The 2015 raven audio goldfinch tabletop audio system!.
The power supply input ac voltage can be changed upon customer request: 100v, 120v, 220v & 240v – 50/60 cycle.
The goldfinch multi-component system: dac / preamp-headphone amp / power amp goldfinch: the rear panels.
The power amplifier speaker output – 6 ohm rca inputs – from preamplifier power input – from power source specifications: tube complement - (2) 12au7 first stage amplification & phase inverter/splitter - (4) 6aq5/6005 power amplifier tube frequency range 25hz ~ 20khz power output: 7.5 watts per chan...
The preamplifier preamplifier output gain – 0db rca inputs – from source – (1 stereo) r&l balanced (2 stereo) r&l single ended rca power input – from power source specifications: tube complement - (2) 12at7 first stage amplification - (1) 6dj8/6922 cathode follower headphone output .5 watt per chann...
The dac inputs: usb 2.0 / optical outputs: rca 2.1 volts rms 1/8” headphone amp output 35 ohm (not recommended for under 30 ohm) volume & trim: the volume is for the faceplate and headphone output, and for the terminals on the rear panel that say “dac output”. The output gain volume knob is for the ...
Raven audio – goldfinch dac specifications 1. D/a converter: texas instruments pcm 1793 a. 24bit 192khz sampling, 8x oversampling digital filter b. Dynamic range: 113db c. Thd+n: 0.001% d. Sampling frequency: 10khz to 200khz 2. Digital controller: cirrus logic cs8422 a. 24bit 192khz asynchronus samp...
The raven audio goldfinch tabletop audio system is a complete audio system that fits within a 9” wide by 12” deep footprint if you stack every cabinet in a single stack. However it is designed so you can stack in anyway you wish. Side by side on a single shelf, two plus two for two stacks of two eac...
Call me if you have a question and i will try to help. Sincerely, dave thomson raven audio 131 carlisle chita cemetery rd. Trinity, texas 75862 936-662-5100 dave@ravenaudio.Com notes:.