Raumfeld Sounddeck Quick Start Manual - page 4
If you already use a Raumfeld device, you
can quickly and easily add new devices
under the “Settings“ menu option in the app.
It is not necessary carry out the initial setup
procedure again.
Notes
The Raumfeld Sounddeck is designed for
a HDMI cable connection to a television.
If you plan to use another type of connecti-
on, this can be confi gured under the “Device
Settings” menu option in the app.
1
2
5 Getting started
Check that your smart device is connected to
your home Wi-Fi.
Download the “Raumfeld Controller“ App
from the Play Store/App Store.
Locate your Wi-Fi password and keep it
ready.
After starting the app, follow the directions
step-by-step until the setup process is
complete.
6 Remote control
During the initial setup, it is necessary to establish
a connection between the remote control and the
Raumfeld Sounddeck.
Remove the plastic strips on the bottom of the
remote control.
During the initial setup, the remote control
must be held in the immediate vicinity of the
sounddeck. Press station buttons 1 and 4
simultaneously until the LED on the remote
blinks three times. If the LED instead blinks
10 times in quick succession, you will need to
carry out the procedure again.
1
2
3
4