Rayburn 400K (P/F) User Instructions - page 7
7
Using the Automatic Cooking Facility
Fig. 7
DESN 517070
AUTOMATIC COOKING CONTROL
This can be used to set an automatic cooking
programme. It switches the oven on and off at the pre-set
times.
The maximum length of cooking programme which can
be set is 23 hours and 59 minutes e.g. a delay time +
cooking time = maximum 23 hours and 59 minutes.
Before setting a programme, check that the clock is telling
the correct time of day, and have the following information
to hand.
• The length of time the food needs to cook.
• The time that the food is to finish cooking.
• The oven control setting required.
Fig. 8
DESN 517071
Fig. 9
DESN 517072
Fig. 10
DESN 517073
To Start and Stop the Oven Automatically
Before you set the clock for automatic operation you
must have two numbers clearly in mind - the 'cook
period' and the 'stop time'.
Note: You cannot set a start time directly - this is set
automatically by setting the 'cook period' and the 'stop
time'.
Press and hold the button (Fig. 10) and then press
the [+] button (or [-] button) until the required 'cook
period ' shows (Fig. 11).
•
The 'cook period', which is the length of time you
want the oven to cook for.
•
The ‘stop time’ which is the time of day you want the
oven to stop cooking.
Setting a Cook End Time
Press and hold the ‘stop time' button (Fig. 8) and
then press the [+] button (or [-] button) until the required
'stop time' shows (Fig. 9). The symbol and [AUTO]
will show in the display.
Once the 'stop time' is reached, the beeper sounds and
the [AUTO] symbol flashes. Turn the oven control knob
to 0 and then press any button to stop the beep. Press
to return to manual cooking.
Setting a Cook Duration
Press and hold the button and set the required 'cook
period' by pressing the [+] button (or [-] button) (Fig. 7).
The clock will now control the cook period of your oven.
The
symbol and [AUTO] will be displayed.
Once the 'cook period' is reached, the beeper sounds
and the [AUTO] symbol flashes . Turn the oven control
knob to 0 and then press any button to stop the beep.
Press to return to manual cooking.