2014 mincam push camera operation manual mc50 push system with kk55sl camera rauschusa.
Mincam manual 1 1. Table of contents 1. Table of contents ................................................................................................................ 0 2. Mincam system definition .................................................................................................. ...
Mincam manual 2 2. Mincam system definition 2.1 mc50 the mc50 system comes with one self-leveling camera attached to a cable reel built into one complete maintenance free cctv push system. 9.2mm push cable connects to self-leveling color push camera kk55sl, which can push through 4 ” (100mm) p-traps...
Mincam manual 3 3. Mincam setup 3.1 positioning of the system system can be operated from an upright position (see figure 3.1.A) or on its side for greater stability and control of the cable payout (see figure 3.1.B). 1. Loosen the pivot screw where the monitor (in the pelican case) connects to the ...
Mincam manual 4 4. Mincam control unit the control unit is the core of the mincam video camera system. Figure 4.A is the control unit of the mc50. Powers the system on or off. 4.1 battery indicator the 5 led lights show the current battery status. Red : charging green : 25%, 50%, 75%, or 100% batter...
Mincam manual 5 5. Mincam recording unit / monitor 5.1 system setup by default, the live camera feed is sent to the monitor directly with 4:3 picture format. (see figure 5.1.A) to record video, the live camera feed must first be passed through the sd card. This is controlled by the “toggle button”. ...
Mincam manual 6 5.2.4 screen adjustment pressing the “toggle button” while recording video will switch to direct camera feed. This removes the black bars from the side. Although you no longer see the red square, you are still recording. 5.3 take a picture press the camera button to store a picture: ...
Mincam manual 7 5.4.1 preview videos videos are stored in the hvr folder in the file browser. 1. Enter the file menu: 2. Choose “view all” 3. Choose folder “hvr” (see figure 5.4.1.A) videos are further organized into two subfolders: date and hour 4. Choose “date” 5. Choose “hour” use , to go to prio...
Mincam manual 8 5.5 settings menu open the settings menu by pressing the “menu button” from the “pass through” video recording feed. The menu will not open when toggle is set to “direct feed.” the menu has 3 settings: 1. Microphone default: 9 db - mute microphone setting 2. Storage card default: ful...
Mincam manual 9 6.2 kk55sl roller skid ( greater than 5”) the kk55 roller skid has a two-step installation procedure (see figure 6.3.A): 1. Slide the kk55 camera into the back of the skid. 2. Spin the screws on the bottom of the skid to hold the camera in place. 6.2.1 kk55sl exchange rolls (greater ...
Mincam manual 10 7. Mincam system specifications mc50 cable reel cable: 200 ft. (60m) of 9.2mm fiberglass push cable, up to 260 ft. (80m) 512 hz sonde standard (33 khz special order) electronic on-screen distance counter. Lithium ion battery for more than 1.5 hours operation. Power supply: 100 - 240...
