St30 round bidata owner’s handbook document number: 81075_4 date: 1st april 2001 075_4cov.P65 11/04/01, 11:27 1.
Copyright © raymarine limited 2001 075_4cov.P65 11/04/01, 11:27 2.
Preface i important information warning although your st30 instrument is designed to give accurate and reliable performance, it should serve only as an aid to navigation and should never lead to the erosion of good seamanship. Always maintain a permanent watch and be aware of situations as they deve...
Ii st30 round bidata owner’s handbook 075_4pre.P65 11/04/01, 11:27 2.
Preface iii contents important information .......................................................... I warning ......................................................................... I emc conformance ............................................................. I handbook information ..............
Iv st30 round bidata owner’s handbook condensation ............................................................... 7 cables .......................................................................... 8 2.2 fault finding ................................................................ 8 chapter 3: ins...
Preface v exit intermediate calibration without saving ............. 19 default display .......................................................... 20 4.3 extended calibration ................................................. 20 calibration ...............................................................
Vi st30 round bidata owner’s handbook 075_4pre.P65 11/04/01, 11:27 6.
Preface vii preface thank you for purchasing a raymarine product. We are sure your st30 instrument will give you many years of trouble-free operation. This instrument is designed to provide reliable performance, even under the most demanding conditions. Bidata depth speed depth speed d1601-2 075_4pr...
Viii st30 round bidata owner’s handbook parts supplied d1603-3 se a ta lk se a ta lk bidata depth speed depth speed se a ta lk st30 round bidata owner's handbook worldwide distributors notes: the items shown are supplied for an st30 round bidata system. If an instrument is purchased separately, a tr...
Chapter 1: operation 1 chapter 1: operation 1.1 introduction the st30 round bidata instrument is designed for the powerboat market, and displays speed and depth information simultaneously on a split lcd. The bidata can also display trip and log distances, sound a user-defined shallow alarm, and func...
2 st30 round bidata owner’s handbook 1.2 depth key functions the following flow chart shows the depth key functions. D1763-2 bidata depth speed depth speed water depth offset shallow alarm water depth depth is displayed in feet (0 to 400 ft) or metres (0 to 120 m). Shallow alarm the shallow alarm di...
Chapter 1: operation 3 silencing the shallow alarms press speed or depth to silence the audible alarm for a period of two minutes. If, after 2 minutes, the water depth is still below the alarm setting, the alarm will be activated again. Note: when the audible alarm is silenced the alarm icon continu...
4 st30 round bidata owner’s handbook 1.3 speed key functions the following flow chart shows the speed key functions. Speed log trip d1764-2 bidata depth speed depth speed speed the speed display can be either knots ( kts ), miles per hour ( mph ), or kilometres per hour ( kph ). Trip distance trip i...
Chapter 1: operation 5 1.4 lcd illumination high (l3) low (l1) medium (l2) d1765-2 bidata depth speed depth speed off (l0) 1 second the bidata has four illumination settings, off, low ( l1 ), medium ( l2 ), and high ( l3 ). The bidata automatically returns to normal operation 5 seconds after the las...
6 st30 round bidata owner’s handbook 075_4c01.P65 11/04/01, 11:27 6.
Chapter 2: maintenance and faultfinding 7 chapter 2: maintenance and fault finding 2.1 maintenance servicing and safety • raymarine equipment should be serviced only by authorised raymarine service technicians. They will ensure that service procedures and replacement parts used will not affect perfo...
8 st30 round bidata owner’s handbook cables periodically examine the seatalk, biducer, and power cables for evidence of damage to the outer shield, and if necessary, replace with genuine raymarine cables. 2.2 fault finding if you appear to have a problem with your bidata unit, please refer to this t...
Chapter 3: installation 9 chapter 3: installation 3.1 introduction please read this chapter thoroughly before attempting to install the instrument and transducer. Always use genuine raymarine cables. The use of unapproved/inferior cables, for which raymarine cannot be held liable, could affect the p...
10 st30 round bidata owner’s handbook • the equipment is supplied from a separate battery from that used for engine start. Voltage drops below 10 v in the power supply to our products, and starter motor transients, can cause the equipment to reset. This will not damage the equipment, but may cause t...
