Rautz HC-7852UX Service Manual - page 9
Connecting to Equipment
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
●
Connecting the supplied FM antennas
●
Connecting the USB device of Fresh memory type
●
Connecting to Audio Equipment
◆
Adjusting the position of the FM antenna
While listening to an FM program, extend the antenna and move it in
various directions until the clearest signal is received, then secure the
antenna with push pins in the position with the least distortion.
◆
Before connecting
●
Refer also to the instruction manual of each USB Device to be connected.
●
Connect the plugs securely.
◆
After connecting
●
Before using the USB devices, press DIGITAL button on remote controller
to enter USB device mode.
USB function works only under the condition that the display shows “USB”
at USB device mode.
(located on the front side of the unit,
behind the jack cover)
(located on the front side of the unit,
behind the jack cover)
●
Connecting to Audio/Video Equipment
◆
Before connecting
●
Refer also to the instruction manual of each component to be
connected.
●
When you connect the machine to audio/video equipment, be sure to
turn off the power and unplug all the units from the wall outlets before
making any connections.
●
Connect the plugs securely.
To
video input
To
audio output