, check disable. [parity] default is enable. If you connect the device which does not have parity check function, check disable. [host scsi id] scsi id no. For the cb3...

  • Page 92

    90 8. Troubleshooting 8-4-2. Scsi configuration utility for windows 2000/xp the cd-rom which comes with the cb31u includes a scsi configuration utility. This may be required for scsi devices to change configuration. Before starting this utility, close all other programs running. Installation of scsi...

  • Page 93

    91 8. Troubleshooting scsi configuration utility window [pci burst mode] default is enable. If the pc does not support pci burst mode, check the disable button. [parity] default is enable. If you connect the device which does not have parity check function, check the disable button. [host scsi id] s...

  • Page 94

    92 8. Troubleshooting 8-5. ? Pcmcia card services appears there is “? Pcmcia card services” appears under other devices in device manager. This is not error. If pc cards which are not cardbus compatible are inserted, ? Pc card services appears under other devices. If it is removed, you cannot use pc...

  • Page 95

    93 8. Troubleshooting 8-9. Unknown device window appears when i connect a scsi scanner to the cb31u and start pc, the add new hardware wizard saying [this wizard searches for new drives for unknown device] appears and i do not know what to do. If unknow device means your scsi scanner. So, you need t...

  • Page 96

    94 8. Troubleshooting 8-10. When you can not finish windows 95/98 if your pc has an usb port and pc card inserted at the same time, you may not be able to shut down your pc. 1. Disable fast shut down. Refer to the help file for information on how to do it. 2. If you can not resolve this issue at the...

  • Page 97

    95 8. Troubleshooting 6. Select the resources tab and remove the check mark at the use automatic settings.And double- click input/output range. 7. Set value number larger than 1600 by clicking up/down button. 8. Make sure conflicting device list shows no conflict. 9. Click ok and restart your pc. If...

  • Page 98

    96 8. Troubleshooting 8-11. Slow access to ultra scsi hard disk access to the ultra scsi hard disk is slower than that to the fast scsi hard disk access speed depends on the computer. Try to uncheck command queuing on the scsi configuration utility. 8-12. When i can not detect a scsi scanner on wind...

  • Page 99

    97 8. Troubleshooting 8-13. When you can not assign a drive letter i can find the device name string in the device manager, but the drive icon does not appear in my computer. 1. If your computer is in a network and all the driver letters are full, the drive icon does not appear in my computer. To re...

  • Page 100: 9-1. How to Register

    98 9. Registration and tech-support 9-1. How to register we highly recommend to register yourself as our customer through our on-line registration. 1. On the internet, access our site (http://www.Ratocsystems.Com/english/) 2. Follow window menu guide to register. 3. Fill out and submit the registrat...

  • Page 101: 10. Options

    99 10.Options 10. Options optinal scsi cables are available (sold separately) at the web site: http://www.Firewireshop.Com -hd 50p scsi-ii cable (2 feet) -centronics 50p scsi-i cable (2 feet) -db 25p scsi-i cable (2 feet) -hd 50p female to centronics 50p male adapter if you have any questions about ...

  • Page 102: 11. Specifications

    100 11. Specifications 11. Specifications specifications of the cb31u scsi interface •ultra scsi (fast-20) •single ended scsi pc card •pc card standard compliant cardbus (type ii) data transfer rate •up to 20mb/sec with ultra scsi devices (synchronous) •up to 10mb/sec with scsi-ii devices (synchrono...

  • Page 103

    101 11. Specifications 2 1 15 14 3 16 11 10 24 23 12 25 13 pin signal pin signal 1 req 14 gnd 2 msg 15 c/d 3 i/o 16 gnd 4 rst 17 atn 5 ack 18 gnd 6 bsy 19 sel 7 gnd 20 dbp 8 db0 21 db1 9 gnd 22 db2 10 db3 23 db4 11 db5 24 gnd 12 db6 25 termpwr 13 db7 scsi cable connector pin assignment the following...

  • Page 104: Appendix

    Appendix trademarks -windows and ms-dos are registered trademarks of microsoft corporation. -advansys is a registered trademark of connectcom solutions, inc. -bios and miniport driver are copyrighted by connectcom solutions, inc. -other brand and product names may be registered trademarks or tradema...