Raymarine 530 Owner's Handbook Manual - 2.3 Controlling The Display
2-6
SL520/530/631 PLUS Chartplotter Displays
C
on
tro
llin
g th
e
Display
2.3 Controlling the Display
You control the display using the cursor and control keys. You start all
operations from the default screen, that is the default soft keys are displayed:
When you have completed an action using the soft keys, press ENTER or
CLEAR to return to the default screen; you may need to press ENTER or
CLEAR several times to back-track through the soft key hierarchy.
Note: If you have set up your system so that the default soft keys are not dis-
played all the time, press any soft key to display the labels.
The remainder of this section describes how to select the mode of operation
and switch half-screen windows on/off. The following sections describe how
to set up the display.
The controls are summarized in the fold-out illustration on page 2.8.
Selecting the Mode of Operation
You use the DISPLAY key to select the full-screen mode.
The following modes can be selected:
•
Chart
•
Data log
The DISPLAY key also accesses the soft keys for the half-screen window
options.
➤ To change the mode, press the DISPLAY key to show the DISPLAY pop-up, then
press again to toggle between chart and data log modes.
The selected mode is shown by an icon with a red border and the mode is
displayed on the screen. The associated half-screen window soft keys are also
displayed.
When the required mode is shown, press ENTER or CLEAR. The default soft
keys are displayed. The selected mode is shown full-screen; in Chart mode
you can switch on half-screen windows for additional display, as described in
the following section.
If you press DISPLAY again, the pop-up and soft keys for the current mode are
shown.
GOTO
SCREEN
ROUTE
FIND SHIP
D4160-1
DISPLAY