Summary of Hidex HXII
Page 1
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C industrial grade modems hidex hxiixxty user’s guide.
Page 2
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page i raymar information technology, inc. 7325 roseville road sacramento, ca 95842 800-695-1951 fax: 916-783-1952.
Page 3
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page ii the products and programs described in this user’s guide are licensed products of raymar-telenetics. This user’s guide contains proprietary information protected by copyright, and this user’s guide and all accompanying hardware an...
Page 4
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page iii table of contents 1. Description............................................... ………………….Page 1 2. Product specifications ..................... ……………….…page 1 3. Compliance to global telephone standards....Page 3 4. External power...
Page 5
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page 1 of 15 description the hidex hxii industrial grade modem is the most versatile model for dial-up or leased analog telephone line interconnects. The hidex hxii56tm offers speeds up to 56kbps over the analog switched telephone network...
Page 6
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page 2 of 15 category description operating voltage hxiixxtm 5 vdc ± 5% absolute maximum supply voltage: 5.5 vdc option a 9 to 18 vdc via power connector. Option b 18 to 36 vdc via power connector. Option c 36 to 72 vdc via power connecto...
Page 7
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page 3 of 15 automatic symbol and carrier frequency during start-up, retrain, and rate renegotiations dtmf detection callback security distinctive ring voice record and playback call status display, auto-parity and data rate selections ke...
Page 8
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page 4 of 15 external power sources the native power for model hxiixxtm is 5vdc to the power connector or via db25 connector. The power options a, b & c are internal and change the external power to be supplied via the barrel connector (p...
Page 9
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page 5 of 15 power connections there are two optional methods of supplying power to the modem. Use the power connector or via the rs232 cable. A slide switch on the side of the case selects which is used. Included with each modem is the m...
Page 10
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page 6 of 15 +5v power input select switch ground screw safety ground connection ground jumper option use the green case cover screw to connect a safety ground wire if desired data interface data is interfaced via a db25 female connector....
Page 11
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page 7 of 15 hardware setup setup procedure: 1. Use an rs-232 cable to connect the db25 connector (j1) on the modem to a pc serial port (typically com1). 2. Connect the rj11 connector to a phone line. 3. Connect external power +5vdc to th...
Page 12
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page 8 of 15 dial line setup to communicate using the modem, use an asynchronous communication program. The command set for the modems is compatible with the hayes command set. The modem is controlled and configured by the at (attention c...
Page 13
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page 9 of 15 leased line modem setup for hxii56tm first, always set the terminal data speed to something below the modems transmit speed i.E. Terminal speed set to 9600 bps and modems connect at 32 kbps. This is to prevent the modems buff...
Page 14
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page 10 of 15 at command summary organization of at commands on the following pages: 1st, by the initial command character (&, +, %) 2nd, alphabetized by the second command character (except for listing of at ). Command description at att...
Page 15
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page 11 of 15 command description &gn v.22bis guard tone control &kn flow control selection &ln leased line operation (hxii56tm only) &pn pulse dial make-to-break ratio selection &qn asynchronous communications mode &sn data set ready (ds...
Page 16
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page 12 of 15 command description #cbd n callback delay # cbf? Callback failed attempts display # cbfr callback failed attempts reset # cbi n local callback inactivity timer # cbn y=n store callback password # cbp n callback parity # cbr ...
Page 17
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page 13 of 15 raymar information technology, inc. Limited warranty one year limited hardware warranty raymar information technology, inc., dba raymar-telenetics, warrants their products against defects in hardware, material and workmanshi...
Page 18
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page 14 of 15 raymar information technology, inc. Return merchandise authorization (rma) procedure before returning any raymar-telenetics product, an rma number must be obtained. The most convenient way to obtain an rma number for a produ...
Page 19
0049-3400-xxx hidex hxiixxty – user’s guide 08/18/2010 rev. C page 15 of 15.