Product overview the ravelli aplt2 is a very light tripod that can extend to a height of 50”. With a weight of just over 1 lb, this tripod will not weigh you down. This tripod is constructed of aluminum legs and a hard polyurethane head. It has the ability to change the cameras orientation from port...
Identifying the parts.
Using the tripod initial set up to begin using the tripod, open the carrying bag using the zipper and pull the tripod out of protective bag. Height adjustment adjusting the height of the aplt2 is done by snapping open the black leg locks (g), extending the legs down to the desired height, and then s...
Storage to protect the tripod, it is recommended that you store it in the carry bag when not in use. Caution: there is a tipping risk for the fully extended tripods. This can be due to moving the tripods while fully extended, uneven surfaces or [strong] wind. To reduce the risk of tipping over, we r...
Specifications model: aplt2 model tripod max load: supports up to 5 lbs panning angle: 360° tilt angle: 180°, 90° upward or 90° downward dimensions: storage height: 16.5” maximum height: 50” minimum height: 15.75” mass: tripod: 1.3 lbs shipping weight: 2.5 lbs mounting plate screw: 1/4” mounting pla...
