Ratoc Systems U2SCXU User Manual - Macintosh

  Macintosh

51

A.Config Utility

In order to use this config utility, follow the steps:

Don’t remove the SCSI device from the U2SCXU.

1)Before you start this utility, you need to make sure of the following points:

   a)Open [Extensions Manager] at [Control Panels].

   b)Make sure your setting is [U2SCX Configuration] you made at step 3)

       in Chapter 3-2-1.

   c)Make sure the following drivers are enabled.

      -U2SCXUsermodeDriver

      -U2SCXUsermodeUTDriver

   d)Make sure the following drivers are disabled.

      -USB Authoring Support

      -Authoring Support

      -Disc Banner Extension

2)Make sure the U2SCXU is removed from a Mac and start the U2SCX

   Utility at the [U2SCX] folder. The following window will appear. Connect

   the U2SCXU to the Mac and click [OK].