Chapter 3: installation 11 89.1 mm (3.5 in) 94.15 mm (3.7 in) 17 mm (0.67 in) 37.5 mm (1.47 in) 54.5 mm (2.15 in) 84.4 mm (3.32 in) 94.15 mm (3.7 in) d1598-2 bidata depth speed depth speed caution where it is necessary to cut holes (e.G. For cable routing and instrument mounting), ensure that these ...
12 st30 round bidata owner’s handbook 3. Pass the seatalk and transducer cables through the seal. Plug these cables into appropriate instrument ports. 4. Secure the instrument using the fixing studs, “c” bracket, and thumb nuts as shown. D1600-2 bidata depth speed depth speed 3.3 connecting the powe...
Chapter 3: installation 13 3.4 power via seatalk caution ensure that the power supply is protected by a 5 a fuse or circuit breaker. If the bidata is to be used with other seatalk instruments, the power supply is passed from instrument to instrument via the daisy loom cable as shown. 3.5 adding an i...
14 st30 round bidata owner’s handbook 3.6 installing the biducer transducer the st30 round bidata is supplied with a combined speed and depth transducer (biducer). This should be installed in accordance with the instructions provided. Cable connections the cable from the biducer consists of five cor...
Chapter 4: calibration 15 chapter 4: calibration 4.1 introduction this chapter describes how to set and adjust features contained in the basic, intermediate, and extended calibration menus. The calibration procedures must be carried out before the equipment is used operationally, to optimise the per...
16 st30 round bidata owner’s handbook bidata depth speed depth speed cal 2 sec depth units offset log calibration log units d d d d d5040-2 if cal off is displayed, press depth or speed to return to normal operation then use the extended calibration procedure to turn on basic calibration. Offset ent...
Chapter 4: calibration 17 2. Use the depth key to increase or speed to decrease the displayed offset. 3. Press depth and speed together momentarily to exit edit mode. Biducer negative offset actual water depth d1762-2 biducer positive offset actual water depth d1766-2 depth units the available depth...
18 st30 round bidata owner’s handbook approximately 1nm point 1 point 2 d699-2 procedure 1. With the trip display active, motor from “point 1” to “point 2” and record the distance displayed by the bidata. 2. Motor from “point 2” to “point 1” and record the displayed distance. 3. Add the recorded dis...
Chapter 4: calibration 19 bidata depth speed depth speed 6 sec repeater version d d5041-1 software version displays the bidata software version. Repeater the bidata can be used as a master instrument connected directly to the transducer, or, alternatively, as a repeating unit displaying speed and de...
20 st30 round bidata owner’s handbook default display the bidata returns to normal operation 8 seconds after the last key press. 4.3 extended calibration use the following flow chart to carry out extended calibration. The extended calibration features illustrated below are cycled using the depth key...
Chapter 4: calibration 21 calibration this screen controls access to basic calibration, to protect the settings from accidentally being changed. Use the speed key (toggle action) to select the required setting: cal on ( 1 ) or cal off (0). Boat show this is a simulation program for dealer use only: ...
22 st30 round bidata owner’s handbook 075_4c04.P65 11/04/01, 11:27 22.
Chapter 6: specification 23 specification voltage range: 10 v to 16.5 v maximum (12 v nominal) size: 94.15 mm x 54.5 mm depth range: 0 to 120 metres 0 to 400 feet speed range: 0 to 99.9 knots, mph, or kph trip: 0 to 999 nm, sm, or km log: 0 to 5999 nm, sm, or km shallow alarm: 3 to 33 feet 1 to 10 m...
24 st30 round bidata owner’s handbook 075_4spe.P65 11/04/01, 11:28 24.
St30 round bidata template cut hole to 86 mm (3 /8 in) diameter (max.) 3 cut out shaded area only 075_4tem.P65 11/04/01, 11:28 1.
075_4tem.P65 11/04/01, 11:28 2.
Document number: 84064-8 april 2001 limited warranty certificate raymarine warrants each new light marine/dealer distributor product to be of good materials and workmanship, and will repair or exchange any parts proven to be defective in material and workmanship under normal use for a period of 2 ye...
Factory service centers united states of america uk, europe, middle east, far east raymarine inc 22 cotton road, unit d nashua, nh 03063-4219, usa raymarine ltd anchorage park, portsmouth po3 5td, england telephone: +1 603 881 5200 fax: +1 603 864 4756 www.Raymarine.Com telephone: +44 (0)23 9269 361...